Why the remote from the TV Xiaomi Mi does not work TV: complete diagnosis and solution

You picked up the remote from Xiaomi Mi TV, You press the switch on, and the TV is silent like a fish on the ice, or worse, the remote responds once, the buttons are delayed, and some features are ignored altogether. In 90% of cases, the problem is solved independently in 10–30 minutes.

In this article, we will discuss all the possible reasons why the Xiaomi Mi remote is TV (including the Mi models TV 4A/4S/4X/5/5X/Q1/Q2/P1) It can be down from the banal (discharged batteries) to the exotic (Bluetooth module firmware failure), you will receive step-by-step instructions with photos, video examples and checklists, and you will also learn when it is really time to go for repairs.

Important: If your Xiaomi TV doesn’t respond to any remotes (including the original and third-party), the problem is most likely in the TV itself – go straight to the section about the malfunction of the TV.

1.Batteries: Why even new ones might be to blame

The first thing that comes to mind is to replace the batteries, but even here, there are pitfalls, and even fresh batteries can cause a remote control to fail if:

• 🔋 Batteries from different manufacturers or with different charge levels are installed (the difference in voltage blocks work).
• 🔌 Contacts in the compartment of the remote are oxidized or contaminated (especially important for wet rooms).
• 🔄 Batteries are inserted incorrectly (plus / minus mixed up) - yes, this happens even with experienced users.
• 📉 Use cheap alkaline batteries with low discharge current (Xiaomi remotes are sensitive to this).

How to check:

1. Remove the batteries and inspect the contacts in the compartment - if there is a green coating, clean it with a blower or alcohol.
2. Try adding new batteries from another brand (preferably lithium batteries like Duracell or Energizer).
3. If the remote is infrared (IR), point it to the camera of the smartphone and press any button – the working remote will flash purple light (not visible to the eye, but the camera will catch you).

Attention! If the remote is running after replacing the batteries, but after a day or two it stopped responding again, the problem is short circuit inside the housing, most often the spilled liquid or mechanical damage to the board.

2. The remote type: IR, Bluetooth or RF — How to determine and do

Xiaomi Mi remotes TV There are three types, and each has its own disease»:

How to find out the type of your remote:

1. Look at the box or the instruction manual, which usually shows the protocol.
2. The Bluetooth remote has a Pair button (sometimes hidden under the battery compartment cover).
3. If the remote works through the wall, it is RF.
4. If you want to be on TV, that’s it. IR.

For Bluetooth remotes, make sure to check if your pairing settings are reset after you update your TV. MIUI TV.

3.Pairing problems: how to reconnect the Bluetooth remote

If your Xiaomi Mi remote is TV He uses Bluetooth, but he doesn't respond to the press, and he probably unplugs the TV:

• 🔄 TV firmware updates.
• 🔋 Full battery packs.
• 📵 Resetting TV settings to factory.
• 📱 Connections of other Bluetooth devices (earphones, gamepad).

Reconnection instructions:

1. Turn on the TV with a button on the case (if the remote does not work at all).
2. Go to Settings → Devices → Bluetooth.
3. Remove the current remote from the list of associated devices (if there is one).
4. Press the Pair button on the remote (or BT) 5-10 seconds until the indicator flashes.
5. In the TV menu, select the Mi Remote Controller that appears and confirm the pairing.

If the remote does not appear on the list:

• 🔌 Restart the TV (Settings) → On TV. → Reboot).
• 📱 Make sure there are no other active Bluetooth devices nearby (they may interfere with your Bluetooth device).
• 🔋 Try to bring the remote as close to the TV as possible (at a distance of 10-20 cm).

Attention! Some Xiaomi Mi models TV Q1/Q2 After resetting the settings, you need to manually activate the pairing mode through the service menu:

Click on the remote: Menu → Settings → All Settings → General → Remote Control → Add Remote

4.Television problems: when it's not the remote control's fault

If you've tried all the ways, but the remote still doesn't work, the problem may be in the TV itself.

• 📺 The IR receiver is defective (for IR-remotes – physical damage or contamination.
• 📡 Failure Bluetooth/RF-module - after updating or surge of voltage.
• 🔌 Locking the remote in settings (for example, enabled "Mode for children»).
• 🖥️ Port clogging – dust or debris in connectors.

How to diagnose:

1. Check the IR receiver, point your smartphone camera at it, and press the button on the remote, and if the receiver is working, you'll see a flicker.
2. Test with another remote: try connecting the remote from another Xiaomi Mi TV Or a universal remote (for example, from Xiaomi Mi Remote).
3. Resetting: If the TV responds to buttons on the case but not the remote, try resetting to factory settings (Settings) → On TV. → Reset).

If the TV does not respond to any remote control, but is turned on by a button on the body:

• 🔧 Check if the Hotel Mode is activated (disabled in the service menu).
• 📶 Update the TV firmware manually (download the file from the official website and install via USB).
• 🛠️ If nothing helps, the motherboard is a problem (repair is required).

