How much does it cost to change the screen Xiaomi Redmi Note 8T — full guide to prices and nuances
Broken or broken screen on Redmi Note 8T — One of the most common problems after 2-3 Even a minor crack can eventually lead to complete sensor failure, image flickering or dead pixels. In this article, we will discuss the current prices for replacing the display in the pixels. 2026 In the year, compare the cost of original and non-original modules, and also tell you where it is more profitable to repair: in the service center, from private masters or independently.
It is important to understand that Redmi Note 8T (codename willow IPS-resolution-screen 2340×1080 and frequency of renewal 60 Replacing the screen here is more difficult than on flagships with AMOLED, Because of the brittle lighting and the thin plumes, if you're planning a repair, consider that cheap ones often have problems with color reproduction and tactile response -- before you can get it done. 30% Users are returning to the service through 3-6 months.
The cost of replacing the screen in 2026: a comparison of prices
Prices for repairs vary depending on the type of display, region and status of the service center, and below are the current rates for Moscow, St. Petersburg and the regions (updated in May 2026).
| Type of display | Cost (₽) | Guarantee | Where to replace |
|---|---|---|---|
| Original Screen (Xiaomi) OEM) | 8 000 — 12 000 | 6–12 months | Official service centers, authorized partners |
| Quality analogue (A)+, Copy 1:1) | 4 500 — 7 000 | 3–6 months | Private workshops, services with a rating of 4.5+ |
| Budgetary analogue (Copy, low quality) | 2 500 — 4 000 | 1–3 months or not present | Low-profile workshops, AliExpress (self-substitution) |
| Self-substitution (purchase of module) + tool) | 3 500 — 6 000 | No (risk of damage) | AliExpress, Take, Yandex Market |
⚠️ Note: Official Xiaomi services often offer comprehensive repairs (display replacement) + Diagnostics fee) at a price of 10 000₽. This is justified if the crack has damaged the plumes or contacts, and in private workshops, it can cost between 1,500 and 2,500 to diagnose them.₽ additionally.
Prices in the regions are 10-25% lower than in Moscow, for example, in Yekaterinburg or Novosibirsk, the original screen will cost 7,000-9,000₽, a qualitative analogue - in 3,500-5,500₽. The cost also affects:
- 🔧 Urgent repair (express replacement for 1-2 hours more expensive by 20-30 hours%).
- 📦 Completement (cost may include replacement of protective glass or glue).
- 🔄 Warranty obligations (services with a 12-month guarantee take 15-20% more expensive).
Original vs analogue: what to choose for Redmi Note 8T
The main question when replacing the screen is to take the original module or save on the analogue, and let's analyze the pros and cons of each option.
Original Screen (Xiaomi) OEM)
Pros:
- 🎨 100% matching color reproduction with factory settings (Delta E) < 2).
- ⚡ Instant Sensor Response (without delays in swipes).
- 🛡️ 6-12 months guarantee in official services.
- 🔋 Lifespan – 3-5 years without loss of brightness.
Cons:
- 💰 High price (from 8,000)₽).
- ⏳ Long-term repairs (in official services up to 5-7 days).
Qualitative analogues (A)+, Copy 1:1)
Pros:
- 💵 Prices 30-50% lower than the original.
- ⏱️ Quick replacement (1–2 days).
- 📱 Good color reproduction (Delta E) ~3-5, only noticeable when compared directly).
Cons:
- 🖱️ Sensor delay up to 20-30 ms (tangible in games).
- 🌡️ Decrease in brightness by 10-15% after 1-2 years.
- 🔄 Risk of Failure (up to 5% of modules have broken pixels).
Budgetary analogues (Copy, low quality)
These screens are cheap (from 2,500)₽), but have critical flaws:
- 🎨 Blue or blurred colors (Delta E) > 10).
- ⚡ Sensor lags up to 50–100 ms (inconvenient to print).
- 💥 High risk of detachment after 3-6 months.
- 🔋 Service life - less than 1 year.
⚠️ In 2023-2026, cases where cheap analogues of the Redmi Note have become more frequent 8T Do not support Always-on Display (if it was activated through custom firmware). MIUI!
How to distinguish the original screen from a fake?
Where to Change the Screen: TOP-5 variant
The choice of service depends on the budget, the repair time and the quality requirements, and consider all options, from official centers to self-replacement.
1. Official Xiaomi Service Centers
Pros:
- ✅ 12 months guarantee for work and spare parts.
- ✅ Use only original modules.
- ✅ Diagnosis is free (if you repair them).
Cons:
- ❌ Expensive (from 8,000)₽).
- ❌ Long-term repairs (3-7 days).
- ❌ Often impose additional services (cleaning connectors, replacing glue).
Where to find: Official list on the website mi.com/ru/service.
