Wherever NFC Xiaomi Redmi Note 8 Pro: Chip location, check and setup

Xiaomi Redmi Note 8 Pro is still one of the most popular models among budget smartphones, but the question of the availability and location NFC-The problem is that the official specifications of the model vary depending on the region of sales, and this creates problems for users who want to use contactless payments or other features based on Near Field Communication.

In this article, we will not only show you where you are physically located. NFC-The module in Redmi Note 8 Pro (if it is in your version), but we will also understand how to check its availability software, why some devices are deprived of this feature, and what to do if the chip is, but does not work. You will also learn about the hidden features of the module – from emulating transport maps to automating tasks through Mi Home.

Spoiler: if you bought a smartphone in Russia, Ukraine or most CIS countries, most likely, NFC Your device is missing hardware, but there are ways to check this without disassembling the case. Read on, so you don't waste time on useless settings.

1. Is there any? NFC Redmi Note 8 Pro: official data and regional differences

The first thing to understand: Xiaomi Redmi Note 8 Pro was produced in several versions, and the presence of the NFC-The chip depends on the region of sales and the firmware version. NFC Global version (Global) with designation only M1906G7G and some Asian markets (e.g. Indonesia) Models for Russia, Ukraine and CIS countries (M1906G7E) Most often, they were delivered without a module.

Here are the key points:

• 🌍 Global version (M1906G7G): NFC It is present in most cases, but not guaranteed (depending on the party).
• 🇷🇺 Russian/CIS version (M1906G7E): NFC missing from 99% of devices.
• 🇮🇩 Indonesia/Asia (M1906G7I): NFC It is, but it can be disabled by software.
• 📦 Cloned/grey devices: NFC It may not even be in the "global" model.

To find out for sure if there is NFC In your Redmi Note 8 Pro, it's not enough to look at the box or sticker -- you need to check with hardware and software.

⚠️ Note: Some vendors indicate the characteristics NFC For all versions of the Redmi Note 8 Pro, but this is not true. IMEI or serial number.

2 How to check for availability NFC Redmi Note 8 Pro without disassembly

If you don’t want to disassemble a smartphone, there are several ways to check if you have a smartphone. NFC-So let's start with the simplest one:

Method 1: Verification through Android settings

Open the Settings. → Connected devices → Connection in preferred way. If there's a item on the list "NFC", But even if it's there, it can be hidden, so you can move on to the next method.

Method 2: Using an engineering menu

Enter the code in the phone application:

##4636##

Go to the phone information section and find the line "NFC". If it's there, the chip's installed. If it's not, it's not physically in the device.

Method 3: Verification through applications

Install one of these apps from Google Play:

• 📱 NFC Tools (shows the chip and its status).
• 🔍 CPU-Z (In the "Sensors" section, you can see NFC-module).
• 💳 Google Pay (when you try to add a card, you will get an error if you want to add a card). NFC absent).

If all three methods show no NFC, If you can't get it activated any further, you don't have to have a chip, and if you can get at least one method that's confirmed to be there, but it doesn't work, you can read the setup section.

3. Where physically located NFC-chip in Redmi Note 8 Pro

If you're convinced that NFC Your device has one, but it doesn't work, and it may be a problem with the physical damage to the chip or antenna. NFC is located on the motherboard, next to the battery connector, and connected to a small antenna that runs along the upper part of the body.

Precise location:

• 📍 Chip. NFC: on the back of the motherboard, under the screen, next to the camera plume connector.
• 📶 antenna NFC: glued under the back cover, along the upper edge (near the speaker).

To get to the chip, you'll need:

1. Remove the back cover (glued, you need a plastic shoulder blade or hair dryer).
2. Disconnect the battery (required!).
3. Remove the metal screen from the motherboard.

Visually. NFC-The chip looks like a small black square (size) ~3×3 mm) marked NXP PN54T If the chip is missing from the board, then your version of the smartphone really doesn't support it. NFC.

⚠️ Warning: Disassembling a smartphone without experience can lead to damage to plumes or antenna tearing NFC. If you are not sure about your skills, contact the service center, and remember that self-disassembly removes the warranty (if it is still valid).

