Xiaomi Mi A2 Lite (codenamed daisy) remains a popular budget smartphone even 6 years after its release, but over time, the device’s screen can fail: cracks from falls, broken pixels, sensor or backlight problems. If you are faced with such a problem, the first question is how much it costs to replace the display and where to perform it with a guarantee of quality.
In this article, we will discuss:
- 💰 Current prices for original and copies of displays (compared by regions of Russia and the CIS).
- 🔧 Cost of work in service centers vs self-substitution.
- ⚠️ Typical risks when buying cheap modules (sensor detachment, calibration problems).
- 🛠️ A step-by-step guide for those who decide to change the screen themselves.
Important: prices in this article are relevant for the first half of 2026; market fluctuations (dollar rate, logistics) can affect the cost of components.
1. Display types for Mi A2 Lite: Original vs Copy
There are three categories of screens for Xiaomi Mi A2 Lite:
- Original (OEM) — They're made from new or used smartphones in the factory, they're factory-marked, they're fully compatible with hardware and software.
- Premium-class copies - type manufacturers BOE Or Tianma, they're going to make modules under a Xiaomi license, which is close to the original, but it's 30 to 50 lower%.
- Cheap replicas are Chinese non-neume producers, often suffering from poor color reproduction, uneven lighting and multi-touch problems.
How do you tell the original? Notice that:
- 🔍 Marking on the plume (must be the Xiaomi logo and serial number).
- 📦 Packaging: Originals come in sealed antistatic hologram bags.
- 🔧 Set: the set should be a screwdriver, suckers and adhesive tape for fixation.
⚠️ Attention: Cheap copies often go without oleophobic coating, which leads to rapid scratches and greasy marks on the screen after 1-2 months of use.
According to user reviews, the most common problems with non-original displays:
- 🎨 Distorted color reproduction (predominance of cold tones).
- ☀️ Uneven lighting (dark spots in the corners).
- 👆 Poor sensor sensitivity (touch skip, "ghost" pressings).
2. Display prices for Mi A2 Lite in 2026
The cost of the module depends on the type, region of purchase and delivery method, and below is a comparative table of prices for new screen modules (excluding replacement work):
| Type of display | Price (Russia, rub.) | Price (Ukraine, UAH.) | Price (Kazakhstan, tenge) | Where to buy |
|---|---|---|---|---|
| Original (OEM) | 5 500 – 7 200 | 2 800 – 3 700 | 28 000 – 35 000 | Official services, AliExpress (verified sellers) |
| Premium copy (BOE/Tianma) | 3 200 – 4 500 | 1 600 – 2 300 | 16 000 – 22 000 | AliExpress, local parts stores |
| Remark (non-neume) | 1 800 – 2 800 | 900 – 1 500 | 9 000 – 14 000 | AliExpress, Radio Detail Markets |
| B/o original | 2 500 – 4 000 | 1 300 – 2 000 | 12 000 – 20 000 | Avito, OLX, Telegram |
Important: prices for used originals can vary greatly depending on the condition. Before buying, ask the seller for a photo of the screen from different angles and a video with a multi-touch test (for example, through the Touch Screen Test application).
Where is it better to buy?
- 🌍 AliExpress is 20 to 30 percent cheaper, but it takes 2 to 4 weeks to ship.Recommended sellers: Xiaomi Original Store, Digi-Flash Official Store.
- 🏬 Local shops are faster, but more expensive. In Moscow and St. Petersburg, check the Communication Service, TechnoDoctor.
⚠️ Note: When buying on AliExpress, pay attention to the reviews with photos/video. Often sellers will specify "original", but send copies. Use the filter "Orders with reviews" and look for references to the daisy model.
3. Cost of replacement of the display in service centers
If you don't plan to change the screen yourself, you'll have to pay for a wizard's job, and the prices vary depending on the region and the status of the service:
| Type of service | Cost of work (ruble) | Time limit for implementation | Guarantee |
|---|---|---|---|
| Official Xiaomi service | 3 500 – 5 000 | 1-3 days | 6–12 months |
| Authorized partner | 2 500 – 4 000 | 1-2 days | 3–6 months |
| Local workshop | 1 500 – 3 000 | 2-4 hours | 1–3 months (or not) |
| Garage-makers | 1 000 – 2 000 | 1-2 hours | No. |
What's included in the cost of the job?
- 🔧 Disassembly of the smartphone and dismantling the old screen.
- 🧲 Integrity check of plumes and contacts.
