Replacement of glass on Xiaomi Redmi 9A: prices 2026, where cheaper and how not to run into fraud

Broken glass on Xiaomi Redmi 9A is one of the most common problems among owners of this budget smartphone. Even a minor crack can eventually turn into a web of faults that interfere with the use of the screen, and sharp edges – hurt your fingers. But how much does it cost to change the glass, and where is it better to do it: in official service, a private workshop or try it yourself?

In this article, we will look at the current prices for glass replacement for the Redmi 9A in 2026, compare the cost of original and analog parts, and tell you what pitfalls can be expected during repairs. You will learn why some services can vary the price by 2-3 times, how to check the quality of installed glass and what to do if after replacement there are problems with the sensor.

Spoiler: Cheap repairs don't always mean profitable. Sometimes saving on parts or a handyman turns into a second visit to the service after a month, but you don't have to pay too much for the brand either, because we'll tell you how to balance price and quality.

How much does it cost to replace glass on Xiaomi Redmi 9A in 2026: a comparison of prices

The cost of replacing glass depends on three key factors: the type of spare part (original or analogue), the region (Moscow, regions, other cities), and the status of the service center (official partner of Xiaomi or a private workshop).

⚠️ Note: Prices in the table are indicated without taking into account diagnostics (in some services it is paid - 300-500). ₽) If you need to change the glass in 1-2 hours, the cost can increase by 20-30%, and often the price does not include protective film or glass (tempered) - they have to be purchased separately (from 200) ₽).

Why is there such a price gap? Official Xiaomi services only use original parts with a warranty, but also work there is more expensive. Private workshops save on rent and staff, so they can offer similar quality cheaper. However, it is important to check reviews here - some "masters" manage to put glass defects or poorly paste them, which causes problems with the sensor or detachment.

Previous Previous post: What Glass to Choose for Redmi 9A

The main question when replacing glass is to take an original spare part or analogue. The difference in price can reach 2-3 thousand rubles, but the overpayment is not always justified.

• 🔹 The original glass (OEM): ✅ Perfect for size and sensitivity of the sensor. ✅ Warranty from the service center (usually 3-6 months). ✅ Minimal risk of detachment or the appearance of a “web” over time. ❌ Price 2-3 times higher than analogues. ❌ In small towns, it may not be available (you have to wait 1-2 weeks).
• 🔹 Analog glass (quality A)+): ✅ Prices 30-50% lower than the original. ✅ It looks almost no different from OEM. ✅ Quick replacement (usually available). ❌ May be less sensitive to touch (especially around the edges). ❌ Risk of detachment after 6-12 months with active use.
• 🔹 Analog glass (quality) B/C): ✅ The most budgetary option (from 500 ₽). ❌ Low strength - can crack from a light impact. ❌ Poor sensor sensitivity (you have to press harder). ❌ Often flakes off through 1–2 month.

A critical nuance for Redmi 9A: 80 percent of the time, when you change glass, you have to turn off the battery plume so you don't damage it when you heat it up. Some of the "masters" ignore this rule, which can cause the battery to swell or run out quickly. ₽ — This is a reason to be wary: most likely, they use a cheap analogue and do not comply with the technology.

💡

Before changing the glass, check to see if the warranty on the phone has expired. If the Redmi 9A is still warranty and the glass has broken because of you (for example, dropped), the official service may refuse free repairs, but some centers are willing to meet and offer discounts on parts.

Where to change glass cheaper: TOP-5 options

The choice of a repair site depends not only on price, but also on warranties, timing and reputation, and we analyzed user reviews and ranked options from the most reliable (but expensive) to the budget (but risky).

1. Official Xiaomi Service Center ✅ 6 months warranty, original parts. ✅ Professional equipment (infrared bonding stations). ❌ Expensive (from 3,500) ₽). ❌ Long-term repairs (2-5 days).
2. Xiaomi Certified Partners (listed at Mi.com) ✅ Prices 10-15% lower than in the official service. ✅ 3-6 month warranty. ❌ Not everyone uses original glass (check before repair).
3. Private workshops with good reviews (for example, RepairTechno, FixPrice") ✅ Price from 1,500 ₽ (A-like+). ✅ Quick repairs (1–2 hours). ❌ The risk of running into an unscrupulous master (check reviews on Yandex.Maps).
4. Self-sustaining replacement ✅ Minimum cost (from 800) ₽ glass-glass + 200 ₽ glue). ❌ Requires skills (need to gently disconnect the plumes, warm the screen with a hairdryer). ❌ Risk of damaging the matrix or battery.
5. Mobile masters (home visits) ✅ Convenient (no need to go to the service). ✅ The price is comparable to private workshops. ❌ There is no guarantee for work (only for spare parts). ❌ Low quality risk (the master can use cheap glue).

