Xiaomi Redmi 8 is still a popular budget smartphone, despite the release of new models. One of the most common problems with this device is a broken or faulty display. If you encounter a cracked screen, flicker or no image, the first question is: how much will it cost to replace the display and where is the best place to do it?
The price of a Redmi 8 display can vary greatly depending on the screen type (original or analog), the place of purchase (service center, online store, AliExpress) and even the region. In this article, we will analyze all the nuances from average prices to proven ways to save without loss of quality, and you will learn how to distinguish the original module from a fake and what to do if new problems arise after replacement.
It's important to understand that replacing a display is not just the cost of the screen itself, it's the work of the wizard, and sometimes the extra cost of glue, plumes or diagnostics. We've gathered up-to-date data for 2026 so you can make an informed decision whether to repair yourself, contact the service or even buy a new phone.
How much does the original display for Xiaomi Redmi 8 cost?
Original Display Module for Redmi 8 (articular MDY10-0001-00 or MDY10-0001-01) — It's a guarantee of full compatibility with the phone, the correct operation of the sensor and no problems with color reproduction.
To date, the cost of the new original display in official Xiaomi service centers or from trusted suppliers varies within:
- 📱 4 500 – 6 000 rubles – average price in Russian service centers (including VAT and markup).
- 🌍 3 200 – 4 800 rubles – the cost when ordering from China (AliExpress, Taobao) including delivery.
- 🔄 2,500 – 3,500 rubles – used original displays (taken from donor phones), but there is a high risk of hidden defects.
Important: in the official services of Xiaomi, you will most likely be offered a complete replacement of the display module (screen). + sensor + frames), whereas informal workshops may try to sell only glass or a separate sensor, which is cheaper but fraught with calibration problems.
⚠️ Warning: If you are offered an original display for Redmi 8 for less than 3,000 rubles, this is a reason to be wary. Often under the guise of "original" sell high-quality copies or restored modules. Check for holograms, factory packaging and articles.
Where to buy the original display:
- 🏢 Xiaomi’s official service centers – quality guarantee, but high price.
- 🛒 Large online stores (Citron, M-video, DNS) — occasionally.
- 🌐 AliExpress/Taobao — cheaper, but longer delivery and risk of running into a fake.
- 🔧 Proven workshops – some buy original parts in bulk and sell with a small margin.
Prices for non-original (analog) displays
If you have a budget, you can consider the non-original displays for the Redmi 8. They are cheaper, but the quality varies from "acceptable" to "completely non-functional."
| Type of display | Price (rupe) | Pluses | Cons |
|---|---|---|---|
| OEM (Original Equipment Manufacturer) | 3 000 — 4 500 | Quality is close to the original, good color reproduction | There may be no oleophobic coating, sometimes brightness problems |
| Copy (high quality copy) | 1 800 — 3 000 | Low price, fast phone recovery | Colors may differ, there may be "broken" pixels, short service life |
| Low-Cost (cheap equivalent) | 1 000 — 1 800 | Minimum cost | Poor sensor sensitivity, distorted colors, risk of rapid failure |
| Donor-removed (b/y) | 1 500 — 2 500 | Original module at a low price | Risk of hidden defects, wear of oleophobic coating, possible scratches |
When choosing an analogue, pay attention to:
- 🔍 The best copies are made by Tianma, BOE, Truly (check with the seller).
- 📄 Guarantee – Reliable sellers give at least 3 months.
- 📦 Set - in the set should be glue, plumes and instructions.
- 📱 Reviews – check if there are any complaints of flickering or a broken touchscreen.
⚠️ Attention: Cheap counterparts often have an automatic brightness problem, with the screen becoming too bright or dim, because there is no original light sensor in the module.
Where to buy analogues:
- 🛒 AliExpress is a big choice, but it's a big risk of falling into a low-quality product. Look for sellers with a rating above 98% and orders over 1,000.
- 🏪 Local parts stores – you can touch the product before buying, but prices can be inflated.
- 🔧 Repair shops – some sell parts with a warranty.
💡
Before buying an analog, check if it supports Always On Display (if it was in the original). Many cheap copies do not know how to correctly display time on a switched-off screen.
Cost of work to replace the display
Even if you bought the display yourself, you still need to install it correctly, and the price depends on the complexity of the repair and the level of the service center:
- 🔧 Official service Xiaomi — 1,500 — 2,500 rubles. Plus: work warranty, minus: high price.
- 🏢 Unofficial service centers - 800 - 1,800 rubles. the quality depends on the master.
- 👨🔧 Private masters (on ads) - 500 - 1,200 rubles. the risk of running into an amateur.
- 🏠 Self-substitution – 0 rubles, but requires skills and tools.
What is included in the cost of work:
- 🔨 Dismantling old display (sometimes requires heating to remove glue).
- 🧩 Installation of a new module with connection of plumes.
- 🔧 Checking the performance (sensor, camera, speaker).
- 🧴 Applying a new glue (if not included with the display).
Average total cost of repair (display) + work) in 2026:
- 📱 Original display + official service: 6000 - 8500 rubles.
- 📱 Quality analogue + unofficial service: 3000 - 5 000 rubles.
- 📱 Cheap analogue + private master: 1,500 - 3,000 rubles.
⚠️ Note: If the proximity sensor or autobrightness stop working after the display is replaced, this is a sign that the master did not carry the desired plumes or installed an incompatible module.
The sensor responds to touches across the screen|Colors are displayed naturally, without yellowness|Automatic brightness works correctly|The approach sensor turns off the screen during the call|No broken pixels or flickering-->
Replacement of the display: is it worth the risk?
