Full instructions for cleaning the vacuum cleaner Xiaomi: from filters to brushes

Xiaomi vacuum cleaners are smart equipment that requires regular maintenance to maintain high cleaning efficiency. Many users face the problem of reducing the suction power, unpleasant smell or overheating of the device. Most often, these problems are caused by contamination of filters, dust collectors or brushes. In this article, we will discuss how to properly clean the Xiaomi vacuum cleaner (including popular models Mi Robot Vacuum, Mi Handheld Vacuum and Dreame) so that it works as a new one.

Whether you're using a robot vacuum cleaner or a vertical model, the principles of care remain the same, and the key is to keep cleaning periodic and use the right methods, such as washing. HEPA-The filter under running water can spoil it, and improper drying of the dust container will lead to mold. Next you will find unique recommendations for the care of every part of the vacuum cleaner, which the manufacturer does not always specify in the instructions.

1.When and how often to clean the Xiaomi vacuum cleaner

The cleaning frequency depends on the intensity of the device. For example, if you clean a house with pets every day, the dust collector and filters require attention every 1-2 cleanings. For standard use (2-3 times a week), it is enough to clean a full cleaning once a month.

• 🗑️ Dust container – after each cleaning or when filled at 80%
• 🌀 Cyclone filter - once every 1-2 weeks
• 🧹 Brushes and turbobrush - once in 3-5 cleanings (or in the presence of wound hair)
• 🔄 HEPA-filter - once every 1-3 months (depending on the model)
• 🔋 Ventilation holes - once every 6 months

Signs that the vacuum cleaner urgently needs cleaning:

• ⚠️ Reduced suction power (dust remains on the floor)
• 🔥 The device overheats or automatically shuts down
• 👃 There is an unpleasant smell during work.
• 🔊 Noise levels are increasing.

⚠️ Note: If the vacuum cleaner Xiaomi Dreame V10 Or Mi Handheld Vacuum is making a whistling sound, which is a sign of clogging the air channel!

2. Step-by-step instructions: how to clean the dust container

The container is the first line of protection against clogging, and if it's not cleaned in time, it gets into the filters and the engine, which shortens the life of the vacuum cleaner.

1. Disconnect the vacuum cleaner from the network (if it is a network model) or remove the battery (for wireless versions).
2. Press the container opening button (usually marked with an icon) 🗑️ or OPEN).
3. Remove the container and remove the sealing gum (if any).Rinse the gum with warm water and soap to remove the adhesive dust.
4. Throw the trash in the urn. Don't dust off the toilet, it could clog the sewers!
5. Wash the container under warm water. Use dishwashing agent to remove greasy stains. Don't use abrasive sponges, they scratch the plastic.
6. Dry the container thoroughly in the air (at least 24 hours) and do not dry with a hair dryer or on a battery, which can deform the plastic.

For models with cyclone systems (e.g. Dreame) V11 Mi Handheld Vacuum Cleaner G10) Check the cyclone filter inside the container, which can be washed with water, but only if the instructions allow it (some models only have a filter for dry cleaning).

3. Cleaning the filters: HEPA, cyclone

Filters are light vacuum cleaners, and clogging them causes power loss and overheating. Xiaomi vacuum cleaners typically have:

• 🔄 Cyclone filter (primary air cleaning from large debris)
• 🧼 Pre-filter (retains medium particles)
• 🩹 HEPA-filter (fine cleaning, traps allergens and microdust)

Instructions for cleaning each type:

Pay special attention HEPA-In most Xiaomi models (e.g. Mi Robot Vacuum-Mop 2), it is not washable. Use a soft brush or vacuum cleaner at minimum power to clean it. If the filter is damaged or deformed, replace it because it loses its properties.

⚠️ Attention: In Dreame vacuum cleaners T30 Xiaomi Mi Handheld Vacuum Cleaner HEPA-filter WASHABLE (If there is no such inscription, you can not wash the filter!

4. Cleaning brushes and turbobrushes: remove hair and thread

The brushes are the fastest polluting element in a vacuum cleaner, and the hair, thread and fur of the animals are wound onto the rollers, which leads to a decrease in the efficiency of cleaning.

• ✂️ Scissors or cutters
• 🧲 Tweezers or needles
• 🧽 Wet wipe.