4. Why. NFC It may not work even if you have a chip.

Let’s say you’ve checked all the ways and made sure that NFC-There is a chip in your Redmi Note 8 Pro, but the feature is not activated:

• 🔄 Disabled in firmware: Xiaomi sometimes blocks NFC programmatically.
• 📱 Outdated Firmware: In Early Versions MIUI NFC could have been unstable.
• 🔌 Antenna Damaged: Frequent problem after falls or disassembly.
• 🛠️ Conflict with other modules: For example, after changing the screen or battery.
• 🔒 Google Pay restrictions: In some countries, the service does not support Google Pay NFC Xiaomi.

The most common solutions are:

1. Update the firmware to the latest version MIUI (through settings → The phone. → Updating the system).
2. Reset network settings (Settings) → System system → Additionally. → Resetting the network).
3. Check the integrity of the antenna (if you have taken the phone apart).
4. Install an alternative launcher (sometimes helps with software locks).

If nothing worked, maybe, NFC It's disabled at the vendor firmware level, and then you can only flash it through Fastboot or call the service.

💡

Before updating the firmware, make a backup of the data through Settings → Additionally. → Backups: This will help you avoid losing photos and contacts.

5. How to turn on and configure NFC On the Redmi Note 8 Pro

If NFC Your device is running and it's running, and you have to set it up correctly:

Step 1: Activation NFC customized

Go to: Settings → Connected devices → NFC

Turn on the switch "NFC" and (optional) Android Beam (for file transfer).

Step 2: Set up contactless payments

For Google Pay:

1. Install the Google Pay app from the Play Market.
2. Add a bank card (Mastercard, Visa, Mir depending on the bank are supported).
3. Bring the phone to the terminal – payment must be made without entering a PIN code (up to 1000).₽).

For Mi Pay (alternative from Xiaomi):

• 💳 Open the Mi Pay application (pre-installed in the MIUI).
• 🔐 Link the card and confirm through SMS.
• 📱 Enable the option "Pay by default" in the settings NFC.

Step 3: Additional functions NFC

Besides payments, NFC The Redmi Note 8 Pro can be used for:

• 🚇 Emulations of transport cards (for example, "Troika" or "Arrow" through applications such as Metro) NFC).
• 🔑 Smart device management (opening doors, turning on lights through Mi Home).
• 📲 Quickly transfer contacts/photos to other phones NFC (via Android Beam).

⚠️ Attention: When in use NFC For payments, disable the option "Unlock when you bring to the terminal" in the security settings. This will prevent accidental debits if the phone is in your pocket near the terminal.

💡

NFC Redmi Note 8 Pro only works when the screen is unlocked (except for payments up to 1000).₽ Google Pay).

Alternatives NFC Redmi Note 8 Pro without a chip

If the Redmi Note 8 Pro version does not support NFC, Don’t despair – there are a few ways to get around this limitation:

1. Contactless payments through QR-code

Apps like SberPay, Tinkoff Pay or Alipay allow you to pay for purchases by scanning the app. QR-Minus: You need to unlock the phone and open the app.

External NFC-tags and adapters

Can I buy it?

• 💳 NFC-sticker (glued on the back cover, emulates the card).
• 📱 USB-C NFC-adapter (connected to the charging connector).
• 🔌 Bluetooth terminal (to accept payments if you are a seller).

The cost of such solutions is from 300 to 1500₽. Main disadvantage: external adapters are less convenient than built-in NFC, and may conflict with covers.

3. Data exchange via Wi-Fi Direct or Bluetooth

To transfer files between phones instead of Android Beam, you can use:

• 📤 Wi-Fi Direct (in Wi-Fi settings).
• 🔵 Bluetooth 5.0 (faster than older versions).
• 🌐 Local area network (applications like Send Anywhere).

Of course, it's not a complete replacement. NFC, But it covers most scenarios.

7. Frequent errors and their solutions

Let’s look at the typical problems with NFC Redmi Note 8 Pro and how to eliminate them:

If none of these methods worked, try resetting your phone to factory settings (Settings) → System system → Reset settings. Be sure to back up the data before doing so!

FAQ: Answers to Frequent Questions