The plume in a Xiaomi smartphone is a thin flexible cable that connects a display, camera, buttons or battery to the motherboard. Its damage can lead to a flicker of the screen, broken buttons or even a complete sensor failure. If your Redmi, POCO or Black Shark started to glittle after falling or getting moisture, it is likely the plume is to blame. But how much does it cost to repair it, and can you save?
In this article, we will analyze the current prices for replacing the plume in 2026 for different Xiaomi models, tell you how to determine the breakdown yourself, and give tips where it is better to repair – in a service center or from private craftsmen. You will also learn why replacing the camera plume or display in models with a AMOLED-screens (for example, Xiaomi 13 Pro or Redmi) K60 Ultra) can cost 2-3 times more than in budget POCO M5.
Signs of a malfunction of the plume in the Xiaomi phone
The plume is a vulnerable element of the smartphone, which often suffers from mechanical damage or wear, and here are the main symptoms that indicate its failure:
- 📱 The screen flickers or colored stripes appear (especially when you press the body).
- 🔄 The sensor does not respond to touch or is delayed.
- 📷 The camera does not focus or gives an error "I failed to connect to the camera".
- 🔋 The phone does not charge (if the battery plume is damaged).
- 🔊 Do not work speakers or microphone (in models with removable top panel).
If you notice any of these signs, don't be too quick to change the entire display or camera module. In 70 percent of cases, the problem is solved by replacing the plume, which is cheaper.+ replacement of the display plume is worth ~1 500 ₽, While the new screen will cost 5,000 to 7,000 ₽.
⚠️ Note: If the phone stopped turning on after falling, don’t try to disassemble it yourself! LPDDR5-memory (for example, Xiaomi 14 or Black Shark 6 Pro) improper removal of the plume can damage contacts on the motherboard, which will lead to an increase in the cost of repairs by 30-50%.
The cost of repairing the plume in 2026: a comparison of models
The price of a plume replacement depends on the phone model, the type of plume (display, cameras, buttons) and the complexity of the work. Below is the current price table for popular Xiaomi devices in service centers and private craftsmen (Moscow, St. Petersburg, regions).
| Model phone | Type of plume | Cost (₽) | Notes |
|---|---|---|---|
| Redmi Note 12 Pro+ | Display | 1 200–1 800 | Includes disassembly and diagnosis |
| POCO X5 Pro | Cameras (main module) | 1 500–2 200 | Price higher due to complex fastening |
| Xiaomi 13 Ultra | Display (AMOLED) | 2 500–3 500 | Special glue is required for sealing |
| Redmi A2+ | Power/volume buttons | 800–1 200 | Budget models are cheaper to repair |
| Black Shark 5 Pro | Battery plume | 1 800–2 500 | Complex design with cooling system |
Note that the table shows the price of the work only, the cost of the train itself can vary from 300. ₽ (for budget Redmi) up to 2,000 ₽ (Private craftsmen often offer cheaper, but the risk of running into poor-quality parts is higher. In official service centers Xiaomi use original parts, but the price there is 20-30% higher.
💡
Before repair, ask the master to show the damaged plume! Often under the guise of "replacement of the plume" offer to change the entire display module, which is 3-4 times more expensive.
Where to repair: service center vs private master
The choice of the repair site depends on your budget, time and guarantees.
- 🏢 Official Xiaomi Service Center: ✅ 6-12 months guarantee for work and spare parts. ✅ Original plumes (especially important for flagships). ❌ Expensive (30-50% higher than privately owned). ❌ Long term (from 3 to 7 days).
- 🔧 Private workshop: ✅ Price down 20 to 40%. ✅ Quick repairs (1–2 hours). ❌ Risk of poor quality parts (especially for new models). ❌ 1-3 month warranty or no warranty.
For models older than 2 years (e.g. Redmi Note 10 Pro or POCO F3) For new flagships (Xiaomi 14 Ultra, Black Shark 6) it is better to contact the official service, since non-original plumes may not support all functions (for example, 120 Hz in the display or the mainframe). 8K-camera-wise).
⚠️ Note: Some services may insist on replacing the entire display module instead of the plume, citing "unreliability of repair." In fact, if the plume is damaged in only one place (for example, near the connector), it can be successfully replaced. Ask for a free diagnosis before agreeing on the work!
Step-by-step: how to replace the plume yourself (for experienced users)
If you decide to change the plume with your own hands, you will need:
- 🔨 Setting screwdrivers (T2, T3, T4, Y00).
- 🧲 Screen suction cup.
- 🔥 Hair dryer or glue heating station.
