How to get in BIOS Xiaomi Mi Notebook Pro: all the ways and nuances

Introduction

Notebooks Xiaomi Mi Notebook Pro gained popularity due to the powerful “iron” and affordable price, but their firmware and BIOS And they have a number of features, and unlike traditional laptops, the entrance to the computer is a very simple one. BIOS On Xiaomi devices, it can be a bit of a problem, especially if you’re used to standard keys. F2 In this article, we will discuss all the current ways of entering the BIOS for different versions of the Mi Notebook Pro, including models 2022-2026.

It is important to understand that BIOS Xiaomi often blocks certain features (e.g., disabling Secure Boot or changing mode) SATA), The wrong actions can lead to locking the bootloader or loss of warranty. So before experimenting, it is worth exploring the specifics of your model - more about this in the section on training.

If you plan to reinstall Windows, update firmware or change hardware settings – without access to the BIOS Next, we will look at the proven methods for all versions of the Mi Notebook Pro, as well as analyze the typical errors and their solutions.

Preparation for entry into BIOS: know-how

Before you try to get in BIOS, Follow a few key steps:

• 🔋 Charge your laptop at least 50%. BIOS When low charge can cause a malfunction of the firmware.
• 🔌 Turn off the periphery: mouse, keyboard, USB-They can conflict with the loading process.
• 📋 Check out your Mi Notebook Pro model. Sign-in methods may be different for: Mi Notebook Pro 15.6" (2020–2021) — Intel Classic; Mi Notebook Pro X 15 (2022) — processor-wise AMD Ryzen; Mi Notebook Pro+ 2023/2026 — new audits OLED-screen.
• 🔑 Check the Windows version. On laptops with Windows 11 preinstalled, Fast Startup can be activated, which blocks access to the Windows Windows Windows Windows. BIOS.

Pay special attention to boot mode. Some Xiaomi models have Secure Boot enabled by default, which limits setting changes. BIOS. If you plan to install an alternative OS (like Linux), this mode will have to be disabled – but you can only do this from Windows via msconfig or special utilities.

💡

On Xiaomi laptops with AMD Ryzen (e.g. Pro X 15) for entry into BIOS Sometimes you need to double-press the hot key at 1 second intervals. Try this method if the standard method doesn't work.

Also note that after unsuccessful login attempts, the system may temporarily block access to the system. BIOS (In this case, turn off the laptop for 10-15 minutes and try again.

Method 1: Standard Hot Key Login

The most common method is to use hotkeys when you turn on your laptop. However, the Xiaomi Mi Notebook Pro has standard combinations (F2, Del's often don't work. Use it instead:

Step-by-step:

1. Turn off your laptop (not restart!).
2. Press and hold the desired key (see table above).
3. Without releasing the key, press the power button.
4. Hold the key until the Xiaomi logo or BIOS menu appears.

Make sure your laptop is off (not in sleep mode)

Shut it down. USB-device

Use the correct key for your model (see table)

Press the key before power is turned on-->

If the screen is still black or if the Preparing Automatic Repair message appears, you press the key too late. Try again by holding the button immediately after you turn it off.

Method 2: Sign in to Windows 10/11 settings

If the hot keys do not work, you can enter the BIOS This method is universal and suitable for all models of Mi Notebook Pro, including new versions with Windows 11.

Instructions for Windows 10:

1. Open Start → Settings → Update and Security → Recovery.
2. In the Special Download Options section, click Reboot Now.
3. After the reboot, select: Diagnostics → Additional settings → UEFI embedded software settings.
4. Click Reboot – the laptop will automatically open the BIOS.

Instructions for Windows 11:

1. Open the Start. → Parameters → System system → Recovery.
2. Find the Advanced Startup Settings section and click Reboot Now.
3. After the reboot, follow the path: Troubleshooting → Additional parameters → Parameters of embedded software UEFI.

This method is guaranteed to work if:

• 🖥️ Windows boots normally (no critical errors);
• 🔐 The system has not disabled access to UEFI through group politics;
• 🛠️ The laptop is not in S Mode (relevant for some versions of the Mi Notebook Pro with Windows 11 preinstalled).

Hot keys when switched on

Through Windows settings

Special utilities (e.g, MIUI+)

Another way.-->

An important point: if you plan to change the settings BIOS (For example, disable Secure Boot after exiting the UEFI Windows may require re-activation. Save the product key in advance with the command:

wmic path softwarelicensingservice get OA3xOriginalProductKey

Method 3: Alternative methods (for experienced users)

If standard methods do not work, you can use advanced methods, but they require caution.

1.Command line entry

Open the Command Prompt (Administrator) and do:

shutdown /r /fw /t 0

This command restarts the laptop directly into UEFI BIOS. The method works on all Mi Notebook Pro models, but may not work if you turn off access to firmware through the OS.

2. Utility use MIUI+ (laptop-only MIUI for PC)

On some models Xiaomi preinstalled utility MIUI+, This allows you to control system parameters, including access to BIOS:

1. Open up. MIUI+ taskbar.
2. Go to the System Settings section → Extended.
3. Find the option to reboot in BIOS and confirm the action.

