Why Xiaomi screens break down and when you need a replacement
The display is the most vulnerable part of the smartphone, and Xiaomi (including sub-brands Redmi and POCO) is no exception. According to service centers, up to 60% of calls are due to screen damage: cracks, broken pixels, a broken touchscreen or no image, the reasons range from a banal fall to factory defect (for example, detachment of the plume in the Redmi Note 10 Pro after a year of operation).
A cracked screen doesn't always require a full replacement, for example, if only the glass panel is damaged and the OLED/AMOLED/LCD is intact, you can get by with a glass replacement -- it's 30 to 50 percent cheaper. But 90 percent of the time, when you hit hard, you have to change the entire display module, which is more complicated and expensive.
It is important to distinguish software failures (such as a buggy touchscreen after updating MIUI) from physical damage. If the screen does not respond to touch, but the image is there, try resetting through Settings → About Phone → Resetting. If the display is completely black or with artifacts, it is a 100% hardware problem.
How much does it cost to replace the display on Xiaomi in 2026: price table
The cost of replacement depends on three factors: the model of the smartphone, the type of display (original, OEM, copy) and the region (in Moscow and St. Petersburg prices are higher by 15-20% than in the regions).
| Xiaomi model | Type of display | Price at the service center (₽) | The price at the private master (₽) |
|---|---|---|---|
| Redmi Note 12 Pro+ | Original (AMOLED) | 18 000 – 22 000 | 14 000 – 17 000 |
| POCO X5 Pro | OEM (similar to the original) | 12 000 – 15 000 | 9 000 – 11 000 |
| Xiaomi 13 Lite | Original (AMOLED) | 20 000 – 24 000 | 16 000 – 19 000 |
| Redmi 10C | Copy (LCD) | 5 000 – 7 000 | 3 500 – 5 000 |
| Xiaomi 12T Pro | Original (AMOLED, 120 Hz) | 25 000 – 30 000 | 20 000 – 23 000 |
Important: prices for original displays for flagships (series Xiaomi) 13/14) grew 25% s 2023 - A year due to a shortage of components. 8 000 ₽ Xiaomi 13 Pro, it's guaranteed to be fake or used module, and original parts for new models are only shipped through official channels, and they rarely fall below the price tag. 15 000 ₽.
You can save money by choosing OEM-display (produced in the same factory as the original, but without the Xiaomi logo) or a premium copy (e.g. from the same factory as the original) BOE But be prepared for possible problems:
- 🔹 Poor color reproduction – copies often have a cold hue or low brightness.
- 🔹 Lack of Always-On Display – on non-original AMOLED This function may not work.
- 🔹 Weak oleophobic layer - the screen is covered faster with greasy traces.
- 🔹 Inoperable light sensor – automatic brightness control is turned off.
💡
Before replacing, ask the wizard to show the display in work: check the display of black (on AMOLED it should be deep, without gray) and the sensitivity of the touchscreen at the edges of the screen.
Where to change the screen cheaper: comparison of options
You have three main options where you can replace the display on Xiaomi. Each has pros and cons:
- Official Xiaomi Service Center ✅ Pros: original spare parts, 6-12 months warranty, factory sealing (important for water protection, for example, in Xiaomi 13 Ultra). ❌ Cons: the highest prices, the queue for repairs (on average 3-5 days), sometimes refuse to repair phones with unofficial firmware.
- Informal service centres ✅ Pros: prices are 20-30% lower than in official centers, often offer express repairs (1-2 hours). ❌ Cons: risk of running into a fake, the warranty is usually 1-3 months, there may be problems with screen calibration.
- Private craftsmen (Avito, Yula, local ads) ✅ Pros: minimum prices, flexibility (you can negotiate a discount for cash settlement). ❌ Cons: no guarantee, high risk of poor-quality repairs (poor soldering of plumes, dust under the screen), possible problems with Touch ID (on models with a sensor in the display, for example, Xiaomi Civi 3).
If your smartphone is guaranteed, be sure to contact the official service - self-repair cancels the warranty. For phones older than 2 years it is more profitable to look for proven informal workshops with good reviews. For example, in Moscow and St. Petersburg, the networks "FixPrice", "Re:Store" and "TechnoDoctor" have proven themselves well.
💡
For models with a subscreen fingerprint scanner (for example, Xiaomi 12S Ultra), it is better to replace the display only in the official service - private masters often can not properly reconfigure the sensor.