⚠️ If you are offered to replace the glass with Redmi 9A $1.00 ₽ Or cheaper, it's probably a fraud, at best, they'll put in poor quality glass, at worst, they'll use a used part, or they'll change nothing at all, just stick a film. Always demand a check for parts and a warranty card.

Check if the original glass will be installed|Ask for a work and spare part guarantee|Check reviews about the workshop on independent sites (Yandex, Google)|Find out if the diagnosis is included in the price or paid separately|If the smartphone is warranty – to clarify whether it will fly off after repair-->

Step-by-step: how to change the glass on Redmi 9A yourself

If you decide to save and replace the glass with your own hands, you will need:

• 🔧 Set of screwdrivers (cross, flat, tweezers).
• 🔥 Hair dryer (building or powerful household) for softening glue.
• 🧴 Special glue for screens (e.g, B-7000 or LOCA).
• 📱 New glass + touchscreen (better to take with a glue base).
• 🧲 Suction cups for glass removal.

Step 1: Preparing the phone

Turn off Redmi. 9A, extract SIM-It's not necessary to disconnect the battery, but if you're a beginner, it's best to turn off the battery plume to avoid short circuits when you heat it up:

1. Remove the back cover (it is on the latches, put a plastic spatula).
2. Unscrew the screws holding the metal plate over the battery.
3. Carefully disconnect the battery plume (don't pull the wires!).

Step 2: Removing broken glass

Heat the screen with a hair dryer (60-80°C) for 2-3 minutes to soften the glue. Then, with suction cups and a plastic blade, gently tuck the glass in. Don't push hard, there's a matrix under the glass that's easy to damage. If the glass doesn't lend itself, warm up again.

Step 3: Installation of new glass

Clean the matrix of glue residues (you can use isopropyl alcohol). Apply the new glue with a thin layer (if the glass is without adhesive base) and gently attach the spare part, aligning at the edges. For reliability, place the phone under the press (for example, between two heavy books) for 1-2 hours.

Step 4: Checking the performance

Connect the battery, turn on the phone and check:

• ☑️ Sensor sensitivity (especially around the edges).
• ☑️ Absence of air bubbles under glass.
• ☑️ Operating capacity of the speaker (sometimes when replacing glass, the plume departs).

💡

If the glass is replaced and it moves around the edges or if it gets rainbow, it's a sign of bad slurrying, so you need to reheat the screen and reglue the glass, otherwise it will get dust and moisture.

Frequent problems after glass replacement and how to avoid them

Even if the repairs are successful, after a while, you may get some unpleasant surprises, and here are the most common problems and ways to prevent them:

⚠️ Note: If you have replaced the Redmi glass 9A It's not charging or it's running fast, it's probably the battery plume that's damaged by the master, and it's a guarantee -- demand free repairs or refunds. Don't accept offers like, "Let's change the battery at your expense," which is a sign of bad faith.

Should I change the glass to a Redmi 9A or should I buy a new phone?

Xiaomi Redmi 9A is a budget smartphone, and sometimes replacing glass can cost up to 50% of its current market price (a new device in 2026 costs about 7-9 thousand rubles).

• ✅ Glass replacement: 🔹 Keep all data (no need to transfer files). 🔹 Cheaper if the phone is in good condition (except for the screen). 🔹 Environmentally friendly (do not increase the amount of electronic waste).
• ❌ Cons: 🔹 Risk of re-repair if the master poorly glues the glass. 🔹 Possible problems with the sensor or battery after replacement.
• ✅ Buying a new phone: 🔹 1–2 year warranty for the entire device. 🔹 Modern models (e.g. Redmi) 12C or POCO C50) have better characteristics. 🔹 No risk of "joints" after repair.
• ❌ Cons: 🔹 You will have to spend 8-12 thousand rubles. 🔹 You need to transfer data and reset the phone.

When to change the glass:

• 📱 The phone is in perfect condition (except for the screen).
• 💰 Budget is limited (no possibility to buy a new smartphone).
• 🔋 The battery holds the charge well (more than 80% of the original capacity).

When is the best time to buy a new phone:

• 🔋 The battery is tired (it has a charge of less than 60%).
• 🛠️ There are other problems (not working speaker, camera, buttons).
• 💸 The difference between repairing and buying a new phone is less than 3,000 ₽.

💡

If you are buying a new phone, don’t rush to throw away the old Redmi. 9A. It can be sold for spare parts (matrix, fee, camera) for 1000-2000 ₽ or to be used as a backup machine.

FAQ: Answers to Frequent Questions About Replacing Glass with Redmi 9A