A cracked or broken screen on Xiaomi Redmi 5 is a problem that many owners of this smartphone face even 6+ years after its release. The model, released in 2018, is still in demand due to the balanced characteristics and availability of spare parts. However, replacing the display here has its own peculiarities: from the non-obvious design of the mounts to the risk of damaging the sensor plume if disassembled slouch.
In this article, you will find detailed instructions for typical beginner errors, a comparison table of original and analog screens, and answers to questions that arise after the replacement (for example, why the touchscreen does not work or color artifacts appeared), we will also analyze when repair is advisable, and when it is easier to buy a new phone - taking into account the current prices for parts and services of service centers.
If you've never taken a smartphone apart, be prepared: Redmi 5 takes patience. It doesn't have a removable back cover, and it's glued to a frame using a strong adhesive. But with the right approach and toolkit (listed below), the procedure will take no more than 1-1.5 hours.
1. Diagnosis: Is the display really to blame?
Before you order a new screen, make sure that the problem is in it.
- 🔧 Cracks or chips on the glass, accompanied by non-functioning areas of the screen.
- 🖥️ Vertical/horizontal bands that do not disappear after rebooting.
- 🎨 Color distortion (pink, green or blue hue throughout the screen).
- ☠️ "Dead pixels or complete absence of image when backlighting is running (visible in bright light).
If the screen flashes, spontaneously turns on/off or reacts to late touches, the problem may lie in the display plume, motherboard or even battery, in which case replacing the screen will not help.
⚠️ Attention: Redmi 5 often has a defect, when after a fall, only the touchscreen stops working, and the image remains. In this case, just replace the touchpad (it goes separately from the matrix), which is cheaper by 30-50%.
To check the touch screen, use the service menu:
##6484##In the test that opens, swipe your finger over all areas of the screen – if there are “blind” areas, the sensor should be replaced.
2. Display selection: original vs analog
There are three types of screens available for Xiaomi Redmi 5:
| Type of display | Price (2026) | Pluses | Cons |
|---|---|---|---|
| Original (OEM) | 3 500–5 000 ₽ | Perfect color reproduction, full compatibility, long service life | High cost, rarely available |
| Premium analogue (e.g. BOE) | 2 200–3 200 ₽ | Quality close to the original, availability | There may be slight differences in brightness. |
| Budgetary analogue (no-name) | 1 200–1 800 ₽ | Low price, fast delivery | Marriage risk, poor color reproduction, short lifespan |
When choosing, pay attention to the article of the module. Redmi 5 (model m1803e7sg) suitable displays with the following markings:
- 📱 DM-TFT-LCD-5.99-HD+-IPS-18:9 (framed)
- 🔧 DM-TP-5.99-CAP-TOUCH (only touchscreen if the matrix is intact)
⚠️ Attention: In 2023, fake screens with the words "Original Xiaomi" on the package appeared, and you can check them by the serial number on the sticker of the module - the original one matches the number on the box.
A critical nuance for Redmi 5: if you buy a module without a frame, make sure that the kit comes with double-sided tape 3M or LOCA-Standard Scotch from the kit often falls off after 1-2 months.
💡
Before buying, check the reviews of the seller on the marketplace. Often under the guise of "original" screens sell repackaged counterparts with defective backlights.
3. Necessary tools
To replace the display on Redmi 5, you will need:
- 🔧 Plastic blades (2-3 pieces, 0.1–0.2 mm thick)
- 🔨 The screwdriver (PH00 or PH0 rear-cover)
- 🔥 Hair dryer or thermo-air station (for softening glue)
- 🧲 Magnetic mat or tray (so as not to lose screws)
- 📏 Suction (to remove the display after heating)
- 🧴 Isopropyl alcohol 90%+ (scavenge)
- 🔌 Tweezers (to disconnect plumes)
We further recommend:
- 🛡️ Antistatic bracelet (protection against static electricity)
- 🔍 loope USB-microscope (to check the contacts of plumes)
The cost of a full set of tools is about 1,500–2,000 ₽. If you plan to repair your smartphones regularly, it makes sense to buy a display repair kit (e.g., iFixit Pro Tech Toolkit).
☑️ Preparation of the workplace
4. Step-by-step instructions for replacing the display
Warning: the process requires care, one wrong move can damage the plumes or the motherboard, and if you're not sure about yourself, you better contact the service.
Step 1: Turn off and warm up your smartphone
1. Turn off Redmi 5 completely (press the power button and select "Switch off").
2. Heat the display edge dryer (not the center!) for 2-3 minutes at a temperature of 60-70 ° C. This will soften the glue.
3. Apply a suction cup to the bottom of the screen (near the Home button) and pull up. If the screen fails, repeat the heat.
