How much to change the glass on Xiaomi Redmi 5 Plus: a full analysis of prices

A broken smartphone screen is always a nasty surprise that can unsettle any owner. When it comes to the popular Xiaomi Redmi 5 Plus, many users are faced with the dilemma of whether to carry the device into service or try to save money by buying parts themselves. The cost of repair can vary depending on a variety of factors, ranging from the quality of components to the region where you are located.

In this article, we will take a closer look at what the final price of a display recovery is, and why a cheap part can cost more in the long run, and learn about the differences between replacing only glass and replacing a module completely, and get up-to-date data on the cost of work in 2026.

The Redmi 5 Plus (also known as the Redmi Note 5 in the global version) is equipped with a new version. IPS-The screen is 5.99 inches, making it more technically difficult to replace than today’s screens. AMOLED-Understanding these nuances will help you make an informed decision and avoid unnecessary costs.

Factors Affecting the Cost of Repair

The first thing to consider when looking for a wizard or service is the type of part used, the market is full of offers where the price can vary by two or three times, the main criterion of difference is the quality of the matrix and glass, as well as the presence of a frame.

Many service centers offer only external glass (touchscreen glass) replacement, leaving the native matrix, which is only possible if the image is displayed without distortion and the sensor responds correctly, but this procedure requires special equipment for separation of glue, which is not available in every workshop and significantly affects the final estimate.

A more common and often more reliable option is a complete replacement of the display module, in which case you get a new glass, touchscreen and matrix assembled, the price here depends on the component manufacturer: the original from Xiaomi, a high-quality copy (Hard OLED or quality IPS), or a budget counterpart with the worst color reproduction.

  • πŸ“± Part Type: Original costs significantly more than copies, but guarantees perfect color reproduction and fingerprint scanner performance.
  • πŸ› οΈ Complexity of work: Replacing the module in the assembly takes less time than gluing the glass, but requires accuracy when disassembling the body.
  • πŸ“ Geography of service: In large cities, prices for masters may be higher due to the cost of rent and competition.
  • πŸ“¦ Frame availability: Modules with a frame installed are more expensive, but simplify the assembly process and eliminate glue problems.

⚠️ Note: If you are offered glass replacement at a suspiciously low price, check if the original glue is used. B-7000 or T-7000. Cheap analogues can quickly dry out, and the screen will peel off again in a couple of months.

The cost is also affected by urgency: if you're willing to wait a few days for a spare part to arrive, it can save you up to 20 percent of the amount.

Price comparison: original vs. analogues

The cost difference between the original parts and their counterparts can be significant. For the Redmi 5 Plus, which is no longer the flagship, finding originals becomes more difficult, sometimes artificially inflating the prices of inventory balances.

Original modules are marked with appropriate logos and have a perfect fit of all elements. Copies, even high-quality ones, can have slightly different shades of white or less bright backlight. Budget options often sin with a poor viewing angle and a "floating" touchscreen around the edges.

The following table shows the approximate price range in the market for spare parts and repair services in the current period, prices are quoted in rubles and may vary.

Type of spare partCost of the part (ruble)Cost of work (ruble)Guarantee
Original (OEM)2500 - 32001000 - 15006-12 months.
High quality copy (AAA+)1500 - 2000800 - 12003-6 months.
Budget copy800 - 1200600 - 90014-30 days
Replacement of glass only (separation)500 - 800 (materials)1500 - 200030-90 days

As you can see from the data, the savings on a budget copy can be up to 60 percent of the cost of the original repair, but the resource of such screens is often unpredictable, and sometimes a cheap module fails after six months of active use.

πŸ“Š What repair option you will choose for your smartphone?
Original in the service
Copy of AAA+ from a privateer
Budget copy and itself
Buying a new phone

The cost of self-replacement of glass

For those of you who are friends with a soldering iron and thin plumes, self-repairing seems like a great way to save money. You only pay for the parts and tools if they are not available, but there are hidden risks.

First of all, you'll need a set of tools: screwdrivers, mediators, a sucker and perhaps a dryer to soften the glue. If you order a frameless module, you'll need to carefully carry all the small details (the speaker, the button plumes) from the old case, which requires jewelry precision.

Also, you need to consider the cost of glue. For Xiaomi Redmi 5 Plus, it is recommended to use special adhesive tapes or liquid glue. Incorrect application can cause the screen to bulge or fit poorly to the body, violating the tightness.