- 🔄 Installation of a new display with sensor calibration.
- 🔍 Testing for broken pixels and multi-touch.
- 🛡️ Sealing of the shell (if required).
Xiaomi official centers give a warranty of up to a year, but also take 30-50% more expensive; Local workshops are cheaper, but the risk of unqualified repairs is higher; Authorized partners (for example, Communication Service or iService) are the best option.
💡
Before handing over the phone for repair, make a backup copy of the data through Settings. → System system → Backup: Replacing the screen sometimes requires a factory reset, which will result in file loss.
4. Self-replacement of the display: step-by-step instructions
If you decide to save money and change the screen yourself, prepare:
- 🔧 Screwdrivers (Phillips #00, Pentalobe) P2).
- 🧲 Screen-take-down suction cups.
- 🔥 Hair dryer or thermo-air station (for softening glue).
- 📱 New display (check the complete set!).
- 🧴 Isopropyl alcohol (for cleaning contacts).
Replacement process:
- Turn off the phone and remove it. SIM-map.
- Heat the screen edge with a hair dryer (~60°C) for 2-3 minutes.
- Carefully suction the display and separate it from the body.
- Unscrew the screws that lock the plumes and disconnect them.
- Set a new screen, connect the plumes and fix with screws.
- Check the performance (sensor, light, camera).
- Apply a new glue around the perimeter and press the screen.
Make a data backup|Buy an original or premium copy of the screen|Prepare tools (screwdrivers, suckers, hair dryer)|Working on a clean, illuminated surface|Turn off the phone from charging-->
Typical Beginner Mistakes:
- 🔥 Overheating of the body with a hairdryer (may damage the battery).
- 🔧 Breaking the plume with careless screen removal.
- 💧 Dust falling under the new display (will lead to spots on the screen).
- 📶 Incorrect connection of plumes (sensor does not work).
What if the screen does not respond to touch after replacement?
5. Frequent problems after replacement of the display and their solution
Even if the replacement is successful, there may be problems.
| Problem. | Possible cause | Decision |
|---|---|---|
| The screen flickers or spontaneously goes out | Poor contact of the backlight plume | Disassemble the phone and reconnect the plume |
| Sensor is working with a delay | Incorrect calibration or cheap copy of the screen | Update the firmware or replace the display with a quality one |
| Colors distorted (greenish/blueish hue) | Unoriginal matrix with poor color reproduction | Set up a color profile in Settings → Screen. → Colors or screen replacement |
| There's broken pixels. | Matrix marriage or mechanical damage during installation | Contact the seller under warranty or replace the display |
If the screen is not showing colors well after the replacement, try calibrating it through the engineering menu:
- Enter the ##6484## number in the dialer.
- Choose the Manual Test → Display.
- Take tests for color reproduction and contrast.
- If necessary, reset the screen settings to the factory.
⚠️ Note: If after replacing the display, the phone stopped turning on, most likely damaged the power plume or battery!
6.Where to buy a display for the Mi A2 Lite with a guarantee
To avoid cheating, buy parts from trusted sellers.
- 🌐 AliExpress – Look for stores rated 98%+ Examples: Xiaomi Original Store (originals and premium copies), Digi-Flash Official Store (warranty 1 year).
- 🏪 Local shops: Moscow: TechnoShock, Mobile.ru. St. Petersburg: GadgetMarket, RepontTechno. Regions: Svyaznoy, MTS Service.
When buying, specify:
- 🔄 Is it possible to return during marriage.
💡
Before you buy, ask the seller for the display serial number and check it against the original Xiaomi parts database.
7. Display replacement alternatives: when repairs are impractical
Replacement of the screen with Mi A2 Lite costs 5,000-10,000 rubles (with work). If the phone is already outdated or has other problems, it may be cheaper to buy a new one:
- 📱 Buying used Mi A2 Lite is in good condition on Avito or OLX You can find it for 6000-9000 rubles.
When repairs are not warranted:
- 🔋 Battery worn out (capacity) < 60% of the original).
- 📶 Problems with the communication module (network does not catch, poor Wi-Fi).
- 🖥️ Strong lags due to weak processor (Snapdragon 625).
- 💸 The cost of repairs exceeds 50% of the price of a new budget smartphone (for example, Redmi). 12C POCO C50).
If you still decide to sell the phone, honestly indicate in the ad:
- 📱 Screen state (cracks, broken pixels).
- 🔋 Battery lifetime.
- 📶 The efficiency of cameras, speakers, microphones.