How to Wash a Xiaomi Vacuum: Complete Care Guide for Mi, Dreame and Roborock

Xiaomi vacuum cleaners are not just cleaning techniques, but real assistants in the fight against dust and dirt, but for them to last long and remain effective, you need regular maintenance. Cleaning a vacuum cleaner is not only about cleaning the container, it's also about properly handling filters, brushes and other components that directly affect suction power and quality of operation. Many users make mistakes: washing. HEPA-filters under running water, dry parts in the microwave or ignore cleaning the turbobrush, leading to breakage or reduced productivity.

In this article, we will discuss how to properly wash a Xiaomi vacuum cleaner (including Mi Robot Vacuum, Dreame and Roborock models), which parts can be washed and which can only be wiped, and how to avoid typical errors. Also, you will learn which detergents are safe for the equipment and which can spoil it. If you want your vacuum cleaner to work like a new one, read on - there are no general tips, only proven instructions with regard to the peculiarities of Xiaomi equipment.

———

What parts of the vacuum cleaner Xiaomi can and can not be washed

Not all parts of Xiaomi vacuum cleaner can be wet-cleaned, HEPA-Most models only clean the filter as a last resort, which is recommended to be vacuumed or blown with compressed air, but the dust container, the pre-motor filter and some brushes can be washed underwater, but with the rules.

Here is a list of the components that most often require cleaning:

• 🧹 Garbage container - washed under running water with soft detergent.
• 🌀 Cyclone filter (if any) – washed with water, but not all models allow it (see instructions).
• 🔄 Premotor filter – can be washed, but only with full drying.
• 🧼 Turbobrush and nozzles - cleaned from hair and thread, washed with severe pollution.
• ❌ HEPA-filter – 90% of the time you can’t wash (only vacuum or replace).
• ⚡ Electronic components – wiped with a dry cloth or a wet wipe without alcohol.

It is important to consider the model of the vacuum cleaner. For example, in Xiaomi Mi Robot Vacuum-Mop 2 there is a washable filter, and in Dreame V12 there is only a removable one. Always check the user manual before washing.

⚠️ If a carbon filter is installed in the vacuum cleaner (for example, in models with aromatization function), it can not be wet - only replaced every 3-6 months.

———

Step-by-step: how to wash the container and filters

The garbage container and removable filters are the parts that get polluted the fastest, and are recommended to be cleaned after every 3-5 use (or more often if the vacuum cleaner is used to clean the fur of animals).

1. Turn off the vacuum cleaner from the network and take out the battery (if it is removable).
2. Remove the container – it is usually fixed by a latch or a release button.
3. Remove the garbage in the urn, then rinse the container with warm water (no higher than 40 ° C).
4. For severe contaminants, use a mild detergent (for example, dishware) or vinegar solution (1: 1 with water).
5. Wash the premotor filter (if it is washable) under a stream of water, gently rub your fingers.
6. Dry all the details for at least 24 hours in the air (not in the oven, not a hairdryer!).

Paper towels can be used to speed up drying, but don’t rub the parts too hard – this can damage sealing gums.

Turn off the vacuum cleaner from the socket

Remove the battery (if possible)

Check if the filter is washed (see the instructions)

Do not use aggressive detergents

Drying parts for at least 24 hours-->

———

How to clean the turbobrush and nozzles from hair and threads

The turbobrush is the most problematic part of the vacuum cleaner, especially if you have pets in the house, and the hair and threads are wound on the shaft, block the rotation, and can cause the engine to overheat, and you need to clean it every 1-2 cleanings.

Cleaning instructions:

1. Remove the brush from the vacuum cleaner (usually there is a button or latch).
2. With scissors or tweezers, remove large accumulations of hair.
3. For hard-to-reach places, use a toothpick or plastic spatula.
4. If the brush is heavily contaminated, wash it underwater, but do not wet the bearings!
5. Wash the shaft with an alcohol wipe for disinfection (do not use acetone!).

For models with a washable brush (for example, Dreame T30), you can use a soap solution, but after that be sure to lubricate the shaft with silicone lubrication (it comes with a kit or is purchased separately).

💡

If your hair is very entangled, put the brush in a bag with a solution of vinegar (1: 1) for 10-15 minutes - this will make it easier to clean.

———

What can and can not wash the vacuum cleaner Xiaomi

Not all detergents are safe for plastic and rubber vacuum parts, such as chlorine or abrasive powders, which can break down seals and cause metal parts to corrosion.

Hydrogen peroxide (3%) can be used to disinfect, but only for plastic parts, which kill bacteria and leave no odor, but do not wash the parts in the dishwasher, because high temperatures deform the plastic.

———

How often should you wash the Xiaomi vacuum cleaner?

The frequency of cleaning depends on the intensity of use and type of cleaning.

• 🏠 Garbage container – after each use (or every 2-3 times cleaning).
• 🌀 Cyclone filter - once every 1-2 weeks (if washable).
• 🔄 Premotor filter – once a month (or more often if the vacuum cleaner is used daily).
• 🧹 Turbobrush – every 1-2 cleanings (if the house animals – after each cleaning).
• 🚫 HEPA-Replace the filter every 6-12 months (do not wash!).

If the vacuum cleaner is used for wet cleaning (for example, Xiaomi Mi Mop 2 Pro), then the water tank and nozzle must be washed after each use, otherwise mold will appear.

Once a week.

Once a month

Only when it's clogged.

Never wash.-->

———

Typical mistakes when washing a Xiaomi vacuum cleaner

Many users unknowingly ruin their vacuum cleaners by following "internet advice," and here are the most common mistakes and their consequences:

1. Washing HEPA-water-filter → filter loses properties, the vacuum cleaner begins to suck worse.
2. Drying parts with a hair dryer or in a microwave → plastic is deformed, the rubber bands crack.
3. Use of rigid brushes → The internal surfaces of the container are scratched.
4. Cleaning the vacuum cleaner included in the socket → the risk of short circuit.
5. Replacement of filters with unoriginal → deterioration of filtration, overheating of the engine.

Another common problem is incomplete drying, and if you put a vacuum cleaner with wet parts, it creates mold inside, and the electronic components can oxidize. The minimum drying time is 24 hours, but it's not really good. HEPA-filters (if they are washed) are better to withstand 48 hours.

⚠️ Warning: If the vacuum cleaner becomes worse after washing or there is a strange noise, check if the filters are installed correctly.

———

Features of care for Xiaomi robot vacuum cleaners (Mi Robot, Roborock)

Xiaomi’s robot vacuum cleaners (such as the Roborock S7 or Mi Robot Vacuum-Mop 2 Lite) require more delicate maintenance, which cannot be disassembled completely, but some parts still need to be cleaned regularly:

• 🤖 The main brush is to clean the hair once in 2-3 cleanings.
• 🌀 Side brushes – check for debris every week.
• 💧 Water reservoir (if any) – wash after each wet cleaning.
• 🔋 Contacts of the charging station - wipe with a dry cloth once a month.
• 🚫 Sensors and camera – only dry cleaning with microfibre!

For robotic vacuum cleaners with floor washing function (Roborock S7 MaxV), it is important to use only distilled water or special cleaning products for robots. Conventional tap water can leave a plaque on the nozzle.

———

FAQ: Frequent questions about washing Xiaomi vacuum cleaners