  • πŸ”§ Tools: Basic set costs from 500 rubles, professional - from 2000 rubles.
  • πŸ’§ Expenditure: Clay B-7000 near 200-300 A sleeve for a tube that will be enough for several repairs.
  • ⏱️ Time: The first replacement can take 1 to 3 hours, including learning instructions and video.

The main risk of self-repair is the possibility of damaging other components of the smartphone, such as the main camera plume or battery, in which case the savings on the screen will turn into expensive repairs of the entire board.

⚠️ Warning: Before any work begins, be sure to turn off the battery! Even short-term closure of the contacts of the battery connector with a metal tool can cause the power controller to fail.

β˜‘οΈ Preparation for self-replacement

Done: 0 / 4

Hidden costs during repairs in the service

When you go to a service center, you pay not only for the work of the master, but also for the guarantee and peace of mind, but the final check may show items that you were not warned about initially. Always specify the full cost before you start work.

And you often find that when you're diagnosed, it's not just the screen that's broken, but the back cover or the frame, and the wizards might suggest that you replace them right away, arguing that when you build the old case, it might crack completely, and that increases the check amount.

Another thing is the cost of a diagnosis: many services claim a free check, but only if you agree to a repair, if you decide to refuse, you may be charged for your engineer's time, and some centers charge extra for urgency or weekend work.

What is included in the screen guarantee?
The warranty usually covers only the production defects of the spare part itself: the appearance of stripes, broken areas of the touchscreen, detachment of layers. Mechanical damage (new impact, fall, water intake) is not covered by the warranty, even if they occurred the day after the repair.

Logistics is also worth considering. If the specialized service is far away, the cost of transporting or couriering the device is also part of the cost of repairs. In smaller cities, the choice may be limited, which dictates the prices of local craftsmen.

Where to buy spare parts: risks and reliability

Finding a reliable supplier is half the success of a repair. There are hundreds of offers on popular marketplaces, but how do you avoid getting married? First of all, look at the seller's rating and the number of reviews with photos.

Chinese sites offer the lowest prices, but delivery can take a month and return defective goods will cost more than the part itself. Local radio parts stores provide an opportunity to check the goods before buying, which significantly reduces the risk.

When buying, pay attention to the packaging. Original modules often come in sealed packages with holograms and QR-Cheap copies can be just wrapped in a bubble film. Check the integrity of the plumes: they must not have cracks or soldering marks.

  • πŸ“¦ Packaging: The presence of a protective film on the matrix and a plug on the connector is a good sign.
  • πŸ” Visual inspection: Turn on the screen (if possible) or inspect the matrix in the light for broken pixels.
  • πŸ“ Documents: Demand a check or invoice, even when buying from a private person, this is your insurance.

The difference of 200-300 rubles is not worth it to take the phone apart again in a week. The optimal choice for the Redmi 5 Plus is the module of the category "Original Copy" or "High Quality", which balances between price and image quality.

FAQ: Frequently Asked Questions

Can only glass be replaced if the matrix is intact?
Technically, it is possible, but it requires expensive equipment to separate layers (separator and laminator) and it is almost impossible to do it at home, there is a high risk of crushing the matrix, and in a service such a service can cost almost like a new module.
Will the fingerprint scanner work after the screen is replaced?
Yes, the fingerprint scanner in Redmi 5 Plus is located on the back cover and is not directly connected to the display module. However, if you disassemble it carelessly, you can damage its plume, so be careful.
How to check the screen before the phone is fully assembled?
Connect the new display plume to the board without gluing it. Turn on your phone and check for the touchscreen, broken pixels, and color gamut. Use the code ##6484### to log in to the engineering menu and run tests.
How long does the glue dry after replacement?
It takes 12 to 24 hours for B-7000 glue or analogues to completely solidify, and in the first hours after repair, it is not recommended to actively use the phone, put it under loads or wear it in a tight-fitting case so that the screen does not move away.
Does it make sense to change the screen to Redmi 5 Plus in 2026?
If you're comfortable with the phone in terms of speed and memory, replacing the screen will extend its life by 1-2 years, and given the low cost of spare parts for this model, repairing it is economically viable compared to buying a new budgetary.

πŸ’‘

Repair Redmi 5 Plus is economically feasible: the cost of a quality module with work rarely exceeds 40-50% of the market price of a used device in working condition.

To sum up, replacing the glass with Xiaomi Redmi 5 Plus is an affordable procedure, but requires careful consideration of the details.