- 📱 New plume (only order proven models on AliExpress or in specialty stores).
Algorithm of action:
- Turn off the phone and remove it. SIM-map.
- Heat the screen edge with a hair dryer (~60°C) for 2-3 minutes.
- Carefully suction the display and remove it (do not pull too much - the plume is still connected!).
- Unscrew the screws that fix the metal plate above the plume.
- Disconnect the old plume and connect the new one (observe polarity!).
- Put the phone back together and check its performance.
Lack of dust on the plume contacts|The tight fit of the connector to the board|Sensor performance (touch test)|No gaps between the screen and the body-->
If the screen doesn’t work after replacement or artifacts appear, check:
- Correct connection of the plume (sometimes the connector is not fully inserted).
- Integrity of contacts on the motherboard (in case of damage, soldering will be required).
- Quality of the new plume (the defective parts are found even in verified sellers).
What if the phone does not turn on after replacing the plume?
How much does it cost to repair the plume in the regions of Russia?
Xiaomi plume replacement prices are highly city-specific, with repairs costing 20 to 30 percent more in Moscow and St. Petersburg than in the regions, but there is more competition among workshops, so you can find bargains.
| Town | Cost of work (₽) | The cost of the plume (₽) | Average check (₽) |
|---|---|---|---|
| Moscow | 1 500–2 500 | 500–2 000 | 2 000–4 500 |
| St. Petersburg | 1 300–2 200 | 400–1 800 | 1 700–4 000 |
| ekaterinburg | 1 000–1 800 | 300–1 500 | 1 300–3 300 |
| Novosibirsk | 900–1 600 | 300–1 400 | 1 200–3 000 |
| Kazan/Krasnodar | 800–1 500 | 250–1 200 | 1 050–2 700 |
In smaller cities (population up to 500,000), prices can be lower by 10-15%, but it is harder to find a wizard who works with new Xiaomi models. If you do not have specialized services in your city, consider sending your phone to Moscow or St. Petersburg by mail (many workshops offer such a service with free diagnostics).
💡
In the regions, it is cheaper to repair budget models (Redmi 10/11/12, POCO M4/M5), since the plumes for them are unified and inexpensive.
Frequent mistakes in plume repair and how to avoid them
Even experienced craftsmen sometimes make mistakes that lead to repeated failures, and here are the most common ones:
- 🔌 Misconnection of the plume: If you mix sides or not press the connector, the screen may not work or display artifacts. Always check the marking on the plume (usually there are marks). TOP or BOTTOM).
- 🔥 Overheating during soldering: In models with OLED-screens (e.g. Xiaomi) 13T) The plume is soldered to the display, and if you solder it sloppy, you can damage the matrix.
- 🧹 Dust: If debris gets under the plume, the contacts will oxidize over time, and the problem will return.
- 🛠️ Use of non-original plumes: Cheap Chinese counterparts may not support all features (e.g., the same as the Chinese version, HDR in a camera or 120 Hz in a display).
To avoid these problems:
- Before repairing, check out your model’s disassembly on YouTube (JerryRigEverything or Repair Universe channels shoot detailed guides).
- Use an antistatic bracelet to avoid damaging the board with static electricity.
- If the plume is soldered, it is better to contact the service - for soldering you need experience and special equipment.
Should I repair the plume or should I buy a new phone?
This is a question that is relevant for owners of older Xiaomi models (such as the Redmi Note 8 Pro or POCO F1), where the cost of repair can reach 30-50% of the price of a new phone.
| Criteria | Repair | Buy a new one |
|---|---|---|
| Cost of repair | Less than 30% of the price of a new phone | More than 50% of the price of a new phone |
| Age of model | Less than 2 years | More than 3 years |
| Battery status | Capacity over 80% | Capacity less than 70% |
| Availability of spare parts | The plume is easy to find on sale | Spare parts scarce or expensive |
Example:
- If you have a Redmi Note 11 Pro+ (2022), and replacing the display plume costs 1,800 ₽, And the new phone costs $15,000. ₽ — repair.
- If you POCO F1 (2018), and the camera plume repair costs 2,500 ₽ at the price of a new smartphone from 10 000 ₽ — better consider the upgrade.
Also consider the moral wear and tear: if your phone doesn’t support modern standards (like 5G or Wi-Fi 6), it might make sense to invest in a new model.
💡
For Xiaomi flagships (series) 12/13/14) repair of the plume is almost always justified - even at the cost 3 000–4 000 ₽, The phones themselves are expensive and are designed to 4–5 years.