Extraction SIM-Xiaomi smartphone cards seem like a simple procedure, but in practice many users face difficulties: a jammed tray, a lost key or a fear of damaging the device. Especially relevant problem for owners of flagship models with a sealed body (for example, Xiaomi 13 Ultra or Mix Fold 3), where the design of the tray is different from budget lines. In this article, we will analyze all the nuances – from tool preparation to solving emergency situations when SIM-card "doesn't want to go out.
It is important to consider that the process may differ depending on the tray type (single, dual or hybrid for SIM+ microSD) and smartphone model. For example, the Redmi Note 12 uses a standard tray, and the POCO F5 Pro uses a reinforced mechanism with moisture protection. We have compiled universal methods that will suit 95% of Xiaomi devices, including the rare cases when the tray is stuck or deformed.
If you've never taken out SIM-If you're looking at the map before or if you're afraid of damaging your smartphone, don't worry. If you do it right, the risk is minimal, and our step-by-step instructions with visual cues will help you avoid errors. We added a comparison table of trays of different models and a video guide at the end of the article to make it clear.
Preparation: What will be needed to extract SIM-map
Before you start extracting, make sure you have everything you need. The main tool is a paper clip to remove the tray (company with the phone), if it is not available, alternatives will be suitable, but with caution: inappropriate items can scratch the body or break the tray mechanism.
Here is a complete list of what might be useful:
- 📎 A paper clip from the set (or a special key for SIM-tray)
- 🔦 Lantern (for illumination of the tray hole in a dark room)
- 🧲 Magnet (to remove fallen paper clips inside the case)
- 📱 Spare. SIM-card (to check the performance of the tray after extraction)
- 🧴 Alcohol wipes (to clean the contacts of the tray if the phone can not see) SIM)
If there is no paper clip, you can use:
- 🖊️ The gel handle rod (diameter) ~0.7 mm mm)
- 📌 A needle or pin (only if there is no risk of breakage)
- 🔧 Thin screwdriver (with flat end, not more than 1 mm)
⚠️ Warning: Never use toothpicks, matches or plastic items - they crumble and may get stuck inside the hole. Also avoid metal objects with burrs (such as paper clips) that scratch the anodized coating of the case.
Before you start, turn off your smartphone (optional, but recommended for safety) and put it on a flat surface. If the phone is in a case, remove it - this will make it easier to access the tray.
Where is the tray for SIM-card in Xiaomi smartphones
In most models Xiaomi trays for SIM-The map is on the left side of the map (if you look at the screen:
- 📱 Xiaomi Mix Fold 2/3, Mix 4 — tray on the right (due to the design features of the folding screen)
- 📱 Black Shark 5/4 Pro – tray on top (near the power button)
- 📱 Redmi 10A, POCO C50 — bottom-tray (under the speaker)
To determine the location accurately, inspect the case of the smartphone: look for a small hole (diameter) ~1 mm) with a metal ring inside, with a pictogram next to it. SIM-chart SIM. On some models (e.g. Xiaomi) 11T Pro) the hole is concealed by a cap, which must be carefully tucked with the nail.
| Xiaomi model | Location of the tray | Type of tray | Features |
|---|---|---|---|
| Redmi Note 12 Pro+ | Left face | Hybrid (2 nanoSIM + microSD) | Spring-engineered tray |
| POCO F5 Pro | Left face | Double (2 nanoSIM) | Enhanced protection against moisture (IP53) |
| Xiaomi 13 Ultra | Left face | Double (2 nanoSIM) | Rubber sealed tray |
| Black Shark 5 Pro | Upper edge | Double (2 nanoSIM) | A hole next to the power button |
| Redmi A2 | Left face | Hybrid (2 nanoSIM + microSD) | The tray without a fixator (falls when tilted) |
If you can’t find the hole, use a flashlight, which can be weak on dark cases (for example, on Xiaomi 12S Ultra in Classic Black).
💡
If the tray is located below (as in Redmi). 10A), Turn the phone down before retrieving it. SIM-card won't fall out accidentally.
Step-by-step instructions: how to remove SIM-map
Follow this algorithm to extract the tray without risking damaging your smartphone:
- Turn off your phone (optional, but recommended for safety).
- Take a paper clip from the kit and unbend it to get a straight metal bar length of ~3 cm.
- Insert the paperclip into the tray opening at a 90 degree angle to the body. Press with force until you feel a click.
- The tray will extend 1-2 mm - carefully pull it with your fingers until completely removed.
- Take it away. SIM-card(s) and, if necessary, clean the contacts of the tray with an alcohol napkin.
- Then put the slack back in the back (be sure it is straight, without skewing).
If the tray does not come out the first time:
- 🔄 Check if the stain inside the hole has skewed.
- 🔧 Try to push harder (but without bigotry - don't break the mechanism).
- 🔍 Light the hole with a flashlight – it may be that debris is stuck inside.
☑️ Pre-extraction check SIM-map
Critical point: if the tray is pushed halfway and stuck, don't pull it by force - it can break the guides. Instead, gently press the tray back to the click, and then try again.
