Why Xiaomi smartphone is very hot: we analyze all the reasons and ways of solving

Contents

  • Introduction: Norm or problem?
  • Hardware causes of overheating
  • Programmatic factors of heating
  • How to check the temperature of the processor
  • Practical solutions for cooling
  • When overheating is dangerous for the device
  • Features of heating in different models Xiaomi
  • Frequent questions about overheating

Xiaomi smartphones have long proven to be reliable devices with excellent price-performance ratio, but many users face the problem of high heat, especially during games, charging or heavy use of the camera. But how do you know where the line between normal operation of the processor and dangerous overheating? And most importantly, what to do about it?

In this article, weโ€™ll look at all the possible reasons why your Xiaomi might be basking like an iron: from the banal wear of the battery to the hidden viruses in the system. You will learn how to diagnose the problem yourself, what measures will help to reduce the temperature, and in which cases it is better to immediately contact the service center. Separately, we will dwell on the features of popular models - from budget Redmi to flagship Xiaomi 13/14.

Spoiler: 80 percent of the time, overheating isn't caused by a breakdown, it's caused by a wrong setting or an external condition, but there are critical situations where delay threatens to cause the motherboard to fail. Let's get this straight.

๐Ÿ“Š Your Xiaomi is hotter than most people.
Games.
Charging.
Camera work
Just in my pocket.
Friendly.

Hardware causes of overheating: from the battery to the processor

If your Xiaomi smartphone is getting hotter than usual, itโ€™s worth checking the hardware.

  • ๐Ÿ”‹ A worn-out battery is the most common cause. 300-500 In charging cycles, the battery capacity drops and the internal resistance rises, which leads to heating.
  • ๐Ÿ–ฅ๏ธ CPU overload โ€“ modern Snapdragon and Mediatek chips in Xiaomi have high TDP (With prolonged loads (games, video rendering), the temperature can reach 60-70ยฐC.
  • ๐Ÿ“ฑ Poor heat sink โ€“ Redmi budget models often save on thermal paste and copper tubes, which leads to โ€œlockingโ€ heat inside the case.
  • ๐ŸŒก๏ธ External conditions - using a smartphone in direct sunlight or in hot climates exacerbates the problem.Ambient temperatures above 35ยฐC's already critical.
  • ๐Ÿ”Œ Faulty charging unit โ€“ Cheap or damaged power adapters can deliver unstable voltage, causing the charging controller to overheat.

Especially vulnerable to overheating models with a plastic case โ€” it is worse heat dissipation than metal or glass. POCO X3 The Pros are often affected by this. But the flagships of the Xiaomi 13 series have an improved cooling system with a steam chamber, but they are not immune to problems under extreme loads.

โš ๏ธ Note: If the smartphone body heats up unevenly (for example, only in one corner), this may indicate detachment of the graphics chip or problems with soldering of elements on the motherboard.

Xiaomi modelTypical load temperatureMaximum permissible temperatureFrequent causes of overheating
Redmi Note 12 Pro+45-55ยฐC65ยฐCWeak heat sink, 200 MP intensive chamber
POCO F550-60ยฐC70ยฐCSnapdragon 7 chip+ Gen 2, games with high settings
Xiaomi 13 Ultra40-50ยฐC60ยฐCMulti-core processor, 4K-display
Redmi 10A55-65ยฐC75ยฐCBudget cooling system, weak Helio chip G25

Software Factors: Why Xiaomi is warming up for no apparent reason

Overheating is not always hardware-related, and software is often to blame, from background processes to malware.

  • ๐Ÿค– Background processes MIUI โ€” Xiaomi shell is known for its "gluttony." Even in standby mode, the system can keep up to 50 processes active, which loads the processor.
  • ๐Ÿฆ  Viruses and Mining Bots โ€“ If your smartphone is warming for no apparent reason, check it for malware.
  • ๐Ÿ”„ Auto-updates โ€“ background loading of system or application updates can create peak loads, especially on low-end models with slow eMMC memory.
  • ๐ŸŽฎ Unoptimized games โ€“ many mobile games (such as Genshin Impact or Call of Duty Mobile) do not have normal optimization for Mediatek chips, resulting in 100% downloads. CPU.
  • ๐Ÿ“ฑ Failures in firmware - after a failed update MIUI Resource leakages may occur when the processor is constantly running at high frequencies.

One of the most insidious bugs is the sensor problem, where if the temperature sensor fails, the system can misjudge heating and not reduce performance in time, which leads to thermal trottling (forced reduction of the processor frequencies), but at critical temperatures.

