Xiaomi Redmi 5 is one of the most popular budget smartphones of the brand, released in 2017. Despite its age, many users still actively use this model. However, over time, one of the most vulnerable points of the device — charging socket (microUSB connector) — begins to fail. Poor contact, slow charging or no reaction to the cable are typical symptoms of the problem. In this article, we will discuss how much it costs to replace the charging socket with Redmi 5 in 2026, where it is better to apply for repairs and whether you can save by doing the work yourself.
The cost of repairs depends on several factors: region, type of service center, originality of parts and complexity of work. For example, in official Xiaomi services, the cost may differ from the offers of small workshops. It is also important to consider that a faulty socket is not only discomfort, but also the risk of battery damage or even fire when using poor-quality cables.
If you notice that the phone stopped charging the first time, the cable has to move to make contact, or the device does not respond to the connection of charging — most likely, the problem is the connector. Next, we will discuss in detail everything from diagnosis to the choice of wizard and alternative ways to solve the problem.
Signs of malfunctioning charging socket in Xiaomi Redmi 5
Before you run to the service center, make sure the problem is really the connector, not the cable, power supply or software failure.
- 🔌 The phone is charged only in a certain position of the cable (you need to press or bend the plug).
- ⚡ Charging is interrupted or extremely slow (for example, 1% in 10-15 minutes).
- 📵 The device does not respond to charging connection at all (no indication, sound or vibration).
- 🔥 The connector is shattered, inside you can see bent or oxidized contacts.
- 🔄 The phone defines charging as a connected device (e.g., trying to transfer data instead of charging).
If any of these signs are present, the probability of a nest malfunction is 80-90%, but before repair it is worth checking:
- 🔋 Other cable and power supply (preferably original or certified).
- 🧹 Clean the connector from dust and debris (you can use a toothpick or compressed air).
- 🔄 Rebooting your phone – sometimes helps with software failures.
If you have a problem with this manipulation, you should think about replacing the connector, but before you take the phone to the workshop, let's figure out how much it costs and where to repair it.
The cost of replacing the charging socket in Xiaomi Redmi 5: a price comparison in 2026
Repair prices can vary significantly depending on the region and type of service. Below is the current table with average prices for Russia and CIS countries (June 2026).
| Type of service | Cost of work (₽/₴/₸) | Cost of the spare part (₽/₴/₸) | Final price (₽/₴/₸) | Guarantee |
|---|---|---|---|---|
| Official Xiaomi service | 1 200–1 800 | 800–1,200 (original) | 2 000–3 000 | 6–12 months |
| Authorized Partner of Xiaomi | 900–1 500 | 600–1000 (analogue) | 1 500–2 500 | 3–6 months |
| Small workshop | 500–1 200 | 300–700 (Chinese equivalent) | 800–1 900 | 1-3 months |
| Self-sustaining replacement | 0 (if tools are available) | 200–500 (AliExpress) | 200–500 | No. |
Important: Xiaomi’s official services may be denied repairs to the Redmi 5 due to its age (the model was discontinued in 2019), in which case you will have to contact third-party workshops.
What affects the final cost:
- 📍 In Moscow and St. Petersburg, prices are 20-30% higher than in small cities.
- 🔧 Type of connector: Original nest costs more, but will last longer.
- ⚡ Urgent: Express repair (in 1-2 hours) can cost 300-500 ₽ more.
- 🛠️ Additional Works: If the replacement is found to damage the board, the price will increase by 1,000–2,000 ₽.
💡
Check with the repairman before you get it, and check if the cost includes diagnostics, and some services offer it for free, while others charge 300-500. ₽ Even if you refuse to repair.
Where to repair: official service vs private workshop
The choice between a formal service and a small workshop depends on your priorities: reliability, price or speed.
Official Xiaomi service
Pros:
- ✅ Work and parts warranty (usually 6-12 months).
- ✅ Use original or certified parts.
- ✅ Professional equipment and experienced masters.
Cons:
- ❌ High price (30-50% more expensive than in workshops).
- ❌ Long term repair (2-5 days, sometimes longer).
- ❌ There may be a failure to repair due to the age of the model.
Authorized Partners of Xiaomi
These are services that are contracted with Xiaomi, but are not official, and prices are lower, and the warranty is usually 3-6 months, suitable for those who want to save money, but not risk quality.
Private workshops
Pros:
- ✅ Low price (can be replaced for 800-1 200) ₽).
- ✅ Quick repairs (often in 1-2 hours).
- ✅ Willingness to work with outdated models.
Cons:
- ❌ Risk of poor quality work (poor soldering, cheap spare parts).
- ❌ Short warranty (1-3 months) or no warranty.
- ❌ Possibility of damage to other components during disassembly.
💡
If you want reliability and durability, choose an official service or an authorized partner, and if price and speed are the priority, a proven workshop with good reviews will do.
How to choose a reliable workshop:
- 📌 Read reviews on Yandex.Maps, 2GIS or Google Maps.