Step-by-step:

1. Remove the brush from the vacuum cleaner (press the button) RELEASE or pull up).
2. Remove visible lumps of dirt with your hands.
3. With scissors, carefully cut the wound hair along the roller. Don't pull the strings - this can damage the brush.
4. Remove the remaining hairs from the bearings and slits with a tweezer.
5. Wipe your brush with a wet wipe. Use alcohol (not higher than 70%) to disinfect.
6. Check the mobility of the roller, it should rotate freely. If the brush creaks, lubricate the bearings with silicone grease.

For turbo brushes (for example, in Dreame) V12) If the belt is broken or stretched, replace it. Also, pay attention to the side brushes of the robot vacuum cleaner: they need to be cleaned of hair every 3-5 harvests.

💡

If the brush is heavily contaminated with fat (for example, after cleaning the kitchen), soak it in a solution of water and dishwashing products for 10 minutes.

Cleaning of ventilation and engine openings

Clogged vents are one of the main causes of overheating in the vacuum cleaner, and in Xiaomi models, they are located on the body (usually at the back or on the sides).

1. Turn off the vacuum cleaner and let it cool (if it worked).
2. Take a thin brush (such as a toothbrush) or compressed air (a balloon).
3. Carefully remove dust from the grilles. Don't use sharp objects - they can damage the fan blades.
4. Vacuum the holes at minimum power.

If the vacuum cleaner automatically shuts down after 5-10 minutes of operation, this may indicate:

• 🔥 Clogging of the air channel (check hose and tubes)
• 💨 Engine malfunction (diagnosis required)
• 🔋 Battery problems (for wireless models)

⚠️ Note: If the Xiaomi Mi Robot Vacuum vacuum cleaner still overheats after cleaning the ventilation, check the temperature sensor. In some cases, it is required to calibrate through the Mi Home application (Settings section). → Additionally. → Sensor reset).

6. Battery care (for wireless models)

The Xiaomi Dreame or Mi Handheld portable vacuum cleaners use a lithium-ion battery that requires careful care to extend its lifespan:

• 🔋 Do not drain the battery completely (optimal charge level is 20–80%).
• ⚡ Use only the original charger.
• 🌡️ Do not leave the vacuum cleaner on charging for more than 24 hours.
• 🔄 Calibrate once every 3 months: completely discharge and charge the battery.

If the vacuum cleaner began to discharge quickly, check:

1. The state of the charging contacts (clean them with a cotton swab dipped in alcohol).
2. Battery temperature during operation (it should not be heated above 40)°C).
3. Battery life (if it is reduced by 30% or more – the battery needs to be replaced).

💡

Never store a vacuum cleaner with a fully discharged battery! this leads to deep discharge and battery failure.

Disinfection and elimination of odors

If a Xiaomi vacuum cleaner has an unpleasant odor, it means that bacteria or mold have accumulated inside.

1. Wash the dust container and filters with a solution of water and vinegar (1:1) or a special antibacterial agent.
2. Dry all the details in the sun (UV light kills bacteria).
3. Place a bag of activated carbon or baking soda in the container for 12 hours.
4. For robot vacuum cleaners (Mi Robot Vacuum), wipe your brushes and wheels with alcohol.

To prevent the appearance of the smell:

• 🗑️ Do not leave garbage in the container for long.
• 🌿 Use aromatic pellets for vacuum cleaners (for example, with a citrus smell).
• ☀️ Keep the vacuum cleaner in a dry, ventilated place.

8.Frequent mistakes when cleaning Xiaomi vacuum cleaner

Many users inadvertently spoil their vacuum cleaners by following the advice of the people.

• 🚫 Wash HEPA-If the filter is not washable, it destroys its structure.
• 🚫 Use a vacuum cleaner without filters - dust enters the engine.
• 🚫 Clean brushes with a knife or scissors "by eye"** - you can damage the roller.
• 🚫 Dry parts in the microwave or oven – plastic deforms.
• 🚫 Ignore Mi Home errors (e.g., Error 10 often means clogging).

Also avoid the use of aggressive detergents (such as Domestos or Whiteness) - they corrode plastic and rubber seals.

💡

If after cleaning the vacuum cleaner Xiaomi still does not suck well, check the tightness of the system.

FAQ: Answers to Frequent Questions