3.Dumping BIOS disaster-recovery

If the laptop does not load at all, you can reset BIOS The Mi Notebook Pro motherboard usually has contacts on the Mi Notebook Pro motherboard. CLR_CMOS — They need to be closed with a screwdriver on 10 Seconds (laptop must be turned off and disconnected from the network!).

💡

Reset BIOS jumper CLR_CMOS This results in the loss of all user settings, including download priority and security settings!

Warning: Incorrect closure of contacts can damage the motherboard.If you are not sure about your actions, contact the Xiaomi service center.

Typical problems and their solutions

When you try to enter BIOS Xiaomi Mi Notebook Pro users often encounter errors. Let's consider the most common and ways to fix them.

1.The laptop does not respond to the keys

Causes and solutions:

• 🔄 Fast Startup enabled → Turn it off in the control panel. → Power supply → Action of power buttons.
• 🖥️ The keyboard is not initialized → Connect the outside. USB-keyboard.
• 🔒 BIOS blocked by → Try logging in via Windows (see Method 2).

2.Preparing Automatic Repair message appears

This means Windows is trying to recover. Solution:

1. When a message appears, click on Additional settings.
2. Go to Troubleshooting. → Additional parameters → Parameters of embedded software UEFI.

3. BIOS password-request

Some Mi Notebook Pro models (especially corporate ones) may have a password set. BIOS. Options for action:

• 🔑 Try the standard passwords: admin, 1234, xiaomi.
• 📧 Contact Xiaomi with proof of purchase – they can reset the password remotely.
• 🛠️ In the extreme, a re-flashing will be required. BIOS via the programmer (only in the service centre).

💡

If after discharge BIOS The laptop stopped loading, check the settings of Boot Mode. for Windows 10/11 should be chosen UEFI, Not Legacy.

4. no download menu (Boot Menu) is displayed

If the key F12 Does not open the download menu:

• 🔧 Check in. BIOS, If the Fast Boot option is enabled, turn it off.
• 🖱️ Use an external keyboard (especially relevant for the Mi Notebook Pro X 15).
• 🔄 Update. BIOS Up to the latest version via the official Xiaomi website.

What to do after entering the BIOS: baseline

When you finally got in BIOS, It's important not to change the settings at random. Let's look at the key sections that might be useful:

Section Main (Main)

Here is information about the system:

• 🖥️ Version. BIOS — useful for checking the relevance of the firmware.
• 💾 Model SSD/HDD — It will be useful when replacing the storage.
• 🔋 Battery condition - on some models shows battery wear.

2. Boot section (Download)

The most important section to change the order of loading:

• 🔄 Boot Mode - choose UEFI Windows 10/11 Or Legacy for older OSes.
• 💿 Boot Priority – Set the First Place USB-servo.
• 🔒 Secure Boot – Disable if you plan to install Linux.

💡

On laptops Xiaomi Mi Notebook Pro with AMD Ryzen (e.g. Pro X 15) Disabling Secure Boot may cause an error 0xc000000f When you boot Windows, you'll need to re-activate the OS.

Section 3 Advanced (Additional)

Here are the extended settings:

• 🔌 USB Configuration – Enable support USB 3.0 for bootable flash drives.
• 💡 CPU Configuration – Hypertreading or virtualization can be disabled (not recommended without needing).
• 🔊 Audio Device – Disabling the sound card (useful for driver problems).

Section 4 Security (Security)

Contains the protection settings:

• 🔐 Set Supervisor Password – Set a Password BIOS.
• 🛡️ TPM Configuration – Module management TPM (important for Windows 11).

Warning: Changing the settings in the Advanced or Chipset section can cause your laptop to run in an unstable way. If you're unsure of the option's purpose, leave it unchanged.

Update BIOS Xiaomi Mi Notebook Pro

Regular updates BIOS Improves hardware compatibility and corrects errors, but on Xiaomi laptops, this process has nuances.

How to check the version BIOS

This can be done in two ways:

1. In fact. BIOS — version is displayed on the main screen.
2. In Windows: Open Command Prompt and Enter: wmic bios get smbiosbiosversion

Where to download firmware

The official firmware for Mi Notebook Pro is available on the Xiaomi website:

• 🌐 Go to the support page of Xiaomi.
• 🔍 Enter a laptop model (e.g. Mi Notebook Pro 15.6 2021).
• 📁 In the Downloads section, find the file marked BIOS.

How to update BIOS

Warning: interrupting the upgrade process may render the laptop inoperable.

• 🔋 Laptop is 100% charged or connected to the network.
• 🔌 No power outages.
• ⏳ The process is not interrupted (it will take 3-5 minutes).

Instructions:

1. Download the archive with the firmware and unpack it.
2. Put the flash drive on (FAT32) and copy the firmware file to it (usually with the.fd or.rom extension).
3. Restart your laptop and enter BIOS.
4. Find the Advanced section → Start Easy Flash (or similar).
5. Select the flash drive and confirm the update.

After successful update, all settings BIOS Make a note of or take pictures of important parameters (e.g., loading order) in advance).

FAQ: Frequent questions about BIOS on Xiaomi Mi Notebook Pro