Owners of Xiaomi Redmi 9T often face a situation when the screen of the device is broken or no longer responsive to touch. At this point, the first and most pressing question is the cost of replacing the display module. The market for spare parts is now full of offers, but prices can vary by several times, which confuses the untrained user. Understanding what you pay for and whether you are worth saving is quite difficult without deep immersion in the specifics of components.
Price of the display for Xiaomi Redmi 9T It's not just the cost of the matrix, but it's also a lot of factors that go along with the build quality, the type of glass you use, and the seller's warranty. IPS-FullHD resolution panel+, This makes it a more responsible process than budgetary HD-In this article, we will discuss in detail the pricing, types of parts and nuances that will help you not overpay and get a quality result.
Many users mistakenly believe that any black screen is right for their device, but the specifications of the original display and the cheap copy can be very different, which affects not only the brightness of the picture, but also the work of the fingerprint scanner, which is built directly into the on button on the side, so before you make a purchase, you need to clearly understand what component you choose.
Factors Affecting the Cost of a Display Module
The main factor determining the price is the origin of the parts. There are original modules on the market, taken from disassembled devices or produced in official supplier factories, and so-called "copies" or analogues. The original display for the Redmi 9T will cost much more, since it fully meets the factory specifications for color reproduction and touchscreen sensitivity, copies can have a dimmer backlight and distort colors.
The second important aspect is the configuration. You can buy just a matrix with glued glass (called a module assembled) or a separate matrix without frames. Replacing the module assembled is faster and easier, because it does not require work with glue and press to remove broken glass. Which is why the module assembled usually costs more, but for self-repair is the most preferred option, minimizing the risk of errors.
The price is also affected by the presence of bezels. The displays with pre-installed plastic bezels for the Xiaomi Redmi 9T avoid the problems with re-adhesives of old bezels, which often deform when heated. If you buy a display without a bezel, you will have to carefully transfer all the small details from the old broken screen, which requires certain skills and tools. The savings in this case can be significant, but the risk of damaging fragile plumes increases.
⚠️ Warning: Buying a bezel-free display is only justified if you have microelectronics experience and special adhesive tools. Otherwise, you risk getting a device with gaps between the case and the screen.
Comparative table of prices for displays for Redmi 9T
To navigate current market offerings, consider the average prices for different types of display modules. Costs can vary by region, currency rate and specific seller. Below are the data relevant for the current period, which will help you estimate the repair budget.
| Type of display | Complementation | Approximate price (ruble) | Image quality |
|---|---|---|---|
| Original (Service Pack) | The module assembled with a frame | 3500 - 4500 | Reference |
| Original (OEM) | Module assembled without frames | 2800 - 3500 | Reference |
| Copy (High Copy) | The module assembled with a frame | 1800 - 2500 | Good. |
| Copy (Econom) | Only matrix + glass | 1200 - 1600 | Mediocre |
As you can see from the table, the difference in price between the original and the quality copy can reach a thousand and a half rubles. However, choosing a cheap counterpart for 1200 rubles, you risk getting a screen with a low brightness that will not read well in the sun, and a touch screen that can "glutch" with a few fingers at the same time. For the Redmi 9T, which is often used to view content, this is critical.
The cost of replacement work also varies: in authorized service centers, the price for the work can be from 1000 to 2000 rubles, while private craftsmen are ready to perform a replacement for 500-800 rubles. It is important to note that a professional replacement often includes checking other nodes of the smartphone and a guarantee of tightness of the case (if special glue is used).
💡
When buying a display, be sure to check the integrity of the plumes. Even a microscopic tear can lead to the inoperability of the touchscreen or the appearance of stripes on the screen.
Original vs. Copy: How not to make a mistake when choosing
Visually distinguishing a quality original from a good copy on the Xiaomi Redmi 9T can be difficult, especially if both screens are off. However, there are a number of signs to look out for when inspecting. The original matrixes have uniform lighting throughout the area and correct color reproduction, while copies often sin with a yellowish or bluish shade of white.
