How much to replace the glass on Xiaomi Redmi 5: prices 2026, where cheaper and how not to pay

Cracked or broken glass on Xiaomi Redmi 5 is a problem that almost every owner of this budget smartphone faces. Even with careful use, falling from a height of 50 cm or hitting a hard surface can lead to a web of cracks, or even complete destruction of the display module. The main question that worries users is how much will it cost to repair and where to make it more profitable – in a service center, at a private master or on their own?

In this article, we will analyze the current prices for 2026 (taking into account inflation and currency changes), compare the cost of original and non-original glass, and tell you how to distinguish high-quality repairs from hacks.

Let's warn you right away: Redmi 5 (m1803e7sg for the global market) is a budget device of 2018, and official support for the manufacturer for it has long been discontinued. This means that original parts are now extremely rare, and their cost can be unreasonably overstated, while the market is full of cheap counterparts that last from a week to six months, we will help you figure out which option to choose in your situation.

Finally, if you're considering a self-replacement, we'll give you a step-by-step instruction with a list of tools and a score of the complexity of the procedure. The glass on Redmi 5 sticks to the touchscreen, so replacing it without special skills can lead to a loss of screen sensitivity or dead zones. But with due care, it's possible to do this at home, as long as you don't skimp on glue and tools.

1.How much does it cost to replace glass with Xiaomi Redmi 5 in 2026: price comparison

The cost of repair depends on three key factors: the type of glass (original / analogue), the region (prices in Moscow and regional cities can vary by 30-50%), and the status of the service (the official partner of Xiaomi, a private workshop or “garage” repair).

It’s important to understand that the original glass for Redmi 5 today is either leftovers from warehouses (which is unlikely) or re-labeled premium counterparts "OEM-"Spare parts" are non-original parts, but they're made in the same factories as the original parts, and they can be as good as the brand parts, but they're 40 to 60 times cheaper%.

Cheap Chinese counterparts (often advertised as “1:1 copies”) last an average of 3-6 months, are thinner, less durable, and often have coating defects (for example, quickly scratched or yellowed over time).

Prices are indicated only for glass without work. The cost of replacing the service varies from 800 to 2,000 rubles depending on the complexity (for example, if only the glass cracked, and the touch screen is intact, repair will cost less). Full replacement of the display module (glass + touch screen + matrix) will cost 3,000-4,500 rubles.

Where is it cheaper to replace glass: comparison of services

Choosing a repair site is always a compromise between price, quality and warranties.

• 🏢 Xiaomi’s official service centers: they give a 6-12 month warranty, but prices are 30-50% higher than privately owned ones, plus they use proven spare parts (though not always original). Minus – long wait (from 3 days) and often impose additional services (for example, diagnosis for 500 rubles).
• 🛒 Online parts stores: if you buy glass yourself, pay attention to the seller's rating and reviews with a photo. On AliExpress you can find options from 400 rubles, but delivery will take 2-4 weeks. The risk of getting married is about 15%.

The hidden commissions that are often overlooked are:

⚠️ Note: Many services indicate the price only for glass, but eventually add a fee for "removal / installation" (500-1000). ₽), "cleaning of the shell” (300) ₽) or “post-repair check” (200) ₽). Always check the full cost before starting work!

If you choose between an official service and a private workshop, focus on the price/guarantee ratio. For example, in Moscow, replacing glass in the official center will cost 3,500-4000 rubles with a warranty of 1 year, and a privateer – 2,000-2500 rubles, but with a guarantee of only 1-3 months. The difference of 1,500 rubles may not be worth it if you plan to use the phone for another year or two.

3. Original vs Analog: What to Choose for Xiaomi Redmi 5

The main myth that some services spread is that "only original glass guarantees long-term performance." In practice, this is not quite true for Redmi 5. The fact is that the original glass for this model is no longer produced, and the ones that remained in warehouses often lay in improper conditions for years (which affects the adhesive layer).

Premium analogues (OEMs) from proven manufacturers (such as Tianma or BOE) are as good as the original, and sometimes even superior, due to improved oleophobic coating (fingerprint protection), the main thing is to buy them from trusted suppliers.

How to distinguish a quality analogue from junk:

• 🔍 Glass thickness: the original and good analogues have a thickness of 0.55-0.7 mm Budget fakes are thinner (0.3-0.4 mm), so less durable.
• 🎨 Color of the coating: the original and OEM-The black frame around the screen is matte and uniform, and in cheap copies it often shines or has divorces.
• 🧲 Magnetic test: Hold a magnet to a glass, and if it attracts, it's a cheap metallized layer, which cracks quickly).
• 📦 Packaging: original glass comes in vacuum-packed, protective film, and analogues are often packaged in bubble-like film without vacuum.