Step 2: Separating the display from the frame
1. Insert a plastic blade into the resulting gap and carefully guide it around the perimeter, separating the display.
2. Don't pull the screen too much - it's connected to the motherboard with two plumes: a display and a touchscreen.
3. When the screen separates, place it on the table with the display down (so as not to damage the matrix).
⚠️ Attention: Redmi 5 has a metal bracket underneath the display that holds the plumes together. It needs to be bent carefully, not broken! Step 3: Unplug the plumes 1. Unplug 4 screws that hold the metal plate over the plumes (use a screwdriver). PH00). 2. Tap the plugs (black) and carefully remove the plumes. Don't pull the wires! 3. Take a picture of the plumes' location, which will help with the reverse assembly. Step 4: Install the new display 1. Transfer all the additional details from the old one to the new screen: - Speaker (stick to the display frame) - Notification LED (small board with wires) - Approximation/light sensor (black rectangle next to the speaker) 2. Connect the plumes to the new display and fix them with a metal plate. 3. Apply double-sided tape or LOCA-The stainless stains (not on the screen!) 4. Carefully attach the display starting at the top and press around the perimeter. Step 5: Assembly and Test 1. Twirl all the rear cover screws (don't pull over!). 2. Turn on the smartphone and check: - Does the touchscreen work (test ##6484##) - Are there any color artifacts (pink/green spots) - Do the notifications (the LED should flash) Are correctly displayed (the LED should flash) What to do if the screen does not turn on after replacing? 1. Check if the plumes are tight in the connectors. 2. Make sure that the metal plate above the plumes is fixed by screws. 3. Try connecting the old display - if it also does not work, the problem is the motherboard. 5. Typical errors and how to avoid them Even experienced masters sometimes make mistakes when replacing the display with a Redmi 5. Here are the most common: 🔌 Damage to the touchscreen plume when the display is separated. Solution: Use only plastic blades, metal can cut through the plume. 🔥 Overheating the matrix with a hairdryer. Solution: Keep the hairdryer at a distance of 5-7 cm and do not direct the air flow to one point longer than 10 seconds. 🧲 Losing screws or putting them in the wrong holes Solution: Set the screws in groups (e.g., "hull", "plate plumes") and sign the containers. 🎨 Dust gets under the screen. Solution: Replace in a clean, well-lit room. Use a sticky roller to remove mottles if necessary. Another common problem is a non-functioning proximity sensor after replacement. This happens if you forget to plug in its plume or damage the contacts. Check the sensor using the engineering menu: ##617466## In the Proximity Sensor section, the value should change from 5 (far) to 0 (close) when you put your hand up. 💡If the display is working after the replacement, but the touchscreen is floating or not responding to touch, the problem is that the plume is not fully attached. Try reconnecting it or replacing the plume separately. 6. Prices for replacement of the display Xiaomi Redmi 5 in service centers in 2026: Type of repair Cost (with part) Cost (without part) Term of execution Display Replacement (original) 5 500-7 000 ₽ 1 500–2 000 ₽ 1–2 days Display replacement (analogue) 3000–4 500 ₽ 1 000–1 500 ₽ 1 day Touchscreen replacement (separately) 2,000–3,000 ₽ 800–1 200 ₽ 1–2 hours Self-substitution will be cheaper, but keep in mind the hidden costs: 🛠️ Buying tools (if they are not available) — ~2 000 ₽. 🔄 The risk of damaging the phone (for example, tearing off the plume) – repairs can cost 3-5 thousand. ₽. ⏳ Time - if you don't have experience, it'll take 2-3 hours? If you're using it as a spare phone or for simple tasks (calls, instant messengers), yes. But if you're planning on buying a new smartphone in the coming year, maybe you should put aside money for an upgrade. For example, the Redmi Note 12 costs from 12 000. ₽ propose AMOLED-screen, 5G 7. Recycling old display Don't throw the old screen into the usual garbage! Smartphone displays contain heavy metals (indium, tin, lead) and liquid crystals that are harmful to the environment: ♻️ Electronics reception points (e.g. Ecotechnologies or MegaRecycle) can pay 50-200 for the display. ₽. 🔄 Repair workshops – some take old screens for use as donors. 📦 Special containers in electronics stores (Svyaznoy, M. Video). If the display is still partially functional (e.g. cracked glass, but the matrix is intact), it can be sold on the Avito or Yule as a "parts display." Average price is 300-800 ₽. FAQ: Frequent questions after the replacement of the display 🔹 Why did the screen become dim or pink after the replacement? That's a typical problem with cheap analog displays. Reasons: poor-quality backlighting (low-cost LEDs are used in budget modules); poor factory color calibration; damage to the display plume during installation. Solution: Return to the seller (if the screen is warranty) or calibrate the colors in the settings (Settings) → Display. → Color mode). 🔹 The touchscreen works, but it's late. How do you fix it? The latency of the touchscreen after you replace it is usually related to: Incomplete contact of the plume, reconnect it. Poor sensor quality in cheap analogues. Contact contamination, wipe them with alcohol. If the problem persists, try resetting to factory settings (Settings) → Additionally. → Recovery and discharge). 🔹 Can you just replace the glass, not the whole display? Technically, but it's complicated and expensive. Redmi 5 has glass glued to a matrix, and it requires (LOCA-Experience with liquid adhesives, clean space (dust under glass will ruin the result), the cost of such a replacement in the service is 3,000-4000 ₽, That's the same as the price of a new module. 🔹 When you replace it, the light sensor doesn't work. What do you do? The light sensor on Redmi 5 is next to the speaker, and it's connected to the plume of the display. If it doesn't work, check if the sensor plume is connected to the motherboard. Run the sensor test (#617466##) – if the Light Sensor value does not change, the sensor is damaged. Make sure that the sensor is not affected by glue or dirt, and if the sensor is defective, it can be replaced separately (cost: 200-400). ₽). 🔹 How long will the new screen last? The life of the display depends on the type: Original - 3-5 years when used carefully, Premium analog - 2-3 years, Budget analog - 6 months-1.5 years (often begin to "yellow" or peel off). Use tempered glass (like Spigen Tempered Glass); Avoid overheating (don't leave your phone in the sun); don't press the screen when cleaning.