- 🔍 Check if you have a job guarantee and spare parts.
- 💬 Ask them what they will be doing (original or similar).
- 📸 Ask for a photo of the repair process (to make sure the nest has actually been changed).
Can I replace the charging socket by myself?
If you have experience with soldering irons and small electronics, you can replace the microUSB connector with the Redmi 5 yourself, but this requires care and patience. Below is a step-by-step guide and a list of tools you need.
What you need:
- 🔧 A soldering iron with a thin sting (power 20-30 W).
- 🧲 Flush and solder (it is better to use a laundering system).
- 🔨 Plastic mediators or special blades for disassembly.
- 🔍 Loop or magnifying glass (contacts are very small!).
- 🛠️ New charging socket (you can order on AliExpress or buy from the radio store).
- 🧴 Isopropyl alcohol for board cleaning.
Turn off your phone and remove the battery.|Take a photo of the board before dismantling (in case of errors)|Check the new nest for the integrity of contacts|Prepare a workplace with good lighting-->
Step-by-step:
- Turn off the phone and remove the battery (in Redmi 5 it is removable, but soldered to the board with a plume).
What if the phone does not charge after replacement?
Risks of self-repair:
- 🔥 Damage to the fee in case of careless rationing.
- 📵 Loss of communication or other functions (if you touch adjacent components).
- 🔋 Damage to the battery when improperly removed.
⚠️ Warning: If you've never soldered chips, it's best not to take risks.A mistake can lead to a phone completely failing and more expensive repairs.
How to prolong the life of the charging nest: prevention of breakdowns
In order not to face the need to replace the connector, follow the simple rules:
- 🔌 Use high-quality cables. Cheap Chinese cords often have thin wires that damage the socket contacts.
- ⚡ Don't pull the cable on the plug. Always take it out by holding the connector body, not the wire.
- 📵 Avoid charging in motion. Vibrations and jerks accelerate wear of contacts.
- 🧹 Clean the connector regularly. Dust and debris worsen contact and can cause oxidation.
- 🔋 Don't charge your phone to the point. Constant charging reduces battery life to 100% and increases the load on the connector.
You also need to look at wireless charging, and while Redmi 5 doesn't support it out of the box, you can use adapters that attach to a microUSB connector and allow you to charge your phone to Qi standard, which will reduce the mechanical load on the socket.
💡
If you often connect your phone to your computer to transfer files, use cloud services (Mi Cloud, Google Drive) or Wi-Fi Direct. This will reduce the wear and tear of the connector.
Another useful life hack is to use a magnetic cable, which is fixed in the nest with magnets, which reduces the risk of mechanical damage from accidental jerks, but note that such cables may be less reliable in terms of charging speed.
Alternative ways to charge if the nest is broken
If the connector is out of order and the repair is delayed for some reason, you can temporarily charge the Redmi 5 in alternative ways.
- 🔌 Through OTG-If you have a cable, OTG-You can connect another smartphone or power bank with reverse charging to your phone, but this doesn't work on all models.
- ⚡ Wireless charging. As mentioned earlier, Redmi 5 sells adapters that attach to the microUSB connector and allow you to charge the phone according to the Qi standard.
- 🔋 Directly connected external battery: Some power banks have removable connectors that can be soldered directly to the phone's battery contacts (requires disassembly).
- 📵 Charging through the docking station. If you have a dock from your old phone, you can try connecting Redmi 5 via it (but this only works if the socket contacts are still partially working).
They won't replace full-fledged repairs and may be less safe. OTG It is often very slow and wireless adapters can overheat.
⚠️ Note: If you choose to use alternative charging methods, turn off the fast charging function in the settings (Settings) → Battery → Fast charging. This will reduce the risk of overheating and battery damage.
Frequent errors when replacing a charging socket and how to avoid them
Even experienced wizards sometimes make mistakes when replacing a microUSB connector. Here are the most common mistakes and ways to prevent them:
- 🔥 Overheating of the board. Long soldering can damage tracks or adjacent components. Solution: Use a soldering iron with a power of no more than 30 watts and work with short touches.
- 📵 Bad contact. If the solder is not evenly distributed, the nest will fall off or not work properly. Solution: Use flux and check the quality of the soldering of the magnifying glass.
- ⚡ Short circuit. If the socket contacts come into contact with each other, the phone may stop turning on. Solution: Multimeter no circuit after soldering.
- 🛠️ Battery plume damage, if you're not sloppy, you can break thin wires. Solution: Disconnect the plumes with a special blade, don't pull the wires.
- 🔋 Incompatible socket. Cheap alternatives may not fit in size or have other contacts. Solution: Buy a Redmi 5-labeled connector.
If the phone doesn't charge after the socket is replaced, don't be quick to blame the workshop.
- Software failure (will help reset settings).
- Damage to the power controller on the board.
- Wear the battery (if it is swelled, it also needs to be replaced).
💡
If the phone starts to run out or warm up quickly after repair, it's probably not just the nest that's the problem.