How much does the display on Xiaomi Redmi Note 8 in 2026: prices, where to buy and what to look for

Why the Redmi Note 8 screen breaks and when to change it

The Xiaomi Redmi Note 8 screen is one of the most vulnerable spots of this smartphone. Despite the protection of the Gorilla Glass 5, falls from a height of more than 80 cm or bumps to the corners often lead to cracks or complete failure of the sensor. According to service centers, more than 60% of calls on the Redmi Note 8 are associated with damage to the display module โ€“ a record among budget smartphones Xiaomi 2019-2020.

For example, if only the top glass panel is damaged and the matrix and sensor are working, you can do with a glass replacement (cost from 1,500) โ‚ฝ). But 80 percent of the time, the entire display module is affected, and you can't do without a full replacement:

  • ๐Ÿ”น Black screen with working backlight (visible in bright light)
  • ๐Ÿ”น Multicolored stripes or artifacts when included
  • ๐Ÿ”น The sensor is not working (partially or completely)
  • ๐Ÿ”น Image flickering or spontaneously fading

Important: if after the fall, the smartphone stopped turning on, the problem may not be in the screen, but in the disconnected plume or damaged board, in which case the diagnosis in the service is mandatory - sometimes it is enough to simply plug the plume back (cost of work - from 500 times). โ‚ฝ).

๐Ÿ“Š What happened to your Redmi Note 8?
Screen cracked.
The sensor stopped working.
There are stripes on the matrix.
Dropped and out.
Another option

How much does the original display on the Redmi Note 8 cost in 2026?

Pricing for original display modules for Redmi Note 8 (detail code โ€” MB-N8-Display) It depends heavily on the supplier and equipment, and in official Xiaomi service centers, the cost starts from 6,500. โ‚ฝ, But there's nuances:

  • ๐Ÿ“ฆ Full Assembly (full module with frame, sensor and matrix) โ€“ 7,200โ€“8,500 โ‚ฝ
  • ๐Ÿ”ง Just the matrix. + sensor (without frames) โ€“ 5,800โ€“6,800 โ‚ฝ
  • ๐Ÿ”„ Original used (with a guarantee of 3 months) โ€“ 4,500โ€“5,500 โ‚ฝ

The official displays are supplied by Tianma (Chinese manufacturer of matrixes for Xiaomi), and they can be distinguished by:

โš ๏ธ Attention: AliExpress and other sites often sell "originals" with interlaced plumes. Check for a Xiaomi hologram on the back of the module and a serial number that should match the data in Settings. โ†’ The phone. โ†’ Version. MIUI (Hardware info section).

Type of displayPrice (โ‚ฝ)Where to buyGuarantee
Original (new, full assembly)7 200โ€“8 500Official Xiaomi SCC, MegaFon Service, Communication Service12 months
Original (b/u, verified)4 500โ€“5 500Avito, Yula, service centers with parsing3โ€“6 months
Neo-original (premium, BOE)3 800โ€“4 800AliExpress, Beru, local workshops6 months
The Neo-Original (Economist, Unknown)2 500โ€“3 500Chinese sites, small repairmen1 month or not

The cost of replacement work in the service varies from 1,500 to 3,000 โ‚ฝ, depending on the complexity (for example, if you need to re-paint the frame or replace the glue), the total cost of repairs will be 9 000-11 500 โ‚ฝ with original display and 5,000-7,500 โ‚ฝ original.

๐Ÿ’ก

Replacing the display in an unofficial service with the original part will cost 20-30% less, but you will lose the warranty on the phone (if it is still valid).

Non-Original Displays: Should You Save Money?

Displays from third-party manufacturers (BOE, JDI, unnamed Chinese plants are 1.5-2 times cheaper than the original ones, but they have disadvantages:

  • ๐ŸŽจ Distorted colors โ€“ often a cold hue or green undertone
  • โ˜€๏ธ Weak brightness (up to 300 nits instead of 450 in the original)
  • ๐Ÿ‘† Poor Sensitivity of the Sensor (Tap Missing)
  • ๐Ÿ”‹ Increased battery consumption (up to 15% due to unoptimized matrix)

However, some non-original modules (BOE NT36672A) They're almost as good as the original:

  • ๐Ÿ” Marking on the plume: BOE FHD+ 6.3"
  • ๐Ÿ“ Accurate matching of connectors and holes under the camera / sensors
  • ๐ŸŽ›๏ธ Support DC Dimming (adjusting brightness without flickering)

If the budget is limited, it is better to choose a premium non-original from the BOE or JDI โ€” They're 1.5 to 2 years without problems (< 3 000 โ‚ฝ) Often fail in 3-6 months.