Another important parameter is the oleophobic coating, which is applied to the original displays with a special technology, which provides easy slipping of the finger and resistance to fingerprints, cheap analogues may not have this coating at all, or it will disappear after a couple of weeks of use, and you can check this by putting a little water on the screen: the original drop will remain collected, and the bad copy will spread.
- 🎨 Color rendering: Include white image – the original should shine pure white, without going into the gray or green spectrum.
Also worth noting is the thickness of the module: the original Redmi 9T displays have a specific thickness that meets factory standards. Copies can be thicker, which will cause the screen to bulge out of the body or, conversely, sit too deep, collecting dust in the gaps. This is especially true for models with plastic frames.
The myth of "factory glue"
Instructions for self-replacement of the display
If you decide to save on service center services and replace the display with Xiaomi Redmi 9T yourself, you will need a set of tools and a certain amount of caution.The process is not complicated, but requires care, especially when working with plumes and plastic latches of the case.
The first step is always to turn off the device and retrieve it. SIM-Then you have to warm up the screen with a hair dryer or a hot water heater to a temperature of about 80-90 This will soften the glue that holds the back cover. Be careful: don't overheat the battery, it shouldn't last longer than the heating time. 3-4 minute.
☑️ Replacement tools
When you remove the back cover, unscrew all the screws that hold the motherboard plastic frame. Then turn off the battery, display and touchscreen plumes. When you install the new module, make sure the connectors are snapped to a characteristic click. Assembly is done in reverse order. Use the B-7000 glue to lock the new screen with a thin strip of the frame perimeter.
⚠️ Attention: Before final assembly and gluing of the screen, be sure to check its operability. Connect the plumes, turn on the phone and check the touchscreen in all zones, as well as the absence of broken pixels.
The important thing is to remove the residues of old glue from the case, and this should be done carefully, using a plastic card or a special solvent, so as not to damage the plastic elements of the Redmi 9T body. If you leave irregularities, the new display can crack on the first fall or even light pressure.
Typical problems after screen replacement
Even with a high-quality display, there can be unexpected situations. One of the most common problems is a non-functioning proximity sensor. On the Xiaomi Redmi 9T, it is located at the top of the screen, and if an error was made or the wrong adhesive was used, the sensor can be blocked.
Another common problem is touchscreen dead zones, which can be related to the defect of the part itself, as well as to poor plume contact, sometimes reconnecting the plume helps, but most require a module replacement, and users can experience the effect of ghost touch, when the phone responds to touches that were not there.
- 📉 Low brightness: If the new screen shines dimly even at its maximum, it’s likely a cheap, poorly-lit copy.
- 🌈 Color distortion: Incorrect calibration of the matrix is characteristic of non-original spare parts.
- 🔋 Fast discharge: Low-quality display power controller can consume more power than original.
In some cases, after the screen is replaced, you may need to calibrate the touchscreen, for this purpose, there are special tests in the Xiaomi engineering menu. Enter the code # # #6484## in the Phone app to get into the CIT menu, where you can test all the features of the new display.
💡
If the fingerprint scanner stopped working after the screen was replaced, check if you damaged the plug of the switch button during disassembly, as it is responsible for this function in Redmi 9T.
Should the Redmi 9T be repaired in 2026-2026?
The question of the economic feasibility of repairs is always relevant. Xiaomi Redmi 9T was released in early 2021 and still remains popular due to its autonomy. However, if the cost of the original display with work exceeds 50-60% of the market value of the used smartphone, repair may not be advisable.
On the other hand, if the phone is in excellent technical condition, the battery holds the charge well, and a broken screen, replacing the display will extend the life of the device for another 2-3 years. Given that new budget employees in this price segment often have compromises in the materials of the case, restoring the proven Redmi 9T looks like a sensible step.
If you plan to sell the device, installing the original display will significantly increase its liquidity. Buyers are more willing to take a phone with original components, even if it is used.