Replacement of glass on Xiaomi Redmi 8T: prices 2026, where better to repair and how not to overpay

Why does the Redmi 8T break and when should it be changed?

Xiaomi Redmi 8T glass is one of the most vulnerable parts of the smartphone. Even with careful use of cracks, chips or a complete tear can occur from a fall from a height of 50 cm, hitting a hard surface or pressure in your pocket (for example, if you sit on your phone), especially at risk owners who do not use protective glasses or cases with reinforced sides.

But not every crack needs to be replaced immediately. For example, a web at the corner of the screen that doesn't interfere with the sensor can wait, but if the glass is broken so that the fragments cling to the finger or the display begins to "glue" (spontaneous presses, idle zones), repair can not be delayed, this can damage the matrix or injury.

Another critical case is depressurization of the screen, where if there is moisture or condensation under the glass (as seen as blurred spots), it means that the adhesive connection is broken, and in such a situation, the replacement of the glass must be urgent, otherwise the plumes will oxidize, and repair will cost many times more.

How much does it cost to replace glass on the Redmi 8T in 2026: a comparison of prices

The cost of repairs depends on three key factors: the type of glass, the location of the repair and the complexity of the work. Redmi 8T is a budget model, so the price of parts for it is lower than for flagships Xiaomi.

In official Xiaomi service centers (if the phone is still warranty), glass replacements may be refused separately, only together with the display, due to OGS (One Glass Solution) technology, where the glass and matrix are glued together, and informal services often offer separate replacements, which is cheaper.

Prices are relevant for Moscow and the regions in June 2026, and in small cities repairs can be 10-20% cheaper, but the risk of running into poor-quality parts is higher. ₽, But they're thinner than the original ones and they get scratched faster.

Previous Previous post: What Glass to Choose for Redmi 8T

When you replace the glass, you will be offered a choice of original (from Xiaomi), OEM (made in the same factory, but without a brand), or analogue (cheap copy), the difference is not only in price, but also in quality.

• 🔹 Original glass: full compliance with factory parameters, perfect sensor sensitivity, but the price is from 2 000 ₽.
• 🔹 OEM-Glass: almost like the original, but without the Xiaomi logo. $1,200-1,800 ₽, It is suitable for 90% of users.
• 🔹 Analogue (Chinese): Cheap (500–1,000) ₽), but often thinner, worse light transmits, may detach in a month.
• 🔹 Reinforced glass: options with protective coating (eg Gorilla Glass), but for Redmi 8T This is rare – usually set standard.

If you are looking for a non-original glass, be sure to check:

1. The thickness should be 0.55-0.7 mm (like the original).
2. Oleophobic coating – water droplets should roll, not spread.
3. Sensor sensitivity – Test after installation (sometimes calibration is required).

💡

Before changing the glass, ask the workshop to show the spare part in the package. The original or quality OEM should have a hologram, and on the analogue - only a sticker with an article.

Self-replacement of glass: step-by-step instructions and risks

You can replace the glass with the Redmi 8T yourself, but it takes patience and tools. The main challenge is to unplug the broken glass without damaging the display plumes. If you've never taken your smartphones apart, you'd better not take the risk.

What you need:

• 🔧 New glass (better) OEM) — 1 000–1 500 ₽.
• 🔧 Clay. B-7000 or LOCA — 200–400 ₽.
• 🔧 A hair dryer (for softening the glue) or an infrared station.
• 🔧 Plastic mediators, suckers, screwdrivers.

Buy glass and glue in advance|Remove the battery (risk of short circuit)|Prepare the workplace (cleanliness, good lighting)|Backup of data (in case of error)-->

Step-by-step process:

1. Turn off the phone and remove the back cover (you’ll have to disconnect the battery!).
2. Heat the screen edge with a dryer (60–80°C) to soften the glue.
3. Carefully tuck the glass with a plastic mediator, starting at the corner.
4. Remove the glue residue from the display frame (isopropyl alcohol can be used).
5. Apply a new glue to the frame, apply the glass and fix with strubs for 2-3 hours.

⚠️ Attention: If the display plume is damaged when the glass is unplugged, repairs will cost 2-3 times more. Without experience, it is better not to take risks - Redmi 8T has fragile connectors!

Where is it cheaper to change glass: TOP-5 savings

Glass replacement prices can vary by 2-3 times depending on the location, and here is where to look for bargains:

• 📍 Local services (not networks): often 20–30% cheaper, but check reviews.
• 📍 Services at electronics stores (for example, "Svyaznoy", "M. Video"): sometimes give discounts when buying a case.
• 📍 Online Part Ordering + Master on departure: you can save on the markup of the service.
• 📍 Group discounts: some workshops give a discount if you bring a friend.
• 📍 Promotions: Watch out for promotions in services (e.g., “glass replacement” + gift-film»).

The most budget-friendly option is to replace yourself, but only if you are confident in your skills, otherwise it is cheaper to turn to a small workshop, where the price for the work starts from 800. ₽ (spare-less).

⚠️ Note: Some services may impose “comprehensive repairs” (e.g. glass replacement) + If the phone was working properly to the crack, it's not necessary, it's a markup trick.

Frequent mistakes when replacing glass and how to avoid them

Even in service centers, sometimes mistakes are made that can be costly, and here are the most common ones:

• 🚫 Use of cheap glue → glass will fall off in a week.
• 🚫 Overheating when unstick → will damage the matrix or plume.
• 🚫 Poor frame cleaning → The dust under the glass will be visible in bright light.
• 🚫 Incorrect calibration of the sensor → The screen will "skip" the presses.

To avoid problems:

1. Check the workshop for negative reviews (especially Redmi 8T) before repairs.
2. Require a warranty of at least 3 months – this is enough to detect defects.
3. After repair, test the sensor with special applications (for example, Touch Screen Test).

💡

If the screen becomes less bright or there are severances after changing the glass, this is a sign of a poor matrix or poor build.

FAQ: Answers to popular questions about replacing glass with Redmi 8T