Why Xiaomi Smartphone Turns On and Off: A Complete Analysis of Causes and Solutions

Your Xiaomi has become a “ghost”: it suddenly turns off out of the blue, then spontaneously turns on in the middle of the night? This problem is familiar to many owners of smartphones of the brand – from budget Redmi to flagship Mi or POCO. The reasons for this behavior can lie in hardware (battery, power button) and software failures (firmware, viruses, conflicting applications).

In this article, we have systematized all possible causes of Xiaomi’s spontaneous reboots, from the most obvious (battery dead) to the rare (motherboard damage). You will learn how to diagnose the problem yourself, what measures to take first, and when to contact the service center. MIUI, These are often the source of unstable work.

1.Battery problems: the main culprit

In 60 percent of cases, Xiaomi’s spontaneous shutdowns are due to battery failure, which can be both physical wear (blown, loss of capacity) and software errors in charge control.

• 🔋 The phone turns off at 20-30% charge, although the indicator shows a normal level.
• 🌡️ The body heats up in the battery area even with minimal load.
• ⚡ Charging is jerky: it quickly gains interest, then freezes».
• 📉 In settings (Settings) → Battery → Battery condition) capacity shows a value below 80% of the factory.

If any of these things match, the battery is almost certainly the problem.

1. Remove the back cover (if the model is collapsible, for example, the Redmi Note 8 Pro) and inspect the battery for bloating.
2. Connect the phone to charge and move the cable – if the charging indicator flashes, it’s in the contacts of the battery or connector.
3. Install the AccuBattery app (available on Google Play) and check the actual capacity and discharge current.

⚠️ Warning: If the battery is swollen, turn off the phone immediately and do not use it until the battery is replaced.

Failure of the power button or plume

The Power button is the second most popular source of problems, and over time, its contacts become oxidized, the mechanism wears out, or the plume that connects the button to the motherboard departs.

• 🔘 The phone turns on/off with or without a button.
• 🔄 The button “sticks” – you have to press several times to work.
• 📱 The screen goes out and turns on when the phone changes position (for example, when you put it in your pocket).

How to check:

1. Tap the Power button carefully – if the phone is responding, the problem is the mechanics.
2. Try to turn your phone on by holding the "Loud up + Power" button (Fastboot mode). If this mode is stable, the firmware or software is to blame, not the button.
3. Take the phone apart (if you have experience) and check if the button plume is moving away from the board.

💡

If the power button doesn’t work at all, but the phone is switched on from charging – use the adb reboot command via your computer to restart.

3. MIUI firmware failures: software glitches

MIUI firmware is known for its features, which sometimes turn into bugs.

• 🤖 Errors in the system core (especially after air updates»).
• 📲 Conflicting applications (most often launchers, optimizers or Chinese utilities).
• 🔄 Cyclical reboot due to a failure in the service miui.guardprovider (characteristic of Redmi) 9/Note 9).
• 📡 Incorrect power saving settings that force the phone to turn off.

Diagnosis:

1. Run your phone in Safe Mode (hold Power → Long tap on Turn Off → Reboot Safe Mode) If the reboots stop, the third-party app is to blame.
2. Check the error logs through Settings → About Phone → MIUI version (tap 5 times according to version, then go to Additional settings → Logs).
3. Turn off automatic optimization in Settings → Battery → Settings → Battery Optimization.

4. overheating of the processor or other components

Xiaomi (especially models with Snapdragon 7xx/8xx processors) are prone to overheating, which leads to an emergency shutdown. Normal operating temperature is up to 45 °C, critical is considered to be 60 °C and above.

• 🔥 Games or heavy apps (e.g., Genshin Impact at maximum settings).
• ☀️ Direct sunlight or hot weather.
• 🖥️ Background processes, such as mining viruses or system updates.
• 🧊 Failure of the cooling system (thermopaste has detached, the radiator has clogged).

How to check the temperature:

1. Install the AIDA64 or CPU Monitor app.
2. Run a stress test of the processor (in AIDA64: Tests → Stress test).
3. If the temperature exceeds 70°C, cool the phone immediately (not in the refrigerator!).

⚠️ Warning: If the phone turns off at temperatures below 60°C is a sign of a malfunction of the temperature sensor or motherboard.

Disable mobile data and Wi-Fi | Close all background applications |Remove case |Put phone in the shadow |Reboot device-->

5. Application conflict or viruses

Third-party applications are a common cause of instability, especially dangerous:

• 🛡️ Antiviruses and optimizers (e.g. Clean Master, DU Speed Booster).
• 🎮 Game cheats or modified APK.
• 📊 Applications for overclocking the processor (for example, SetCPU).
• 🕵️ Spyware (can be installed via phishing links).

How to find the culprit:

1. Launch your phone in Safe Mode (see the firmware section).
2. Check the list of recently installed apps in Settings → Apps → Application Management.
3. Use Malwarebytes or Dr.Web Light to scan for viruses.
4. Sort applications by battery consumption (Settings → Battery → Battery use) – the culprit often ends up in the top.

If you find a suspicious application, delete it and clear the cache. For reliability, reset to factory settings (Settings → Additional → Recovery and Reset).

6 Damage to the motherboard or other components

If all previous methods did not help, the problem may be in the hardware:

• 🔌 Short circuit on board (often after falling or getting moisture).
• 🔧 Failure of the power controller (e.g., chip) PMIC).
• 📶 Problems with antenna module (may cause reboots when calling).
• 💾 Memory damage (if the phone turns off when writing files).

Signs of hardware malfunction:

• The phone does not turn on without a connected charge.
• Artifacts (strips, flickering) appear on the screen before turning off.
• Reboots are accompanied by a characteristic crack in the dynamics.
• Fastboot or Recovery will not be launched.

⚠️ Warning: If the phone has fallen into water or been hit hard - don't try to repair it yourself! corrosion on the board can cause irreversible damage if the wrong drying is done.

💡

Hardware malfunctions almost always require professional diagnosis, and self-repair without experience can lead to a complete failure of the phone.

7. Problems with charger or cable

Poor chargers or damaged cables can cause power surges that force the phone to restart.

• ⚡ Use of left-handed charging (especially with power output above 18W for models that do not support fast charging).
• 🔌 Damaged cables (furnished insulation, bare wires).
• 🔋 Charging through USB-Hubs or low-quality power bank.
• 🔄 The phone is turned off when connecting / disabling charging.

How to check:

1. Try charging your phone with the original cable and power supply.
2. Connect the charger to another device – if it also behaves unstable, the problem is charging.
3. Check the USB-C connector on your phone for contamination or damage to your contacts.

If the phone only turns off when charging, it's probably the power controller on the board that's to blame, and then only repairs will help.

What do you do if nothing helps?

If you’ve tried all the methods, but Xiaomi still turns on and off, there are two options left:

1. Hand-flash your phone via Fastboot: Download the official firmware for your model from Xiaomi. Use the Mi Flash Tool utility (instructions are available on 4PDA). Select clean all mode for full cleanup.
2. Contact the service center: Official Xiaomi services are in most major cities (list on the Mi Service website). The cost of diagnosis is from 500 to 1500 rubles, the repair of the fee is from 3000 rubles. If the phone is warranty - repair will be free (provided that there are no traces of opening).

Before the service visit:

• Make a backup of the data (Settings → Additional → Backup).
• Write down the phone's IMEI (printed on the box or seen in *#06#).
• Check if the service has original parts for your model.

💡

If the phone is warranty, don't open it yourself! It voids the warranty.

FAQ: Frequent questions about Xiaomi's spontaneous reboots