How to check the originality of the display after replacement
Even if you were given an "original" screen, there's a chance it's fake. Here are 5 ways to check if you've been cheated:
☑️ How to distinguish the original Xiaomi display
The most reliable way is to use service codes:
- Open the Phone app and type ##6484##.
- Choose the Manual Test → Display.
- Check the color display (copies often show stripes or uneven backlights).
- Conduct a multi-touch test (simultaneous touch in 5-10 points – on non-original screens, touches may “disappear”).
Another sign of forgery is a resolution mismatch, such as the Redmi Note 11 Pro+ with the original 1080×2400 display, the copy can be 1080×2340. You can find out the current resolution in the settings (Settings → Display → Screen Resolution) or through the AIDA64 app.
⚠️ Attention: On models with LTPO-displays (e.g., Xiaomi) 12T Pro) non-original screens do not support adaptive refresh rates (1-120 Hz); instead, there will be fixed 60 or 90 Hz.
Step-by-step: how to replace the display yourself
If you want to save money and change the screen yourself, you will need:
- 🔧 Screwdriver kit (cross, flat, Pentalobe for some models).
- 🔥 dryer or heat tile.
- 📱 Screen-take-down suction cups.
- 🧲 Plastic or metal blade.
- 🔋 New display module (only order from trusted sites, for example, AliExpress from sellers with a rating of 98%+).
Sequence of action:
- Turn off the phone and remove it. SIM-map.
- Heat the screen edge with a hair dryer (~60°C) for 2-3 minutes.
- Carefully tuck the screen with suction cups and insert a spatula to separate it from the body.
- Unscrew the screws holding the metal plate over the plumes.
- Disconnect the battery plumes and display (use plastic tweezers!).
- Install a new display, plug in the plumes and assemble the phone in reverse order.
The hardest part is to stick the new screen properly. Use 3M double-sided tape or B-7000 special glue. If the screen is glued unevenly, white spots can appear when pressed (called the "moir effect").
⚠️ Attention: On models with IP53/IP68 (for example, Xiaomi 13 Pro) after self-replacement of the screen, water protection is lost (~2 000 ₽).
What if the screen doesn’t work after replacement?
Frequent Display Replacement Mistakes and How to Avoid Them
Even experienced craftsmen sometimes make mistakes that lead to re-repairs.
- 🔌 Damage to the battery plume - if you accidentally hit it with a shoulder blade, the phone will stop turning on. Always turn off the battery first thing!
- 🔥 Overheating the screen with a hair dryer - if you hold too close, you can melt plastic clips or damage the matrix.
- 🧲 Using metal tools -- scratches on a frame or matrix will cause a deterioration in appearance.
- 🔄 Incorrect touchscreen calibration – after replacement, you may need to reset settings through Settings → System system → Resetting settings → Resetting touchscreen settings.
Another common problem is the yellow spots on the new screen, which appear if:
- They used a cheap glue that turns yellow over time.
- The display was stored in the warehouse in the wrong conditions (waterfall).
- Low quality matrix (often found on Redmi copies)
If the spots appeared in the first days after replacement, contact the wizard - this is a guarantee case, if in 2-3 months - you have to change the screen again.
Should you repair the old Xiaomi or should you buy a new one?
Sometimes it costs 50-70% to replace a display, and in those cases, you should consider buying a new model.
- 📱 Phone over 3 years old (e.g. 2019 Redmi Note 8 Pro).
- 💰 The cost of repairs exceeds 10 000 ₽ for the budget model (up to 20 000) ₽).
- 🔋 Battery worn out (capacity less than 70% of nominal value).
- 🚀 There are more modern analogues on the market at a similar price (for example, instead of repairing Redmi). 9A for 8,000 ₽ You can buy a new Redmi. 12C for 10,000 ₽).
The exceptions are flagships (Xiaomi 12/13) and models with unique features (for example, Xiaomi MIX Fold 2), which are justified in repairing, even if the cost is close to the price of a new phone.
Before making a decision, check the market value of your model on Avito or Yula. if the phone is in good condition (except for the screen) costs less than 15 000 ₽, And it costs 10,000 to repair. ₽, It is more logical to sell it for spare parts and buy it for a new model.
💡
For models with a foldable screen (for example, Xiaomi) MIX Fold 3) Replacement of the display in the official service can cost up to 50 000 ₽. In such cases, it is often more profitable to arrange a trade-in from Xiaomi and get a discount on a new device.