If you have experience in electronics repair, you can try replacing the display yourself, which will save you 1,000 to 2,000 rubles at work as a master, but you will need to:
- 🛠️ Tools: plastic shoulder blades, sucker, hair dryer (for heating glue), tweezers, screwdriver.
- 🧴 Glue: Better to use B-7000 or special glue for displays.
- 📺 Instructions: YouTube has detailed videos on the dismantling of Redmi 8.
- ⏱️ Time: For beginners, the process may take 2-3 hour.
The advantages of self-replacement:
- ✅ Savings on the work of the master.
- ✅ Control over the process (you can choose a high-quality glue, gently connect the plumes).
Cons and risks:
- ❌ Damage to plumes – if you sloppy pull, you can tear the contacts of the camera or speaker.
- ❌ Dust infestation – without a clean room under the screen can remain moulds.
- ❌ Incorrect calibration – the sensor can work with displacement.
- ❌ Loss of tightness – if the glue is applied poorly, moisture will appear over time.
If you are planning to do a repair, here is a step-by-step algorithm:
- Turn off the phone and remove it. SIM-map.
- Heat the screen edge with a hair dryer (temperature) ~60°C) to soften the glue.
- Put a plastic blade on the display and carefully separate it from the body.
- Turn off the battery and display plumes (it is important not to confuse!).
- Install a new display, connect the plumes and check the operability.
- Apply glue around the perimeter and press the screen (you can use a heavy book).
What if the display does not work after replacement?
Where is the cheapest to replace the display on Xiaomi Redmi 8
If you need to save money but don’t want to risk quality, consider the following options:
- 🌍 Ordering a display with AliExpress + The best way to do it is to have a local master repair. OEM-display can be bought for 2,500 rubles, and work to do for 1,000 rubles, total 3,500 rubles.
- 🏢 Promotions in service centers - sometimes discounts for repairs (for example, "replacement of the display for 2 990 rubles.
- 🔄 Exchange for a used phone - some workshops offer to pass the Redmi 8 with a broken screen in the credit of repairing another device.
- 🤝 Group orders – if you have someone familiar with the same problem, you can order displays in bulk and save on shipping.
Comparison of options on cost and risk:
| Option | Cost (rupe) | Risks. | Duration of repairs |
|---|---|---|---|
| Official service | 6 000 — 8 500 | Minimum | 1-3 days |
| Informal service + OEM-display | 3 500 — 5 000 | Medium (quality of work) | 1-2 days |
| AliExpress + master | 3 000 — 4 500 | High (display quality) | 2-3 weeks (delivery) |
| Self-sustaining replacement | 2 000 — 3 500 | Very high (phone breakdown) | 2-4 hours |
⚠️ Note: If you buy a display on AliExpress, look for the module version. 8 There are two types of screens: - MDY10-0001-00 (early-parties), - MDY10-0001-01 (They have different plumes! Check your version before you buy (you can see in your phone settings or on the old part).
💡
The most affordable and relatively safe option is to buy OEM-You can use AliExpress to get a high-rated display from a seller and replace it with a trusted shop, and you can save up to 50 percent on the official service.
Frequent problems after replacing the display and how to avoid them
Even if the replacement is successful, sometimes unpleasant surprises come up, and here are the most common problems and ways to solve them:
- 🔳 The sensor works with displacement – you need to recalibrate the screen (in settings or through the engineering menu).
- 🎨 Distorted colors (yellowish or bluish) are a sign of a cheap analogue. No solution, only a replacement with a quality module.
- 🔋 Fast battery discharge – perhaps the master damaged the battery during disassembly or did not connect the plume correctly.
- 📞 The proximity sensor does not work – check if the master has moved a small plume with a sensor from the old display.
- 🔄 The screen spontaneously turns off - a problem with the plume contacts or a malfunction of the new module.
How to avoid problems:
- 📋 Require a work warranty and spare parts (at least 1 month).
- 🔍 Check the display before paying – turn on your phone and test the sensor, camera, speaker.
- 📸 Take a picture of the disassembly process - if something goes wrong, there will be proof for the claim.
- 📄 Keep a check – many workshops refuse to admit mistakes without a document.
If the problem appears immediately after the repair, immediately contact the service. Under the law on consumer protection, you have the right to free repair of defects during the warranty period (even if the warranty is only for work, not for a spare part).
How to check the display before buying?
When Replacing the Display Is Not Suitable: Alternative Solutions
Sometimes repairing the Xiaomi Redmi 8 can cost you almost the same amount as buying a new phone, and in such cases, you should consider alternatives:
- 🆕 Buy used Redmi 8 in good condition - on Avito or Yula you can find devices for 5 000 - 7 000 rubles with a working screen.
- 🔄 Trade-in – some stores (for example, Messenger or MTS) accept old phones as a result of the new one.
- 📱 Buying a new budget smartphone – Redmi 9A POCO C50 They cost about 8 000 – 10 000 rubles and will be more reliable than the repaired Redmi 8.
- 💰 Sale for spare parts - if the phone is fully serviceable, except for the screen, it can be sold for 1,500 - 3,000 rubles for disassembly.
When repairs are unjustified:
- 🔋 If in addition to the display, the battery or motherboard is defective.
- 📉 If the phone is more than 3-4 years and morally obsolete.
- 💸 If the cost of repair exceeds 50% of the price of a new phone.
According to the analysis of the market in 2026, the replacement of the display on Xiaomi Redmi 8 is justified only if the total cost of repair does not exceed 4 000 – 5 000 rubles.
💡
If your Redmi 8 has other problems besides a broken screen (e.g., the battery is fast going down or brakes), then repairing the display won’t solve these issues.