Broken display is one of the most common problems faced by smartphone owners, and the Xiaomi Poco M3 is no exception. Falling on asphalt or accidentally hitting a hard angle often leads to a “web” of cracks in glass or, much worse, to a complete failure of the matrix. Owners immediately wonder about the cost of recovery, since it is the screen replacement that is the most demanded, but also one of the most expensive services in service centers.
The price of a new part varies greatly, depending on many factors, from the quality of the component to the pricing policy of the specific service center in your city. It is important to understand that the Poco M3 has design features that affect the complexity of disassembly and the total amount in the check. In this article, we will discuss in detail what the cost is, what types of displays exist and whether it is worth saving on buying a spare part.
Don't ignore the damage to the glass, even if the sensor is still working properly. Small fragments can eventually damage the touch scan or cut your fingers, and moisture through the cracks is guaranteed to corrosion the board and failure of the entire device. So delaying with repair is not recommended, and it is better to know the current rates in advance to plan the budget.
Factors Affecting the Final Cost of Replacement
The final price is not just a two-fold multiplication of the cost of a part, but includes logistics costs, service rent, craftsmanship, and of course the type of matrix itself. There is a clear division in the Xiaomi parts market, and the price difference between the cheapest and most expensive options can be as high as 200-300%.
The first and most important factor is the originality of the component. The original displays supplied to Xiaomi factories cost the most, but guarantee full compatibility, brightness of the picture and the correct operation of the fingerprint scanner. Copies, even high-quality ones, can have a dimmer backlight or incorrectly transmit colors, which is especially noticeable on the screen. IPS-screen.
⚠️ Note: When buying a cheap analogue, you risk getting a display with incorrect color reproduction, where the white color will go into a grayish or yellowish shade, as well as with a less responsive touch screen.
The second factor is the way to replace it. Services often offer two options: replacing only the glass (if the matrix is intact) or replacing the module assembled. Replacing the glass requires special equipment and costs less in parts, but the laboriousness of the work is high. Replacing the module assembled is faster, but the spare part itself (screen + frame + glass) costs much more.
- 🔍 Type of matrix: original, quality copy (OEM) or a cheap analogue (Refurbished).
- 🛠️ Difficulty of work: replacement of glass separately or module with a frame.
- 📍 Region and class of service: Authorized center or private workshop at home.
- 📦 Additional work: replacement of the battery or adhesive base.
The price is also affected by the presence of a bezel. The displays for the Poco M3 are often sold already pasted into the plastic frame of the case. This makes it easier to assemble, but increases the cost. If you buy just a "bare" glass with a matrix, the wizard will have to reglaze it from the old frame, which takes longer and requires accuracy, which can also affect the cost of services.
Price comparison: original vs copy
The price difference between the original display and its counterparts is significant, and it is this parameter that most often determines the choice of the user. However, the savings here can be deceptive. Let's take a look at what you get for your money in each price segment for the Xiaomi Poco M3 model.
Original displays are the benchmark of quality, they have factory color calibration, maximum brightness and perfect oleophobic coating, and the touch layer on these screens responds to touch instantly, without delay. 3500-4000 RUB and above, not counting the work of the master.
High-quality copies (High Copy/OEM) are the most popular segment, and visually they are almost the same as the original, but if you look at it in detail, you can see slightly lower brightness or slightly thicker bezels around the matrix. For everyday use (social media, video, calls), this is a great option, which costs 30-40% less than the original.
The most budget-friendly option is refurbished, which are broken originals that have been re-addressed to glass, often with image defects, uneven lighting around the edges (the "lamp effect") and very fragile glass, which can save up to 50 percent, but the life of such a screen is unpredictable.
| Type of display | Part price (ruble) | Quality of color reproduction | Term of service |
|---|---|---|---|
| Original (Original) | 3500 - 4500 | Perfect. | Complete cycle |
| Copy (High Copy) | 2000 - 2800 | Good. | 1-2 years |
| Rebuilt | 1200 - 1600 | Medium/Low | 3-6 months |
| Cheap analogue | 800 - 1100 | Low. | 1-3 months |
It is worth noting that prices are tentatively quoted and can vary depending on the exchange rate and region. In Moscow and St. Petersburg, the cost of parts and works is traditionally higher than in the regions.