How do you check? Go to the settings. โ†’ The phone. โ†’ Version. MIUI And you can tap the "kernel version" multiple times, and if you see a Hardware info menu, you can see the current temperature of the processor and the battery.ยฐC is a warning sign.

๐Ÿ’ก

If the smartphone started to warm up after the update MIUI, Try to retrace the previous version via Fastboot. 4PDA for your model.

How to accurately measure the temperature of Xiaomi processor

Before you take action, you need to understand how serious the problem is. Normal temperature values for Xiaomi smartphones:

  • ๐Ÿ“ฑ In plain: 30-40ยฐC
  • ๐ŸŽฎ In games: 45-60ยฐC
  • ๐Ÿ”‹ During charging: 35-50ยฐC
  • ๐Ÿ“ธ When filming video 4K: 50-65ยฐC

If the values exceed these values by 10ยฐC and more - it's time to sound the alarm.

Methods of temperature check:

  1. Built-in tools MIUI: Settings โ†’ The phone. โ†’ All characteristics โ†’ Battery status: Here is the battery temperature, but not the processor.
  2. Secret Engineering Menu: ##4636## Under Battery Information, you can see the temperature of the device. It doesn't work on all models.
  3. Third-party annexes: CPU Monitor โ€“ shows the temperature of the processor cores in real time. AIDA64 โ€” AccuBattery - monitors the temperature of the battery and its wear and tear.

Important: if the processor temperature exceeds 70ยฐC, and the batteries are 50.ยฐC, the smartphone will automatically shut down to prevent damage.This is a protective mechanism, but frequent emergency shutdowns shorten battery life.

What to do if the engineering menu does not open?
Some Xiaomi models have blocked access to the engineering menu. ADB-command: adb shell dumpsys battery In the output, look for the temperature string (value in tenths of a degree).

10 Ways to Reduce Heat from Xiaomi

If the diagnosis showed an elevated temperature, here are proven methods of solving the problem:

โ˜‘๏ธ The first steps in overheating

Done: 0 / 4

1. Software optimization

  • ๐Ÿงน Cache Clearing: Go to Settings โ†’ Memory. โ†’ Clear the cache, it'll free up until 1-3 GB space and reduce the load on the processor.
  • โš™๏ธ Disabling Autostart: In Settings โ†’ Annexes โ†’ Auto-Start Control Disable Unnecessary Programs.
  • ๐Ÿ”„ Update MIUI: Sometimes overheating is fixed in new firmware versions. Check the updates in Settings โ†’ The phone. โ†’ Updating the system.

Hardware solutions

  • ๐Ÿ”‹ Battery replacement: If the battery is swollen or its capacity has fallen below 70%, it is better to replace it in the service.The cost for Xiaomi is from 1500 to 4000 rubles.
  • ๐ŸงŠ Use of cooling accessories: Fans stands or gel cushions reduce the temperature by 5-10ยฐC. Popular models: Baseus Cooler or Black Shark FunCooler.
  • โ˜€๏ธ Avoid direct sunlight: Do not leave your smartphone on the dashboard of your car or on the windowsill. within 20 minutes, the temperature can rise to 50.ยฐC.

3. Settings for gamers

If your smartphone is warm during games:

  • ๐ŸŽฎ Reduce the graphical settings in the game to "Mediocre" or "Low".
  • ๐Ÿ”‡ Enable Game Turbo mode in Settings โ†’ Special facilities โ†’ Game mode.
  • โฑ๏ธ Limit it. FPS up to 60 frames / s (in the game schedule settings).

โš ๏ธ Warning: Do not use the refrigerator or ice for quick cooling! A sharp temperature drop can cause condensation inside the case, which will lead to a short circuit. 10-15 minute.

๐Ÿ’ก

If after all the manipulations the smartphone continues to warm above 60ยฐC in plain is a 100% hardware problem. Contact the service immediately to avoid damage to the motherboard.

When Xiaomi becomes dangerous: symptoms and risks

Not every heating is critical, but there are signs that indicate serious problems:

  • ๐Ÿ”ฅ Self-resetting at temperatures above 70ยฐC - alarm signal for emergency protection.
  • ๐Ÿ“‰ Sharp drop in performance (lag when opening applications) โ€“ the processor forcibly reduces frequencies due to overheating (thermal throttling).
  • ๐Ÿ”‹ Battery bloating โ€“ if the smartphone case began to โ€œpullโ€, and the screen rose, immediately turn off the device!
  • ๐Ÿ’ฅ The appearance of artifacts on the screen (colored stripes, flickering) - may indicate overheating of the graphics chip.
  • ๐Ÿšจ The smell of burning is the most dangerous sign, and it indicates damage to the components on the motherboard.

