Broken camera glass on Xiaomi Redmi is a problem that many smartphone owners of this line face. Even a slight fall or impact can lead to cracks in the protective glass of the camera module, which spoils the appearance of the gadget and sometimes interferes with the normal operation of the camera.
In this article, we will analyze the current prices for replacing camera glass for popular Redmi models (from Redmi Note 12 Pro+ to Redmi 9A), compare the cost of repairs in service centers and private craftsmen, and tell you what pitfalls await when you replace yourself. You will learn why in some cases it is cheaper to change the entire camera module, not only glass, and how not to run into poor-quality spare parts.
Why is the camera glass on Xiaomi Redmi breaking?
The camera glass on Xiaomi Redmi smartphones is one of the most vulnerable, and unlike the display, which is usually protected by tempered glass or film, the camera glass is often left without additional protection, the main reasons for its damage:
- 📱 Falling to a hard surface – even from a height of 30-50 cm is enough to cause cracks to appear.
- 👖 Contact with keys or coins in your pocket – many users carry their phone with metal objects.
- 🔧 Sloppy repairs – when replacing a battery or display, the wizard can accidentally damage the glass.
- 🌡️ Temperature changes – if the phone was lying in the cold for a long time, and then got into a warm room, the glass can burst.
Models with a protruding camera module, such as the Redmi Note 11 Pro+ or Redmi K50, are particularly affected; their cameras protrude 1-2 mm above the body, which increases the risk of damage when falling; at the same time, budget models like the Redmi 10A have almost full-fat camera glass with the body, so it breaks less often.
How much does it cost to replace the camera glass in the service center?
The cost of replacing camera glass in official and informal service centers depends on the model of the smartphone, region and type of spare part. Below is a table with the current prices for 2026 for popular Xiaomi Redmi models (indicated average prices in Russia, including work and parts):
| Xiaomi Redmi Model | Cost of glass replacement (₽) | Cost of replacing the entire camera module (₽) | Notes |
|---|---|---|---|
| Redmi Note 12 Pro+ 5G | 1 800 – 2 500 | 4 500 – 6 000 | Glass often comes complete with a camera frame |
| Redmi Note 11 Pro+ 5G | 1 500 – 2 200 | 3 800 – 5 000 | Often breaks when falling on asphalt |
| Redmi 10C / 10A | 800 – 1 400 | 2 500 – 3 500 | Cheap parts, but it's hard to find the original |
| Redmi 9T / 9A | 700 – 1 200 | 2 000 – 3 000 | Low repair price, but often offer unoriginal glass |
| Redmi K50 / K50 Pro | 2 000 – 3 000 | 5 500 – 7 500 | Expensive parts due to premium segment |
It is important to note that official Xiaomi service centers (such as Mi Service) often refuse to change only the glass, offering to replace the entire camera module, because when the glass is dismantled, the risk of damage to the camera itself is high, so the price can be higher by 30-50% in authorized services.
⚠️ Note: Some services use cheap Chinese glass that turns yellow after 2-3 months or quickly scratches. Always ask for a spare part before installation!
Replacing Camera Glass on Your Own: Is It Worth Risk?
If you want to save money, you can try replacing the glass on your own, and on average, the cost of the glass itself on AliExpress or in Chinese parts stores ranges from 200 to 800 rubles depending on the model.
- 🔧 The challenge of dismantling is that the glass is glued to the camera module, and to remove it, you have to heat it carefully and tamper with it.
- 🛠️ Necessary tools - will be required: hair dryer (or thermal air station), plastic blades, tweezers, glue B-7000 or UV-glue.
- ⚠️ Risk of losing tightness - if the glass is installed incorrectly, dust or moisture can get inside the module, which will lead to fogging of the camera.
- 📸 Focusing problems – if the glass is set curved, the camera may start to “wash” or focus poorly.
According to user reviews, self-replacement is justified only for budget models like Redmi 9A or Redmi 10C, where the cost of work in the service is comparable to the price of a new phone. For flagships (Redmi K50 Pro, Note 12 Pro+) it is better to turn to professionals - the error can cost more.