💡

If you want a Xiaomi Mi TV TV 4S If you don't respond to the remote after the update, try rolling back the firmware to the previous version. 4PDA and install it through the Restore Menu (Settings) → On TV. → Update of the PO → Local Update).

5 Mechanical damage: what breaks in the remotes Xiaomi

Xiaomi remotes are not very durable – especially models with touch buttons (Mi). TV Stick Remote, or a thin plastic case, and these are the typical diseases»:

• 💧 Fluids – even a small amount of moisture can cause contacts to corrosion.
• 🪨 Cracks on the board - after a fall or strong pressing.
• 🔘 Wear buttons – frequently used keys (volume, channels) are particularly affected).
• 🔋 The collapse of the contacts of the battery - due to deformation of the body.

How to fix it yourself:

1. Disassemble the remote: gently tuck the latches with a plastic card (do not use metal objects!).
2. Clear the board: If there is oxidation, wipe the contacts with alcohol or a special liquid to clean the electronics.
3. Check the buttons: If the rubber contacts are worn out, they can be temporarily “resuscitated” with foil or conductive glue.
4. Replace the battery compartment: if the contacts fall off, they can be soldered back (a soldering iron is required).

If the remote is completely dead (the indicator does not burn, does not respond to charging):

• 🔌 Check the fuse on the board (can burn when the voltage jumps).
• 🔋 Make sure the battery (if built-in) is not swelling.
• 🛠️ If the board is visually damaged, it is easier to buy a new remote control.

💡

If the Xiaomi Mi remote is TV If you fall into water, you can only save it if you react quickly: remove the batteries immediately, dry with a dryer (without heating!), and rinse the board with alcohol. In 2-3 days, corrosion will make repairs impossible.

6. firmware failures: when TV's to blame

One of the most insidious reasons is software bugs in firmware MIUI TV. They can manifest themselves in different ways:

• 🖱️ The remote works, but not all buttons (e.g., no volume control or Netflix opens).
• 🔄 The remote is periodically disconnected and requires re-conjugation.
• 📵 TV doesn't see remote after update.

How to fix it:

1. Update the firmware: go to Settings → On TV. → Update the software and check the relevance of the version.
2. Reset Bluetooth settings: Remove all associated devices and reconnect the remote again.
3. Reverse to the old firmware: if bugs appeared after the update, download the previous version from the Xiaomi website and install it through the app. USB.

For Mi models TV 5 Pro and newer:

• 🔧 Check if the Bluetooth Energy Saving function is activated (Settings) → Network and devices → Energy conservation).
• 📡 If the Laggit remote (press delays), turn off Adaptive Brightness – it sometimes conflicts with the Bluetooth module.

Attention! Some Xiaomi TVs automatically block third-party remotes from resetting to factory settings.

Hold on the remote: Menu + Home + Back (simultaneously) for 10 seconds.

7. Alternative solutions: what to do while you fix the remote

If the main remote is not working, and the TV needs to be turned on urgently, use one of these methods:

• 📱 Mi Remote app: download the official Mi Remote app (Android/iOS) Connect to TV via Wi-Fi or Bluetooth.
• 🖱️ Mouse or keyboard: connect USB-Mouse to TV – it will work like a remote control.
• 🎮 Gamepad: If you have Xiaomi Game Controller or Sony DualShock, it can be connected via Bluetooth.
• 🔌 Buttons on the case: on the back of the TV there are buttons Power, Volume and Source.

How to set up Mi Remote:

1. Download the app from Google Play or the App Store.
2. Select the type of device - TV → Xiaomi.
3. Follow the instructions on the interface screen.

If the app does not find the TV:

• 📶 Make sure your TV and smartphone are connected to the same Wi-Fi network.
• 🔄 Restart the TV and smartphone.
• 📵 Turn on Bluetooth on both devices.

💡

If you have an Amazon Fire TV Stick or Android TV Box connected to Xiaomi Mi TV, You can use the console to control the TV through HDMI-CEC (included in the settings of TV: Settings → HDMI-CEC → On.).

8. when it is time to carry for repair (or buy a new remote)

Not all breakdowns can be repaired on their own, but here are some signs that the remote (or TV) needs professional repair:

• 🔥 The board of the remote has blackened or swelled capacitors - a sign of short circuit.
• 📵 The TV does not respond to any remote, including the original and the app.
• 🔌 After the fall, the remote stopped turning on (a crack in the chip is possible).
• 🖥️ Artifacts appear on the TV screen when you press the remote buttons (a problem with the motherboard).

Cost of repair:

Where to buy a new remote:

• 🛒 Xiaomi’s official store – original remotes, but more expensive.
• 🌍 AliExpress – Cheaper but Long to Wait (Look for 98-rated sellers%+).
• 🏬 M-Video, Citilinch, DNS — frequently.
• 🔧 Service centers – sometimes sell used remotes after repair.

Attention, when you buy a new remote, check that it's compatible with a TV model, like the Mi remote. TV 4A Not good for Mi. TV Q1 due to different communication protocols.

💡

If the TV is guaranteed, do not disassemble the remote yourself - this will void the warranty.

Frequently asked questions