How to check the display before buying?
1. Ask the seller to shoot a video with the matrix test (colors, gradients, black screen at maximum brightness). 2. Check the serial number of the module through the Xiaomi Authenticity Check service (available on the mi.com website). 3. Pay attention to the packaging: the originals come in antistatic packages with the Tianma or Xiaomi logo.

Where to buy a display for Redmi Note 8: proven options

The choice of place to buy depends on your priorities: speed, price or reliability. We tested 5 popular options and ranked:

  1. Xiaomi's official service is the most reliable, but expensive. Pros: 1 year warranty, original parts, authentication. Minus: price 20-30% higher than the market.
  2. AliExpress (Shops Xiaomi Mall, MI Global Store: 30-40% lower, 2-4 weeks delivery, risk of forgery - about 15%.
  3. Local service centers (for example, Fix Price Repair, Phone Repair 24) โ€“ average prices, 6-month warranty, quick repairs (1-2 days).
  4. Chinese wholesale sites (1688.com, Taobao โ€“ lowest prices (from 2,800) โ‚ฝ original, but need intermediaries to purchase and deliver.

For most users, a local service with a guarantee is the best option. If you are willing to wait and take risks, AliExpress will save up to 40%.

  • ๐Ÿšฉ Do not provide a photo of the serial number of the display
  • ๐Ÿšฉ Refusing to shoot video with matrix test
  • ๐Ÿšฉ Specify โ€œ100% originalโ€ without holograms and documents

๐Ÿ’ก

Before buying a display on AliExpress, check the seller's reviews for the keywords: "original", "fake", "dead pixel". If more than 5% of customers complain about marriage, look for another seller.

Should the Redmi Note 8 be repaired in 2026?

Redmi Note 8 was released in 2019, and today it can be bought for used for 6000-9000 โ‚ฝ. If the repair of the display costs 7000-10000 โ‚ฝ, It is more logical to sell a broken phone and buy a new budgetary (for example, Redmi Note 12 for 12 000). โ‚ฝ). However, there are cases where repairs are justified:

  • ๐Ÿ’ผ The phone is used as a working tool (tied to 1C, banking applications, etc.)
  • ๐Ÿ”„ You have a spare case or battery โ€“ you can sell them separately and reduce costs
  • ๐Ÿ“ฑ The phone is used as a second device (for example, for the SIM-card)
  • ๐ŸŽฎ You use it for gaming or multimedia (the Redmi Note 8 is still one of the best in its class in color reproduction)

If you need a phone just for calls and social networks, repairs cost 8,000 dollars.+ โ‚ฝ In this case, it is better to consider alternatives:

OptionCost (โ‚ฝ)PlusesCons
Repair with the original display9 000โ€“11 000Full-fledged phone for 1.5-2 yearsExpensive for the 2019 model
Repair with an unoriginal display5 000โ€“7 000Budget, fast.Marriage risk, worse image quality
Selling a broken one + buy up to the Redmi Note 1210 000โ€“12 000New phone with guaranteeWe'll have to reconfigure everything from scratch.
Buy Redmi Note 10 instead of repairs8 000โ€“10 000Better camera, processor, NFCRisk of hidden defects

โš ๏ธ Note: If you plan to sell a refurbished Redmi Note 8, consider that with a non-original display, its price in the secondary market will fall by 30-40.

How to replace the display on Redmi Note 8 yourself: Step-by-step instructions

Replacing the display alone will save 1,500โ€“3,000 โ‚ฝ You're going to need some precision and tools:

Screen suction cup|Plastic blades (0.2โ€“0.4 mm)|Screwdriver. T3 and T5|Hair dryer|New display module|Double-sided scotch (3M or similar)|Alcohol to clean contacts-->

Step-by-step process:

  1. Turn off the phone and remove it. SIM-map.
  2. Heat the edges of the screen with a hair dryer (60โ€“70ยฐC) for 2-3 minutes to soften the glue.
  3. Put a suction cup on the screen and carefully separate it with a plastic spatula. Start at the bottom edge.
  4. Disconnect the battery and display plumes (they are fixed by latches).
  5. Remove the old module and clean the frame from glue residues with alcohol.
  6. Install a new display, connect the plumes and check the operability before the final gluing!
  7. Apply a new glue (or double-sided scotch) and press the screen.