New glass (check compatibility with the model)
Dryer or thermo-air station (power 300-500W)
Plastic blades and tweezers
Clay. B-7000 or UV-fixation
Alcohol and wipes for surface cleaning-->
Where to change glass cheaper: comparison of options
To save money, many users are looking for alternatives to official service centers.
| Repair option | Cost (₽) | Pluses | Cons |
|---|---|---|---|
| Official Mi Service Service Service | 1 500 – 6 000 | 6-12 months warranty, original parts | Expensive, often imposed replacement of the entire module |
| Informal service | 800 – 3 500 | Cheaper, faster, only glass can be replaced | Risk of poor quality spare parts, no guarantee |
| Private Master (Avito, Yula) | 600 – 2 500 | The lowest price, you can negotiate a discount | No guarantee, high risk of marriage |
| Self-repair | 200-800 (part only) | Maximum savings | It's hard to get the phone damaged. |
The most budget option is to order glass on AliExpress (price from 150 rubles for old models) and try to replace yourself. However, as practice shows, 60% of users who take up repairs for the first time, have problems: from unplugged glass to a completely broken camera. If you are not sure of your skills, it is better to pay 500-1000 rubles and give the phone to a trusted service.
💡
Before you take your phone for repair, take a picture of the cracks on the camera glass from different angles, which will help to avoid disputes with the master if after repair there are new defects.
What parts to choose: original vs. analog
When you replace the camera glass, you will face a choice: buy an original spare part or a similar one, and figure out what the difference is and what is better for your Xiaomi Redmi model.
The original glass is a part made by the same supplier as the factory assembly.
- 🔹 Perfect match in size and shape.
- 🔹 No problems with focus and quality of shooting.
- 🔹 Longer serves without scratches and clouds.
Minus one - the price of the original glass can exceed the cost of the analogue in 3-5 times. For example, for the Redmi Note 11 Pro + original glass costs about 1,200 rubles, while the Chinese counterpart can be found for 300-400 rubles.
Analogues (replicas) are cheaper, but have a number of disadvantages:
- 🔸 Often thinner than the original, which makes the camera less protective.
- 🔸 It may turn yellow over time (especially cheap options).
- 🔸 Sometimes the quality of the photo is deteriorating due to distortion of light.
If you're looking for a glass analog, look at the reviews about the vendor and the glass material, and the best options are glass labeled "Tempered Glass" or "Optical Grade," and avoid plastic glass, which will quickly scratch and turbid.
What to do if the camera is not working well after the replacement
Sometimes, after replacing the camera glass, users face problems: the camera does not focus, blurred spots appear, or autofocus works with a delay.
- 🔍 Glass is curved. → You need to re-glue, aligning in the center of the module.
- 💧 Dust or moisture has fallen. → Disassemble the module, clean with alcohol and seal seal tightly.
- 📏 Used low-quality glue → Replace the glue with B-7000 or UV-glue.
- 🔧 Camera plume damaged. → Diagnostics are required in the service.
If the camera stopped working completely (black screen, error "failed to connect to the camera"), most likely, when changing the glass was damaged plume or contacts module, in this case, you will need to replace the entire camera module, and the cost of repair will increase by 2-3 times.
⚠️ Warning: If the camera becomes less photographic in the dark after the glass is replaced or color distortions appear, it is likely that a glass with low light transmission will be installed.
How to check the quality of the glass installation?
Xiaomi Redmi models, which most often break the camera glass
Not all Xiaomi Redmi smartphones are equally susceptible to camera glass damage, and analysis of service center calls shows that the following models are most likely to break:
- Redmi Note 11 Pro+ 5G is a protruding camera module with brittle glass.
- Redmi Note 10 Pro is a thin glass that cracks even with light impacts.
- The Redmi K50/K50 Pro is a heavy phone that often drops upwards.
- Redmi 9T is a budget model with weak camera protection.
- Redmi Note 12 Pro+ 5G is a large glass that is easy to break when falling.
If you have one of these models, it is recommended to purchase a protective case with reinforced sides or a film on the camera in advance, which will reduce the risk of damage if you fall by 70-80%.
💡
The camera glass on Xiaomi Redmi breaks more often than the screen because it is thinner and has no additional protection. Even a small blow can lead to cracks, and repairs will cost 1,000-6,000 rubles depending on the model.