Xiaomi phone does not turn on – the inscription “Fastboot” burns: reasons and solutions

You turned on a Xiaomi smartphone, but instead of the usual logo on the screen appeared the word Fastboot — and the device hung, POCO or Mi, especially after a failed upgrade, reset or battery discharge.Fastboot mode (aka bootloader) is an engineering tool for firmware and system recovery, but users usually accidentally get into it.

In this article, we will explore all possible causes of freeze on the Fastboot screen, from the banal discharge of the battery to critical firmware errors, you will learn how to exit the mode without losing data, restore the phone to work and avoid repeated crashes. Instructions are suitable for all Xiaomi models, including the Redmi Note 10/11/12, POCO X3/X4/X5, Mi 11/12/13 others.

If the phone doesn't respond to buttons, doesn't charge, or reboots in a cycle in Fastboot, don't panic. In 90% of cases, you can solve the problem yourself without going to the service center, the main thing is to correctly diagnose the cause and follow proven algorithms.

What is Fastboot Mode and Why Does Xiaomi Phone Get Into It?

Fastboot mode (or fastboot mode) is a low-level tool for interacting with a smartphone bootloader.

• 🔄 Firmware or flashing of the device through the PC;
• 🔧 Unlock bootloader (for example, to install custom firmware);
• 🛠️ System Recovery After Failures;
• 📱 Installations of modified kernels or recavérie (TWRP).

Normally, the user will never see the Fastboot screen — the phone boots directly into the system. But if the Xiaomi smartphone is getting stuck on this screen, then there was a failure at one of the boot stages.

• ⚡ Battery discharge up to 0% followed by incorrect inclusion;
• 🔄 Failed Software Update (interrupted or error-prone);
• 🗑️ Resetting settings via Recovery that interrupted;
• 🛠️ Damage to system files (for example, after manual removal of applications);
• 🔌 Hardware problems: malfunction of the power button, damage to the charging connector.

It is important to distinguish Fastboot from other download modes:

If your phone is defined by your computer as an Android Bootloader Interface device, it confirms that it is in Fastboot mode, not in Fastboot mode. EDL.

Next Next post: What to do if Xiaomi is stuck on Fastboot

Before you start complex manipulations, follow the basic steps that often solve the problem:

Press the power button on 20-30 second-on-second forced reboot|

Connect the charger and wait. 15-20 minutes (even if the indicator does not burn)|

Try to pinch the combination Loudness up + 10 seconds power.|

Shut down all cables (USB, headphones and remove SIM-memory-card

-->

If your phone is responsive to buttons but doesn’t leave Fastboot, try:

1. Press and hold the power button. 10-15 seconds until the screen goes out.
2. Immediately after turning off, press the Volume down + Power – This Can Transfer Your Phone to Recovery.
3. From the Recovery menu, select Reboot → Reboot to System.

If the smartphone doesn’t respond to buttons or returns cyclically to Fastboot, the reason could be:

• 🔋 Battery discharge (even if the indicator does not show charging);
• 🔌 Faulty cable/charging (try the original power supply);
• 🛠️ Damaged connector USB-C (Check for dirt or oxidation).

First time |

2-3 time-consuming|

Regularly (once a month and more often)|

I never did, but I want to know how to do it.

-->

⚠️ Note: If a Xiaomi phone hits the Fastboot after falling, hitting or getting moisture, don’t try to sew it in. Check for hardware damage (such as a bloated battery or oxidized contacts) First, the firmware in this case can aggravate the problem.

How to exit Fastboot without a computer (means for beginners)

Not everyone has a PC with drivers and firmware installed on hand, and luckily there are ways to exit Fastboot without a computer, unless the crash is critical:

Method 1: Forced resetting

The simplest method that works in 30-40% case:

1. Press the power button on 20-30 seconds until the screen goes out.
2. Release the button and wait 1-2 minutes.
3. Press the power button again for normal download.

If the phone hits the Fastboot again, repeat the action. 2-3 Sometimes the system “wakes up” after a few reboots.

Method 2: Going to Recovery and resetting the cache

If the forced reboot didn’t help, try clearing the cache through Recovery:

1. Turn off the phone (press the power button for 20 seconds).
2. Press the combination Volume up + Eating and holding on 10-15 A few seconds before the Recovery Menu appears.
3. Select Wipe & Reset from the menu → Wipe Cache (use volume buttons for navigation, power to confirm).
4. After cleaning the cache, select Reboot → Reboot to System.

💡

If the Recovery menu is in Chinese, focus on icons: trash bin icon (🗑️) — It's a cache dump, arrow in circles (🔄) — restart.

Method 3: Reset to factory settings (if other methods didn’t work)

If the phone is back in Fastboot and only Wipe Data is available in Recovery, you will have to reset your settings, which will delete all data (photos, contacts, apps) but will return the functionality:

1. From the Recovery menu, select Wipe Data → Wipe All Data.
2. Confirm the action (usually you need to enter Yes or press the power button).
3. After reset, select Reboot to System.