If you are offered "original glass" for 1,000 rubles - it is 100% fraud. Even OEM-analogues of this level cost from 1,800 rubles. The best option for Redmi 5 - a premium analogue for 2,000-2,500 rubles with a guarantee of 6+ months.

4. Self-replacement of glass: step-by-step instructions

If you decide to repair yourself, you will need:

• 🛠️ New glass (preferably with already applied glue layer).
• 🔥 Hair dryer or heat tile for softening glue (power of at least 1000 W).
• 🧷 Plastic mediators (to separate glass from touchscreen).
• 🧴 Clay. B-7000 or LOCA (if the glass is glue-free).
• 🧲 Magnetic screwdriver for screw unscrewing.
• 📱 Suction cups for fixing glass during installation.

Step-by-step process:

1. Warm up: Heat the glass with a hair dryer (60-80°C) for 2-3 minutes to soften the glue. Don't overheat - you can damage the matrix!
2. Glass separation: gently pull the glass with the mediator from the corner. Move slowly so as not to damage the touchscreen plumes.
3. Clean: Remove the glue residue from the touchscreen with alcohol or acetone. Do not use metal scrapers!
4. Installation of new glass: If the glue is already applied, just apply the glass and press it. If not, apply the B-7000 glue in a thin layer, then glue the glass and place the phone under the press (for example, between two books) for 12 hours.
5. Check: After drying the glue, check the sensitivity of the screen in the Settings menu → System → About the phone → Equipment Test.

⚠️ Warning: If the glass "goes away" at the edges after replacement or iridescent swellings appear, this is a sign of poor gluing. You need to repeat the procedure with new glue, otherwise dust and moisture will clog under the glass.

The most difficult part of the separation of old glass is that if it splits into small pieces, the process can take several hours. Professionals use special lamination machines that uniformly glue the glass without bubbles. At home, it is difficult to achieve the perfect result, but possible with due care.

💡

If you're afraid of damaging touchscreen plumes, practice on a non-working phone of the same model, which is often sold on Avito for 300-500 rubles.

5. Frequent mistakes when replacing glass and how to avoid them

Even experienced craftsmen sometimes make mistakes that lead to re-repair, and here are the most common mistakes and how to prevent them:

• 🔥 Overheating matrix: if you keep the hair dryer too close or too long, you can melt the LEDs backlight. The optimal distance is 5-7 cm, the temperature is not higher than 80°C.
• 💧 The impact of the stain on the stains: if the B-7000 or LOCA If you hit the touchscreen contacts, the screen will stop responding to the touch. Always cover the plumes with paint tape before gluing.
• 🌀 Air bubbles: They occur when the glass is unevenly glued or the glue is applied unevenly. To avoid this, use a vacuum bag or press.
• 📵 Loss of sensitivity: If the screen reacts poorly to touch after replacing it, it means that the glass is too tightly glued or the plume is damaged.
• 🔋 Battery discharge during repairs: If the phone runs out in the process, the touchscreen calibration may be lost.Always start repairs with a charge of at least 50%.

Another common problem is the color mismatch between the glass and the body: cheap ones often have a darker or gray bezel, which spoils the appearance of the phone. If you care about aesthetics, order a glass marked "color match".

If after the replacement, dead zones (sections of the screen that do not respond to touch) appear, this may mean:

💡

After the glass was replaced, the phone stopped seeing SIM-The problem is not the glass, it's the antenna plume, and it's probably damaged in the disassembly.

Alternatives: when glass replacement is not feasible

Sometimes, glass repairs on the Xiaomi Redmi 5 cost more than the phone itself, and in such cases, it makes sense to consider alternatives:

• 📱 Buy used Redmi 5 in good condition: on Avito or Yula you can find a device with a whole screen for 2,500-3,500 rubles. + touchscreen.
• 🔄 Exchange for a new model: some communication salons (for example, Messenger or MegaFon) accept old phones in trade-in. For Redmi 5 you can get a discount of 1,000-1 500 rubles for a new smartphone.

When you should not repair Redmi 5:

⚠️ Note: If the phone is released before 2019, has a worn-out battery (blown or fast-discharged) and a weak processor (Snapdragon 450), attachment of 3,000+ It is better to save for a budget new model (for example, Redmi). 12C or POCO C50).

If you still decide to sell a phone with a cracked screen, indicate in the ad the real condition. In the secondary market Redmi 5 with broken glass (but a working touchscreen) costs 1,000-1 500 rubles. With a full screen — 2,500-3000 rubles.

FAQ: Frequent questions about changing the glass on Xiaomi Redmi 5