Cost of work in the service center
If you don't have electronics repair skills and a tool, going to a service center is the only sensible solution, and the cost of replacing a display with a Poco M3 is the complexity of dismantling the back cover and the accuracy of connecting the plumes.
On average, the masters charge from 1000 to 2000 rubles for work. This amount includes disassembling the device, removing old glue, installing a new module, checking the tightness (as far as possible without factory equipment) and testing all the functions of the phone. In authorized centers, the price can be fixed and up to 2,500 rubles, but you get an official guarantee.
💡
Always ask about the job guarantee. In good services, the warranty for a replacement display is 3 to 12 months, which protects you from factory defects or master mistakes.
Private craftsmen or “home workshops” can offer a price of 500-800 rubles. However, the risk of running into an unqualified specialist is higher here. Sloppy disassembly of the Xiaomi Poco M3 can damage the camera plume or speaker, since they are located very close to the mounting area of the screen.
- 📉 Rear cover removal (requires heating and suction cups).
- 🔌 Disabling the display and touch screen plumes.
- 🧹 Cleaning the frame from the remnants of old glue B-7000.
- ✅ Final check of sensor, sound and vibration response.
Some services offer a 30-minute replacement service, which is possible if the wizard has a finished module assembled with a frame, but if you need to glue the glass or wait for a spare part, the process can take from a few hours to a couple of days.
Can I replace the screen myself?
Self-repair is possible, but only if you have experience with small electronics. the Poco M3 has a plastic back cover that is easier to remove than glass, but it still requires careful warming up around the perimeter. The main danger is to damage the fingerprint scanner plume that is glued to the lid.
To replace, you will need a dryer (construction or household at a minimum), a sucker, mediators, a set of screwdrivers (cross and star), adhesive B-7000 or B-6000, and a new display. The process begins with heating the back cover to 70-80 degrees.
⚠️ Attention: Don't overheat the phone! The plastic on the back cover can warp when heated, and the battery can swell. Keep the hair dryer in motion, don't heat one dot for longer. 5-7 seconds.
Once the lid is removed, you have to unscrew a lot of screws that fix the plastic protection of the motherboard, and only once you get to the board, you can turn off the display plume, and you build it in the reverse order, with the mandatory application of a new layer of glue to fix the lid.
☑️ Checklist for self-repair
If you've never taken a phone apart, you'd better not take a risk, and a mistake in connecting the plume could short-circuit and burn the power controller on the board, making it economically inefficient to repair it.
Where to buy a high-quality display for Poco M3
Finding a reliable seller is half the success. Buy screens better in specialized parts stores or on trusted marketplaces with a seller's rating. Avoid dubious sites with suspiciously low prices.
When ordering online, be sure to look at reviews, especially those that have photos of the real product. Pay attention to the packaging: good screens come in a hard box with a bubble film to eliminate damage during transportation.
How to check the screen before installation?
Popular marketplaces to buy include AliExpress (high-rated stores), local forums (like 4PDA), and local radio parts stores in major cities. When you buy from a physical store, you can visually assess the quality of the matrix before paying.
It is important to check with the seller whether the screen is assembled with a frame. For beginners, the option with a frame is preferable, since it eliminates errors when gluing and aligning the module in the case.
Frequent questions and final recommendations
To sum up, replacing the screen with the Xiaomi Poco M3 is a necessary procedure, but requires a balanced approach to the selection of parts. You should not chase the lowest price if you plan to use the phone for a long time. The optimal choice for most users will be a high-quality copy (High Copy) or a restored original from a trusted seller.
If the budget allows, it is better to choose the original module, which ensures that the phone will work the same way as the day of purchase. Remember that the stingy pays twice: a cheap screen may require a replacement in six months, and you will spend the money again on the work of the master.
💡
The best repair strategy is to buy a high-quality framed version and entrust the installation to a trusted manufacturer with a warranty, which is a balance between price and reliability.
Always keep your checks and warranty cards. If you have problems with your new screen (lanes appear, touchscreen detachment), you can replace the defective part for free. Electronics repair is a lottery, but proper preparation minimizes the risks.