2. Authorized Xiaomi Partners
These are private services that have a contract with Xiaomi and use original parts, prices are 10-15% lower than in official centers, and the warranty is 6-12 months.
Examples: Service Plus, TechnoDoctor, FixPrice (not to be confused with a chain of stores!).
3.Private workshops rated 4.5+
Best option for price/quality ratio.Look for workshops with:
- 📌 Reviews on Yandex.Maps or 2GIS (at least 50 reviews).
- 🔧 Photos of repair processes (this indicates transparency).
- 📄 3-month warranty.
Average price: 4,500–7,000₽ (qualitatively).
4. Self-substitution
Suitable if you have experience in electronics repair. The cost of the module is 3,500-6000₽ (on AliExpress or Beru).
What you need:
- 🛠️ Setting screwdrivers (T3, T4, cross-section).
- 🧲 Screen suction cup.
- 🔥 Hair dryer or glue heating station.
- 📏 Plastic mediators for separation of the body.
5. Replacement under insurance or guarantees
If the warranty phone (up to 1 year from the date of purchase) and the screen crashed through no fault of yours (for example, a factory defect), repairs can be free.
- 📄 Damage insurance (if issued during purchase).
- 💳 Cashback by card (some banks refund up to 10% for repairs).
1. whether the data is stored (the broken screen may not respond to touch).
2. whether the sensor is working (try to connect the mouse on the OTG).
3. whether there is damage on the board (check charging, speakers, camera).
4.Can the new module be compatible with your Redmi Note revision? 8T (check with the master).-->
Step-by-step: how to replace the screen yourself
If you decide to make a self-repair, follow this instruction: 1.5–2 The complexity of the hour: 4/5 (neatness).
Step 1: Preparation and disassembly
1. Turn off the phone and remove SIM-map + memory-card.
2. heat the screen edge with a hair dryer (temperature 60–70)°C) for 2-3 minutes to soften the glue.
3. Gently tuck the screen with a plastic mediator, starting at the bottom edge (near the charging connector).
⚠️ Warning: Do not use metal tools – they can damage battery plumes or antennas!
Step 2: Turn off the plumes
1. Unscrew 6 screws (T3) on a metal plate covering the screen plumes.
2. gently disconnect the sensor and display connectors (use a plastic shoulder blade).
3. Check if there's any damage to the flexible cables. If the plume is broken, it'll have to be replaced (+1 000–1 500₽).
Step 3: Install a new screen
1. Transfer to the new module all additional details (dynamics, LED notifications, camera).
2. Connect the plumes and fix them with a metal plate.
3. Apply a new glue (recommended) B-7000 or LOCA-glue).
Step 4: Assembly and testing
1. Press the screen and remove the excess glue.
2. Turn on the phone and check:
- 🎨 Color rendering (whether yellow/blue).
- ⚡ Sensor operation (test in Settings) → The phone. → Diagnostics → Touch test).
- 🔋 Charging and speaker operation.
⚠️ Warning: If the screen flickers or turns off spontaneously after replacement, check the density of the plumes. A frequent mistake is the improper installation of a metal plate that presses on the cables.
💡
Before gluing the screen, wipe the inner surface of the case and the new display with isopropyl alcohol (90%+). This will remove fat and dust by improving glue adhesion.
Frequent Screen Replacement Mistakes and How to Avoid Them
Even experienced craftsmen sometimes make mistakes that lead to re-repair, and here are the most common problems and ways to prevent them:
1. Damage to battery plume
Reason: Sloppy tampering with a mediator next to the battery.
How to avoid: Use a plastic tool and don't push too hard. If the plume is torn, it can be temporarily insulated kapton tape, but it's better to replace it.
2. Screen detachment after 1-2 months
Reason: Poor-quality glue or insufficient heating during installation.
How to avoid:
- Use a two-part glue (for example, LOCA + UV-hardener).
- Warm up the screen with a hair dryer after installation (60)°C, 5 minutes for better polymerization.
3.The sensor or part of the screen is not working
Cause: Bad fit of the plume or its damage.
How to avoid:
- Check the plumes before final assembly (plug the screen and test the sensor).
- Do not over-extend the cables – they should lie freely, without tension.
4. Poor color reproduction or backlighting
Reason: Incompatibility of analog screen with firmware.
How to avoid:
- Buy modules marked "For Redmi Note" 8T Willow".
- After replacing, reset the screen settings in Settings → Screen. → Color mode → Standard.
5.The phone does not turn on after replacement
Reason: Short circuit or disconnected power plume.
How to avoid:
- Check the connection of all connectors (especially batteries and power buttons).
- If the phone doesn’t respond, plug it into charging for 10-15 minutes — sometimes it helps.
💡
If the screen is working after the replacement, but the phone is warming or discharged quickly, the battery plume is likely damaged.₽).