Extraction SIM-Xiaomi Redmi cards seem like a simple task, but in practice, users face typical problems: a jammed tray, a lost key or a fear of damaging the device. In this article, we will analyze all the nuances of the process, from preparing tools to acting in emergency situations. We will pay special attention to models with hybrid slots, where SIM Shares space with a microSD card, and explains how to avoid damage to contacts.
The material is relevant for all modern Redmi lineups (including Redmi Note 12/13, Redmi 12/13, Redmi K60, etc.), but also applies to older models like Redmi 9 or Redmi 8. If your smartphone belongs to the POCO or Mi series, the principles will remain the same, but the location of the slot may differ - we will mention this separately.
Preparation: What will be needed to extract SIM-map
Before you start extracting, make sure you have everything you need. SIM-The tray (aka eject pin) that comes with the phone, and if it's lost, alternatives are suitable:
- 📍 Paperclip (unfolded, not more than 0.7 mm in diameter)
- 🪡 Needle from sewing machine (dull, without burrs)
- 🔧 Special tool from the remake for phones
- 📏 Toothpicking (only for trays with wide opening)
Important: do not use sharp objects like needles for sewing or pins - they can scratch the inside of the hole or damage the fixation mechanism. If there is nothing suitable at hand, it is better to buy a new eject pin (costs 50-100 rubles in accessories stores).
Also prepare:
- 🔋 Place with good lighting (better to use a table lamp).
- 🧲 Magnet or tray to avoid losing small parts (if you plan to clean the tray).
- 📸 Another person's phone to film the process (in case you need to show the problem to the master).
Where is the slot for SIM-maps in Xiaomi Redmi
Most Xiaomi Redmi models are a slot for SIM-The map is on the left side of the map (if you look at the screen:
- 📱 Redmi K50 Gaming – slot on the right side (due to non-standard button location).
- 📱 Redmi Note 10 Pro and older – the key hole can be closer to the top or bottom edge (depending on the modification).
- 📱 Redmi 9A/9C — The slot is on the upper edge (rare for a ruler).
To determine the exact location, look around the phone body: look for a small circular hole with a diameter of ~1 mm with a metal rim, next to it can be an SIM or a card icon. On some models (for example, Redmi Note 12 Pro+), the hole is covered with a plug - you need to carefully tuck it with your nail.
What does the slot look like on rare models?
| Xiaomi Redmi Model | Slot location | Slot type | Features |
|---|---|---|---|
| Redmi Note 12/13 | Left face, middle. | Hybrid (2 nano-SIM or 1 nano-SIM + microSD) | Spring-engineered tray |
| Redmi 10/11 | Left face, closer to the top | Hybrid | The hole is covered with a rubber plug. |
| Redmi K60 | Left face, closer to the bottom | Double (2 nano-SIM, no microSD) | A reinforced-fixed tray |
| Redmi 9A/9C | Upper edge | Hybrid | Smaller diameter hole (0.6 mm) |
Step-by-step instructions: how to remove SIM-map from Xiaomi Redmi
Follow this algorithm to extract the tray without risk:
- Turn off the phone (optional, but recommended for safety) Press and hold the power button, then select Turn off.
- Find a hole for the key (see section above) and make sure it is not clogged with dust.
- Put a key or an alternative tool into the hole at a 90° angle to the body. Press with effort but no fanaticism, it should be clicked.
- Get the tray out: when it's pushed 1-2 mm, pull it with your fingers. Don't pull the key - it can break the mechanism!
- Extract. SIM-If the tray is hybrid, remember the location of the cards (usually the nano-SIM is placed in the first slot).
☑️ Checklist before extraction SIM-map
If the tray does not come out the first time:
- 🔄 Repeat the press 2-3 times (sometimes the mechanism sticks").
- 🔦 Light a flashlight into the hole - it may have got dirt.
- 🛠️ If the key is bent, replace it (using a damaged tool will make the problem worse).
💡
If the tray is jammed, don't try to pull it out with pliers! Put the phone in a warm place for 10 minutes (such as next to the battery) - the metal will expand and the mechanism can unlock.
What to do if the key is for SIM-cards lost or broken
According to statistics, 30% of users lose eject pin in the first six months of using a phone. If the key is not at hand, use one of the proven ways:
- 📎 Paperclip: unwind it so that the end is smooth and not sharp. The diameter should match the hole (check for light).
- 🧷 Stationery button: suitable for models with a wide hole (for example, Redmi 8.
- 🔨 Scoop: Take a small screw (diameter 1-1.5 mm) and gently screw it into the hole for 1-2 revolutions, then pull.
- 💳 Bank card edge: if the tray is pushed up to 1-2 mm, try to tamper with a plastic corner of the card.
⚠️ Warning: Do not use toothpicks or matches - they crumble and can clog the mechanism. If the tray does not respond, do not apply a force greater than 2-3 kg (this can bend the slot frame).
If none of these methods worked, go to the service center, and the masters use special devices (such as vacuum suction cups for trays) that will not damage the phone, and the cost of the service is from 200 to 500 rubles.
💡
Never try to remove the tray by inserting the tool at an angle.This causes the thread to break inside the hole and makes further extraction impossible without disassembling the phone.
How do you put it in? SIM-Map back: nuances for hybrid slots
Installation SIM-Keep your cards back:
- Position of the card: the chip should be directed downwards, and the beveled angle should coincide with the shape of the tray.
- Slot order: In hybrid trays, the first slot (closer to the edge) is usually for nano-SIM, the second for microSD or the second SIM.
- Fix: The tray must enter smoothly, without clicking. If you feel resistance, check if the map is skewed.
A common mistake is that users insert microSD into a nano-SIM slot, which causes contact damage.
- 📱 nano-SIM (12.3 × 8.8 mm - always in the first slot.
- 💾 microSD (15 × 11 mm – only in the second slot (if supported).
After you install the tray, turn on your phone and check the network.
- 🔄 Reset the device.
- 📶 Check if Flight mode is on in the notification curtain.
- 🔧 Go to Settings. → SIM-Maps and mobile networks and activate SIM.
Problems in extraction SIM-maps and their solutions
Even with careful action, there can be problems, and let's look at the typical cases and how to fix them:
| Problem. | Possible cause | Decision |
|---|---|---|
| The tray is not moving out. | A hole clogged or a mechanism broke | Clean the hole with a needle (without pressing) or contact the service |
| The tray fell out, but it doesn't fit back in. | Metal frame bent | Make sure to keep the slacks straight (do not overdo it!) |
| The phone can't see. SIM-map | Contacts or incorrect card position oxidized | Clean contacts with a smoother, reinstall SIM |
| The key is stuck in the hole. | The tool is too thick or curved | Use tweezers or contact the service |
If, after extraction, SIM-The card phone stopped turning on, immediately remove the battery (if it is removable) or take the device to the service.
⚠️ Warning: Don't try to disassemble the phone yourself to access the tray.In Xiaomi Redmi models, the slot is soldered to the motherboard, and careless actions will lead to breakage.