⚠️ Note: In models with moisture protection (for example, Xiaomi 13 Pro with the IP68) The tray has a rubber seal. After extraction, check its integrity - if the seal is torn, the sealing of the housing will be violated.
What to do if the tray is stuck or does not come out
The fact that the tray is not being pushed at all is more common than it seems, and the reasons can be different, from dust to factory defects.
1.The tray moved out halfway and stuck
This is the most common problem.
- 🔧 Carefully press the tray back before clicking, then try pushing again.
- 🧲 If the tray is skewed, use tweezers to align it.
- 📱 Light a flashlight inside the slit - it may be that there is stuck debris (dust, fibers of fabric).
2.The paper clip broke inside the hole
If the tip of the paper clip breaks and gets stuck:
- 🧲 Apply a magnet to the hole – sometimes it helps to pull out a metal shard.
- 🔧 Use a needle or toothpick to gently push the shard inside the case (then remove through the speaker or disassemble the phone).
- 🛠️ In extreme cases, contact the service center - self-extracting can damage the motherboard.
3. The tray shall not be fixed after removal
If the tray falls out or does not click when inserted:
- 🔍 Check if the metal tongue inside the phone is bent.
- 🧴 Wipe the tray contacts with alcohol - sometimes oxidation interferes with normal operation.
- 📦 If the tray is damaged, order a replacement (the article can be found on the model of the phone). + "SIM tray").
What to do if water gets into the tray?
If none of the methods worked, there may be a problem with the tray mechanism, in which case it is better to contact an authorized Xiaomi service center, especially if the phone is warranty.
How do you put it in? SIM-Map back: nuances for different models
Reverse installation SIM-The main rule is that the card should be in the tray chip down (on most models). However, in some smartphones (for example, Xiaomi Mix Fold 3) the orientation may be different - check with marking on the tray.
Step-by-step:
- Place the tray on a flat surface with contacts upwards.
- Place it. SIM-map(s) in the appropriate slots: 📱 SIM1 — The main slot (usually supports) 4G/5G). 📱 SIM2 MicroSD - Additional slot (may not support) 5G).
Make sure the card fits tightly to the contacts and does not protrude beyond the edges of the tray.
Insert the tray back into the phone before the click. Don't push too hard - if the tray doesn't come in, check if the SIM is installed correctly.
Features for specific models:
- 📱 Xiaomi 13T Pro: the tray has double fixation - first click when inserted, then the second when completely blocked.
- 📱 POCO X5 Pro: SIM-The cards are placed by the chip upwards (reverse orientation!).
- 📱 Redmi Note 12 Discovery Edition: tray with spring mechanism - do not press on it when extracting.
⚠️ Attention: If after installation SIM-The phone doesn't see the card, check: Right orientation of the map in the tray. Clean contacts (wipe with alcohol). SIM (30 percent of the time, the problem is not the tray, it's the faulty one. SIM-map-to-miss.
💡
If the phone can't see SIM-card after reinstalling, restart it or reset network settings in Settings → SIM-maps and mobile networks → Resetting network settings.
Frequent Mistakes and How to Avoid Them
Even experienced users sometimes make mistakes when working with the Internet. SIM-Here are the most common of these and how to prevent them:
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Use of inappropriate items (toothpicks, knife) | Scratches on the body, breakage of the tray mechanism | Use only a metal clip or a special key |
| Forced extraction of a stuck tray | The failure of the guides, the failure of the SIM-reader | Carefully press back on the tray and try again |
| Installation SIM-wrong-side | Phone can’t see SIM, possible scratches on chip | Check with the marking on the tray (usually there is a diagram) |
| Removing the tray with the phone on | Short circuit risk (relevant to wet conditions) | Turn off your phone or put it in airplane mode. |
| Dust/garbage in the tray | Bad contact, phone can't see SIM | Clean the tray regularly with a dry brush |
Another common mistake is to ignore the rubber seal in moisture-protected models. If the seal is torn or lost, the phone loses its tightness, which can lead to oxidation of contacts when moisture enters. In service centers, the tray seal costs ~200-300 rubles, but you can order it yourself (see the code for parts, for example, Xiaomi SIM tray gasket).
If you often get out SIM-card (for example, for trips abroad), consider buying a spare tray. it is inexpensive (from 100 rubles) and will help to avoid wear of the main mechanism.
Video Instructions and Additional Materials
For clarity, we have prepared a selection of videos, which shows the extraction process. SIM-Maps on different Xiaomi models:
- 📺 Extraction SIM Xiaomi 13 Pro (with protection) IP68)
- 📺 How to take the tray out POCO F5 paperless
- 📺 Solving the problem of a stuck tray in Redmi Note 12
If you have a rare model (for example, Xiaomi Civi 3 or Black Shark 5 RS), look for a video with a parsing of your device. Pay attention to the comments under the videos - there are often nuances discussed that the author does not voice.
Also useful materials:
- 🔧 Official Xiaomi support (instructions for specific models)
- 🛠️ Forum 4PDA (squashing)
- 📦 AliExpress (parts: trays, seals, keys)
💡
If you travel frequently, consider buying an eSIM instead of a physical one. SIM-Many Xiaomi models (starting with the Xiaomi 12 series) support this technology, eliminating the need to retrieve the tray.