How to get it out right SIM-Map from Xiaomi phone: instructions for all models

Extraction SIM-Xiaomi smartphone cards seem like a simple task, but in practice users face typical problems: a jammed tray, a lost key or the fear of damaging the device.+ Xiaomi 13 Ultra, which simultaneously installs nano-SIM and microSD memory card. In this article, we will analyze all the nuances of the process - from tool preparation to actions in emergency situations.

It is important to consider that the design of trays Xiaomi has evolved: in the budget series (POCO M6 Pro, Redmi A2) The classical retractable mechanism is often used, and in flagships (Xiaomi). 14, Mix Fold 3) — We've got reinforced locks to protect against moisture. 15+ brand models and highlighted universal steps, as well as critical errors that lead to breakdowns. SIM-cards or are afraid to damage sealing rubber bands (relevant for devices with protection) IP53/IP68), This guide will help to avoid risks.

Preparation: What will be needed to extract SIM-map

Before you start retrieving, make sure you have everything you need, and the lack of the right tools is the main cause of damage to the tray or the phone case, and here's the minimum set:

• 🔑 Paperclip or key SIM-tray (goes complete with the phone; if lost - fit unbend stationery clip diameter 0.7-0.9 mm).
• 📱 Clean surface (table with soft substrate so as not to scratch the screen when pressed).
• 🔦 Light source (lantern or desk lamp – the hole to extract the tray is often poorly visible).
• 🧴 Alcohol wipes (for cleaning the tray and contacts) SIM-If you are planning to reinstall the card).

For models with a hybrid slot (for example, Redmi Note 11 Pro 5G or POCO X5 Pro) additionally prepare:

• 📁 Plastic tip tweezers (to gently remove microSD without damaging contacts).
• 🔍 Loupa (contacts on memory cards are small and easy to bend).

⚠️ Warning: Do not use sharp objects (needles, toothpicks, knives) instead of the key, which causes the sealing gum to rupture in water-protected models (IP53/IP68), It's a revocation of the warranty. In Xiaomi service centers, it costs a lot to repair it. 3–5 thousand rubles.

Where is the slot for SIM-maps in Xiaomi phones

The location of the tray depends on the model and series of the smartphone, 90% of the time it is on the right end (if you look at the screen), but there are exceptions:

To accurately determine the location of the slot on your model:

1. Look at the phone box -- there's usually a diagram.
2. Or search for the model name + “sim slot location” (e.g., “Xiaomi 13 Lite sim slot location”).
3. For IP68 devices (such as Xiaomi 13 Ultra), check if there is a red mark near the hole – it indicates the presence of a seal.

⚠️ Attention: In models Xiaomi Civi 2/3 redmi K50/K60 The tray extraction hole is hidden under a decorative stub. If you can't find it, light it up at an angle, and it should reflect light.

Step-by-step instructions: how to pull out SIM-map

Follow this algorithm to extract the tray without risking damaging the phone:

1. Turn off your phone (optional, but recommended for contact safety).
2. Place the device on a flat surface with the screen up.
3. Put the key (or paperclip) in the hole next to the slot to the end. Press with moderate force - it should sound click.
4. When the tray is pushed 1-2 mm, gently pull it with your fingers. Don't make any effort - if it doesn't come out, check if the key is fully in.
5. Extract. SIM-If it's stuck, shake it slightly to the side.

For hybrid slots (e.g., in the POCO F5 or Redmi Note 12 Pro):

• 📇 If two nano-SIMs are installed, remember their order (tray is usually marked as «SIM1» and «SIM2»).
• 💾 When removing microSD, don’t touch metal contacts – static electricity can damage data.

Phone is on a soft surface | Used original key or paperclip | Clean (no dust) | No pressure on screen or back cover-->

⚠️ Note: In the Xiaomi Mix Fold models 2/3 The tray is locked by a folding mechanism before being removed. SIM-roll the phone in a flat position, otherwise the tray will not come out until the end.

💡

If the key doesn't enter the hole, check it for bending. Often the paper clips bend when you first use, straighten it with pliers or take a new one.

What to do if the tray is jammed or does not come out

If you don't push the tray out after you press the key, don't panic. Here are the possible causes and solutions:

If the tray is jammed due to moisture (relevant for Xiaomi 13 Pro or Mix Fold 3):

1. Do not use force - it can break the fixture.
2. Put your phone in a dry, warm place for 1-2 hours (e.g., next to the heating battery).
3. Try to remove the tray again. If it doesn't work, contact the service.

How do you put it in? SIM-Map back: nuances for different models

Installation SIM-The card in the tray requires no less precision than the extraction:

• 📱 Check the orientation of the map – the bevelled angle should match the shape of the tray.
• 🔄 Don’t confuse the parties – contacts SIM-The cards should be facing downwards (to the back of the tray).
• 📶 For hybrid slots (e.g. Redmi Note 12): If you install a microSD, it must enter before the click, but not lock the second slot for nano-SIM.

For models with double SIM-card (for example, Xiaomi) 13T Pro):

• 📞 If you use two SIM-Make sure that the cards support Dual. 4G (information is in the characteristics of the model).
• 🔧 In settings (Settings) → SIM-maps and mobile networks, check the priority of networks for each card.

⚠️ Note: In Xiaomi phones with support 5G (for example, POCO F5 5G or Redmi K60) second-second SIM-The card can only work on networks 4G/3G, if the first use is 5G. This is a hardware limitation and cannot be circumvented by software.

💡

Before installing the tray back, make sure that the sealing gum (if any) lies flat and not twisted. otherwise the phone will lose moisture protection!

Frequent Mistakes and How to Avoid Them

Analysis of service center calls shows that 60 percent of SIM-related breakdowns are due to typical user errors, and these are the most common:

• 🔨 Use of inappropriate tools (knives, forks, screwdrivers) - leads to rupture of the seal or deformation of the tray.
• ⚡ Removing the tray when the phone is turned on - can cause a short circuit if SIM-The card concerns contacts during movement.
• 🔄 Forced insertion SIM-cards on the wrong side – scratches contacts, which leads to a bad signal.
• 💦 Moisture entering the slot (for example, after rain) – oxidizes the contacts, and the phone stops seeing SIM-map.

How to avoid problems:

• 🛠️ For models with IP68 (For example, Xiaomi 13 Ultra) after removing the tray, check the seal for integrity.
• 📶 If the phone can't see SIM-card after installation, wipe its contacts with a smooth (without pressing!) and restart the device.
• 🔋 Do not remove the tray when the battery is low (less than 20%) – if the phone turns off during the process, a modem may fail.

Features for flagship and rare Xiaomi models

Some Xiaomi devices have unique tray designs that you should know about in advance:

• 📱 Xiaomi Mix Fold 2/3: The tray is locked by a folding mechanism. Before you pull it, turn it flat.
• 🎮 Black Shark 4/5: The key hole is hidden under a decorative plug, press it with force to open access.
• 📸 Xiaomi 12S Ultra: the tray has an additional lock to protect against moisture. When extracting, apply the force strictly perpendicular to the body.
• 💎 Xiaomi Civi 2/3: thin body requires special care - when pressing with a key, point the phone against the table to avoid deflection.

For eSIM-enabled devices (e.g. Xiaomi 13 Lite):

• 📱 If you use eSIM, you will be able to use physical SIM-The card is optional, but the slot remains functional for microSD or a second nano-SIM.
• ⚠️ Some operators (for example, MegaFon or Beeline) block the eSIM operation if the slot has a physical setup. SIM. Check the fare conditions.

FAQ: Answers to Frequent Questions