Have you noticed that your Xiaomi screen is left with blurred contours of icons, keyboards or logos even after they have disappeared? AMOLED-And it can appear on both new and old models. Unlike broken pixels, which look like colored dots, the residual image appears as barely visible shadows of previous images, especially visible against a monochromatic background.
In this article, we will explain why this happens (spoiler: not only are they to blame). AMOLED-How to distinguish time trace from irreversible burnout, and what to do in each case.You will learn which Xiaomi models are most susceptible to the problem (Redmi Note 10 Pro, POCO F3, Mi 11 Ultra is at risk! and how to prevent the situation from getting worse. And if the screen is already burned, we will give a checklist of actions that will return the display to working condition.
Why is there a trace of the image on Xiaomi’s screen?
The causes of residual image are divided into hardware (related to physical wear matrix) and software (software or drivers).
1. Burnout. AMOLED-screen (burn-in)
AMOLED-matrixes (used in Xiaomi 12/13 series, POCO F4/F5, Redmi K50) over time lose the brightness of pixels, which often display static elements: navigation panel, battery icons, MIUI logo. This is an irreversible process, but it can be slowed down. Especially vulnerable smartphones with Always-On Display (AOD) – the function accelerates the wear of pixels by 2-3 times.
2. image hanging on IPS-screen
Even budget Xiaomi with IPS-displays (Redmi) 9A, POCO M3) They may show residual traces, but it's not physical wear that's to blame, but a malfunction of the screen controller or graphics driver. Often, the problem disappears after you reboot or reset the settings.
3. Software glitch
- 🔄 Mistakes. MIUI: After the update, the firmware (especially on the MIUI 14) artifacts may arise due to conflict of graphic libraries.
- 🎮 Games and heavy applications: overheating of the processor (Snapdragon) 8 Gen 1/2) This causes failures in image rendering.
- 🔋 Energy savings: Aggressive battery settings in Settings → Battery limits productivity GPU, what causes lags and shadows".
Critical fact: On AMOLED-Residual image can become permanent after 1.5-2 years of active use with the included image AOD. Nana IPS-The displays are almost always a temporary glitch.
How do you check if it is temporary or burnout?
Before you panic, do a simple test:
- Open a white background (such as a blank page in your browser or notes).
- Look at the screen from a 30-45° angle, and the residual traces on AMOLED will be visible as gray outlines.
- Run the burnout test using the Screen Test app (available on Google Play).
Results:
| Symptoms. | AMOLED (burn-in) | IPS (Glue P) |
|---|---|---|
| Traces are visible only on a colored background | ❌ No. | ✅ Yes. |
| The outlines are visible from any angle | ✅ Yes. | ❌ No. |
| Disappears after rebooting | ❌ No. | ✅ Yes. |
| Appears after 1-2 hours of use | ✅ Yes. | ❌ No. |
💡
If the traces disappear 5-10 minutes after the change of the image, it is a temporary effect of "afterimage" (post-image), not burn-in.
7 Ways to Remove Residual Images on Xiaomi
Depending on the cause, solutions range from simple reboot to screen calibration. Start with the safest methods.
1.Reboot and cache reset
More than 60% of the residual images on IPS-The screens are solved by a banal reboot. If it doesn't work, clear the cache:
Settings → Applications → Application Management → [Three dots] → Show system → Media Storage → Storage → Clear cache2. disable Always-On Display (AOD)
For AMOLED-smartphones (Xiaomi) 13T, POCO F5 Pro):
Settings → Screen → Always-on Display →💡
AOD shorten AMOLED-Turning off this feature is the best burn-in prevention.
3.Calibration of the screen through the engineering menu
⚠️ Attention: Incorrect settings in the engineering menu can cause the display to break.
- Open the Phone app and dial ##3644633##.
- Go to CIT → Display → Screen Burn-in Test.
- Press Start and wait until it is completed (5-10 minutes).
4. Firmware update
In MIUI 14.0.5+, Xiaomi has added burnout compensation algorithms for AMOLED.
Settings → About phone → System update → Check for updates5.Use of applications to "treat" burn-in
Programs like Screen Burn-In Fixer or AMOLED Burn-In Test help to disperse stagnant pixels with antipode colors. Efficiency: ~40% for mild burnout.
6.Reset to factory settings
If the problem is caused by a software failure, a complete reset can help.
Settings → About the phone → Reset settings → Erase all data7. Contact the service centre
If the traces remain after all manipulations, and the screen AMOLED — It's probably irreversible burnout, and it requires a replacement of the display module: ~12 000 ₽, For the Redmi Note 11 Pro: ~6 000 ₽.
Checked for traces on white background | AOD turned off for 24 hours | Calibration performed via engineering menu | Updated firmware to the latest version |Data backup made-->
How to prevent residual image on Xiaomi?
Prevention is particularly important for AMOLED-Smartphones. Follow these rules:
- ⏳ Limit your time. AOD: Only turn on when necessary (e.g. in meetings).
- 🔄 Change Wallpaper: Use dynamic wallpaper or change it every 2-3 months.
- 📱 Turn off autobrightness: Manual brightness settings of 60-70% reduces pixel load.
- 🎮 Use dark themes: In Settings → Screen. → Dark subject.
- ⚡ Avoid overheating: Do not play heavy games when charging.
Myths about burn-in
Frequent mistakes of users when fighting burn-in
Many actions that seem logical actually make the problem worse.
⚠️ Warning: Never use a screen burner for more than 10 minutes in a row, which can lead to the opposite effect – accelerated wear of pixels.
- 🚫 Ignoring updates: In new versions MIUI Often patches are added to compensate for burn-in.
- 🚫 Frequent change of wallpaper with high contrast: sharp transitions from dark to light pictures accelerate degradation AMOLED.
- 🚫 Use of non-original chargers: Unstable voltage damages the screen controller.
Another common mistake is to reset your settings without a backup. Before any manipulation, save your data to the Mi Cloud or to your PC via the Mi PC Suite.
Xiaomi models for burn-in resistance comparison
Not all Xiaomi smartphones are equally burnout-prone, and we analyzed service center data and user reviews for 2023:
| Model | Screen type | Risk of burn-in (1–10) | Notes |
|---|---|---|---|
| Xiaomi 13 Ultra | AMOLED, 2K | 7 | High risk due to the brightness of 1900 nits, but there is hardware compensation burn-in. |
| POCO F5 Pro | AMOLED, 120Hz | 6 | It is sensitive to AOD, but cheaper to repair. |
| Redmi Note 12 Pro+ | AMOLED, 120Hz | 5 | Medium risk, good optimization in MIUI 14. |
| Xiaomi 12 Lite | AMOLED, 90 Hz. | 4 | Less bright screen = more slowly fade out. |
| Redmi 10C | IPS LCD | 1 | Burn-in is virtually eliminated, but software glitches are possible. |
💡
Smartphones with LTPO AMOLED (Xiaomi 13 Pro, Mix Fold 2) have a dynamic refresh rate, which reduces the risk of burnout by 30-40%.