Consequences of ignoring overheating:

Temperature.Time of exposurePossible damage
50-60ยฐC1-2 hoursAccelerated battery wear (loss) 10-15% container)
60-70ยฐC30+ minuteThermopaste detachment, memory chip degradation
70-80ยฐC10+ minuteDamage to the motherboard, failure of the power controller
80ยฐC+5+ minuteIrreversible damage CPU/GPU, fire-risk

Smartphones with type memory are especially vulnerable to overheating UFS 2.1/2.2 โ€” At high temperatures, it starts to lose data, and if you notice that photos or files are corrupted, it could be due to overheating of the drive.

Features of overheating in different models Xiaomi

Not all Xiaomi smartphones heat up the same way. Here's what you need to know about the popular series:

๐Ÿ“ฑ Budget models (Redmi) 9/10/11, POCO M/X)

Main problems:

  • Weak cooling system (no copper tubes).
  • Budget processors (Helio) G88, Snapdragon 680 poorly optimized for heavy duty.
  • Cheap eMMC memory is warmed by intense reading/writing.

Solution: Donโ€™t load these models with type games PUBG Use lightweight shells like Nova Launcher instead of the standard shell. MIUI.

๐ŸŽฎ Smartphones (Black Shark, POCO F)

Paradox: devices sharpened for games often suffer from overheating due to:

  • High-performance chips (Snapdragon) 8 Gen 1/2).
  • Active cooling (fans in Black Shark require dust cleaning).
  • The "Performance" mode, which accelerates the processor to the maximum.

Tip: Use branded cases with additional radiators and limit FPS games up to 90 frames/sec.

๐Ÿ“ธ Flagships (Xiaomi) 12/13/14, Mix)

The main hot spots:

  • Camera (especially when shooting video in the video) 8K).
  • Wireless charging (heats the back panel).
  • Snapdragon processors 8 Gen 2/3 high-end TDP.

Solution: Enable Battery and Performance mode in settings MIUI and limit background activity.

๐Ÿ’ก

For models with Snapdragon 888/8 Gen 1 (for example, Xiaomi 11T) It is recommended to disable the Enhanced processing function in the developer settings. 5-10%, but will reduce the heat by 15-20ยฐC.

Frequent questions about Xiaomi overheating

โ“ Why Xiaomi is warming up even in a simple (screen is off)?
Probable reasons: Background data synchronization (check Settings) โ†’ Accounts. Virus or mining bot (scan Malwarebytes). Temperature sensor malfunction (diagnosis required). First thing you do is reboot your smartphone in Safe Mode (press the power button). โ†’"Restart in Safe Mode. If the heating is gone, one of the installed applications is to blame.
โ“ Can you use Xiaomi at 60?ยฐC?
Short term (until now) 10 Yes, but not recommended: At 60ยฐC the battery is degraded into 2 The processor is running at lower frequencies (performance drops by a fraction of the time). 30-40%). Risk of screen damage (OLED-If the temperature is kept at this level longer 15 minutes - immediately cool the device.
โ“ Why Xiaomi is warming up when charging?
It's okay, but there are boundaries: ๐Ÿ”‹ Fast charging (30W+) Heats the power controller. Temperature to 45ยฐC - normal. ๐Ÿ”Œ Cheap cable or adapter can cause overheating due to high resistance. ๐Ÿ“ฑ Using during charging (games, video) increases the heat 20-30%. Solution: Charge your smartphone in Power mode โ†’ Optimized charging and remove the case.
โ“ Which case is better to prevent overheating?
Avoid: ๐Ÿงฆ Thick silicone cases (deteriorate heat sink). ๐Ÿ›ก๏ธ Metal cases (can create a "greenhouse effect: ๐ŸงŠ Aluminum radiator covers (e.g. Ringke Fusion-X). ๐Ÿ•ณ๏ธ Perforated covers with ventilation holes. ๐Ÿƒ Breathable materials (e.g. Spigen Thin Fit).
โ“ Should you use cooling stands for Xiaomi?
Yes, but with reservations: โœ… Fan stands (such as Black Shark FunCooler Pro) reduce the temperature of the air. 10-15ยฐC in games. โŒ Do not use liquid-cooled stands โ€“ they can leak and damage your smartphone. โš ๏ธ Don't direct the airflow directly at the speakers - it can damage them.Best models for Xiaomi: Model Cooling Type Temperature Reduction Price Baseus Cooler Fan (3000 min) 8-12ยฐC 1500-2000 โ‚ฝ Black Shark FunCooler 2 Fan + heat-tube 12-15ยฐC 2500-3000 โ‚ฝ IPEGA PG-0017 Passive (aluminum radiator) 5-8ยฐC 800-1200 โ‚ฝ