Critical moments:

  • ๐Ÿ”‹ Donโ€™t tear off the battery plume when the phone is on โ€“ this can burn the board.
  • ๐Ÿ”ฅ Do not overheat the screen โ€“ the matrix can damage at temperatures above 80ยฐC.
  • ๐Ÿงฒ Donโ€™t use metal tools โ€“ they can close your contacts.

If the screen does not work after replacement:

  1. Check if the plumes are tight.
  2. Clean the contacts with alcohol and blow with compressed air.
  3. Try restarting your phone in Fastboot (clamp Power). + Turning down the volume).
What to do if the new screen is not turned on?
1. Make sure the plumes are connected correctly (the display module has tags). CON1 and CON2). 2. Check if the contacts on the board are bent (a frequent problem with careless repairs). 3. Connect the phone to charging - sometimes an initial recharging is required to activate the new display. 4. If nothing helps, the board may be damaged (diagnosis is required in the service).

Frequent Display Replacement Mistakes and How to Avoid Them

Even experienced craftsmen sometimes make mistakes that lead to additional costs.

  • ๐Ÿ”Œ Damage to the battery plume - if it is torn off, repair will cost +2 000 โ‚ฝ.
  • ๐Ÿ”Š So, if you rip off the speaker or the microphone, they're glued to the display frame, so you can gently push the screen on the side, not on the top.
  • ๐Ÿ“ถ Loss of tightness - if you do not replace the glue, dust will be clogged under the screen.
  • ๐Ÿ”„ Firmware incompatibility โ€“ some non-original displays require firmware reflashing EDL-fashion.

To avoid problems:

  1. Use a thermoplatform instead of a hair dryer - it warms up the glue evenly.
  2. Before gluing, check all the functions: sensor, camera, speaker, microphone.
  3. If stripes or artifacts appear after the replacement, try updating the firmware through the Mi Flash Tool.

โš ๏ธ Warning: If you've never repaired phones, it's best not to take risks - the Redmi Note 8 has a fragile fee and careless handling can lead to a short circuit.The service charges 1,500-2,500 replacements. โ‚ฝ, But it is cheaper than repairing a burned motherboard (from 5 000). โ‚ฝ).

FAQ: Answers to Frequent Questions About Replacing the Redmi Note 8 Display

Can you replace the glass, not the entire display?
Technically, but it's not feasible. Cost of glass replacement (1,500-2,500) โ‚ฝ) It's comparable to the price of a non-original display, and the risk of damaging the matrix when disassembling is very high, except if you have access to a laminator (glass and matrix gluing equipment), but only large services offer such services.
How long does it take to replace the display in the service?
In most workshops, repairs take 1-2 hours if the part is available. If you need to order a display, the time is increased to 1-3 days. When you replace it yourself, it takes 3-5 hours for beginners (including heating, cleaning and testing).
Why does the battery quickly go down after replacing the display?
This is a problem with non-original arrays, which are often higher in power consumption because of poor-quality backlight drivers. Solutions: Reduce the brightness of the screen to 60-70%. Turn on Battery mode. โ†’ Energy saving: Update your firmware with the Mi Flash Tool (sometimes it helps) if it doesn't work, you'll have to change the display to the original or a better non-original (e.g., if it doesn't work, BOE).
Where to find the connection circuit for the Redmi Note 8?
The official scheme can be downloaded on the Xiaomi website in the Support section โ†’ Redmi Note 8 โ†’ Service Manuals. There are also useful materials on the forums: 4PDA (iFixit (disassembly with photo) Attention: AliExpress sells "schemes" with errors - it is better to use proven sources.
Can I return my phone under warranty if the screen is cracked?
No, mechanical damage (including a cracked screen) is not a warranty case, but if the display fails without external influences (for example, stripes appear or the backlight flashes), it can be a matrix defect - in this case, the repair is free. To confirm the defect, the service center will conduct a diagnosis (cost 500-1000) โ‚ฝ, The money will be returned if the defect is confirmed).