⚠️ Note: Some Xiaomi models (e.g. Redmi Note 8 Pro, POCO F1) Recovery resets may not work because of damaged partitions, which would require firmware through a PC.

Recovery Xiaomi via PC: step-by-step instructions

If the phone doesn't leave the Fastboot in the standard way, you'll need to connect to your computer.

• 💻 Windows computer 7/10/11 (on Mac/Linux Possible problems with drivers);
• 🔌 Original. USB-cable (better than the one that came with the kit);
• 📥 Mi Flash Tool (for firmware) or ADB/Fastboot Tools;
• 📁 Firmware for your model (download only from the official Xiaomi website or verified sources).

Step 1: Install Fastboot drivers

Without the right drivers, your computer won’t see your phone in Fastboot mode:

1. Download and install Mi. PC Suite from the official Xiaomi website (this will automatically install the desired drivers).
2. Connect the phone off to the PC, keeping Volume down + Meals to enter the Fastboot.
3. Open Device Manager (Win) + X → Device Manager) and check if the Android Bootloader Interface device appears in the Other Devices section.
4. If the driver is not installed, download it manually (for example, from here) and update through the context menu.

Step 2: Check the connection via Fastboot

Make sure your computer sees the phone:

1. Open the Command Prompt (Win + R → cmd).
2. Enter the command: fastboot devices If the phone is connected correctly, you will see its serial number (for example, 1234abcd fastboot).
3. If the list is empty, check the cable, port USB or repeat the installation of drivers.

Step 3: Reboot via Fastboot (if the system is intact)

If the phone is detected but does not leave Fastboot, try restarting it with the command:

fastboot reboot

If this doesn’t work, try an alternative command:

fastboot continue

Step 4: Firmware via Mi Flash Tool (if the system is damaged)

If the phone is cyclically back in Fastboot, you'll need a full firmware.

1. Download and install the Mi Flash Tool (the latest version can be found on the 4PDA or XDA Developers forums).
2. Unpack the downloaded firmware (.tgz or.zip) in a folder without Cyrillic characters.
3. Open the Mi Flash Tool, press Select and point the path to the firmware folder.
4. Connect your phone in Fastboot mode and press Refresh – the device must be determined.
5. Select firmware method: Clean All – complete cleanup (deletes all data); Clean All and Lock – cleanup + bootloader lock (recommended for official firmware); Save User Data is an attempt to save data (not always working).

Flash

💡

If the Mi Flash Tool gives an error "This package is for *** model only", then you have downloaded the firmware not for your model.

What to do if Xiaomi is not defined in Fastboot (EDL-regime)

If the phone doesn’t respond to buttons, isn’t charged, and isn’t detected in Fastboot, but the computer sees it as Qualcomm. HS-USB QDLoader 9008 – means the smartphone has moved to the EDL-Emergency Download Mode is a critical failure that requires special recovery tools.

In mode. EDL The phone looks dead (black screen, no button response), but it can still be resuscitated:

• 💻 QFil or Mi Flash Tool with support EDL;
• 📁 Firmware in.mbn or firehose format for your model;
• 🔑 Authorized Xiaomi account (for new models with lock) EDL).

Instructions for recovery through EDL:

1. Download the firehose firmware for your model (see on the 4PDA or XDA).
2. Install the Qualcomm HS-USB QDLoader 9008 driver (can be found in the firmware archive).
3. Open the Mi Flash Tool, select the firmware and connect the phone.
4. In the program settings, select EDL Mode and press Flash.

⚠️ Attention: On Xiaomi models 2020 Years and years later (e.g. Redmi Note) 10/11, POCO X3 Pro) EDL-To unlock, you will need an official Xiaomi account with a connection to the device or the help of a service center.

How to Avoid Getting into Fastboot in the Future

To make sure that Xiaomi phone no longer hangs on the Fastboot screen, follow the simple rules:

Do not interrupt the software update (even if the process is long)|

Use original chargers and cables|

Clean the cache regularly through Settings → Memory. → Cleanup|

Do not remove system applications without root rights|

Before resetting your phone, charge it to at least 50%.

-->

Common user errors leading to Fastboot:

• 🔋 Battery discharge up to 0% followed by inclusion on charging;
• 🔄 Interrupting the update (for example, due to a dead battery);
• 🗑️ Resetting settings via Recovery on a discharged phone;
• 🛠️ Installation of unofficial firmware without unlocking bootloader;
• 🔌 Connecting to a PC with unstable USB-port (may cause a failure in data transmission).

If you often experiment with firmware, we recommend:

• 🔓 Unlock bootloader in the official way (via the Xiaomi website);
• 📱 Install custom Recovery (TWRP) safe-backup;
• 💾 Regularly backups through Settings → System system → Backup.

Frequent questions about Fastboot mode on Xiaomi