How to remove the filter from the vacuum cleaner Xiaomi: instructions for all models

Xiaomi vacuum cleaners are some of the most popular cleaning robots on the market due to their combination of price, functionality and ease of maintenance. However, even such advanced devices require regular maintenance, and one of the key procedures is cleaning or replacing filters. Late maintenance leads to a drop in suction power, engine overheating and even sensor breakdown. In this article, we will discuss how to safely remove the filter from Xiaomi Mi Robot, Dreame and other vacuum cleaners, avoiding typical errors.

It is important to understand that the design of the filter elements may vary depending on the model. For example, the Xiaomi Mi Robot Vacuum-Mop 2 Pro uses a combined version of the filter elements. HEPA-filter with a coal layer, and in budget versions of the Mi Robot Vacuum type 1S — We'll look at the general methods that are suitable for most devices, and also point out the features of specific models.

If you have never taken a vacuum cleaner apart or are afraid of damaging parts, don’t worry: the filter removal process takes no more than 5 minutes and requires no special tools.

Types of filters in vacuum cleaners Xiaomi and their location

Before you start extracting, you need to determine which filter is installed in your model. Xiaomi vacuum cleaners and its sub-brands (Dreame, Viomi) have three main types:

• 🔹 HEPA-filter - a high-performance fine filter that captures up to 99.97% of particles up to 0.3 μm in size, usually located at the top of the dust collector or in a separate compartment.
• 🔹 A wash filter is a mesh or sponge element that can be washed with water. HEPA-filter.
• 🔹 Coal filter – absorbs odors, occurs in models with a wet cleaning function (for example, Dreame Bot) W10). It can be integrated into HEPA-filter or installed separately.

The location of the filters depends on the design of the vacuum cleaner:

• 📍 In Robot Vacuum Cleaners (Mi Robot, Dreame Series) D9) filter is located inside the dust collector, which is removed through the top cover.
• 📍 In vertical vacuum cleaners (Mi Handheld Vacuum, Dreame) V11) filter is located in a cylindrical container behind a removable cover.
• 📍 In vacuum cleaners with aquafilter (Dreame Vacuum-Mop) there can be two filters: dry (HEPA) and wet (for water).

To accurately identify the filter, consult the instructions of your model or look for a marking on the case. HEPA-Filters are often labeled HEPA 11 or HEPA 13, and the washable filters have a characteristic mesh structure.

Preparation for extraction: what to do in advance

Before you get the filter out, follow a few simple steps to avoid contamination of the room or damage to the vacuum cleaner:

1. Turn the vacuum cleaner off. If it's a robot vacuum cleaner, make sure it's not in the charging station. For vertical models, remove the battery or disconnect the cord.
2. Choose a clean workplace. The best way to do this is to do it on a desk covered with a newspaper or napkins. Avoid carpeting, because fine dust can get into the fibers.
3. Prepare the tools: 🧴 Soap solution or dishwashing agent (for washable filters). 🧻 Dry wipes or paper towels. 🔧 Plastic blade or blunt knife (for models with latches). 📸 Phone to photograph the process (in case you need to collect it back).

Check the vacuum cleaner for visible damage

Critically, never remove the filter immediately after cleaning - let the vacuum cleaner cool for 10-15 minutes. The hot air inside the container can warp plastic elements when opened abruptly.

💡

If the filter has not been removed for more than 3 months, wear a medical mask - when opening the dust collector, a large amount of microdust will rise into the air.

Step-by-step: how to pull the filter from the robot vacuum cleaner Xiaomi

Consider the process using the popular Mi Robot Vacuum and Dreame models, and most Xiaomi robot vacuum cleaners are similar in design, so the instruction will fit 80 percent of the devices.

Step 1: Extract the dust collector

1. Turn the vacuum cleaner upwards (buttons to yourself).

2. Press the dust collector lock (usually located at the top of the case, marked with an arrow or inscription) PRESS).

3. Pull the container over, it should come out without effort. If it doesn't, check if the extra latch on the side is snapped.

Step 2: Disassembly of the dust collector

1. Open the dust collector cover by pressing the central latch (usually marked with a lock pattern).

2. Shake the garbage in the bag.Do not use a home vacuum cleaner to clean the container - this can damage its engine.

3. Inside you will see:

• 🔸 Main filter (HEPA or washing, located at the top of the.
• 🔸 Mesh prefilter (if any) – in front of the main filter.
• 🔸 Turbine fan - don't touch it so as not to disturb the balance.

Step 3: Removing the filter

1. Take a plastic handle or protrusion on the filter (usually located on top).

2. Pull the filter vertically upwards. If it doesn't come out:

• 🔹 Check if there are any additional fixtures on the sides.
• 🔹 Slightly twist the filter left-right (some models have threaded mounting).

3. After removal, inspect the filter for damage, if it has ruptures or deformities, you will need to replace it.

Step 4: Clean or Replace the Filter

The action depends on the type of filter:

⚠️ Attention: Never dry HEPA-Dryer filters or battery filters - high temperatures destroy microfibers and the filter will lose its effectiveness. Also, do not use aggressive detergents (for example, Domestos), they can damage the impregnation.

Features of filter extraction in vertical vacuum cleaners Xiaomi

Vertical vacuum cleaners (Mi Handheld Vacuum, Dreame) V9/V11) The filter here is in a cylindrical container that attaches to the main unit. Let's take a look at the Dreame process. V11:

Step 1. Press the Release button on the vacuum handle to disconnect the container from the main unit.

Step 2. Turn the container counterclockwise (when viewed from above) and remove the top cover.

Step 3. Inside you'll see:

• 🔸 Cyclone separator (metallic or plastic mesh).
• 🔸 HEPA-filter - located under the separator, attached to the latches.

Step 4, to get hold of it. HEPA-filter, press the side latchers and pull it up. Be careful - in some models, the filter may be glued to the sealing gum.

In vertical vacuum cleaners Xiaomi often uses a two-stage filtering system:

1. Primary filter (washing) - traps large debris.
2. HEPA-filter - final air purification.

Both filters need to be cleaned regularly, but HEPA-Filter replacement more often.

💡

In vertical vacuum cleaners Xiaomi filter can not be washed under running water – only dry cleaning or delicate wiping with a wet wipe.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make filter removal errors, and here are the most common ones and ways to prevent them:

• 🚫 Use of force in a jammed filter → Solution: Check all the locks, lubricate the rubber seals with silicone lubrication.
• 🚫 Use of sharp objects (knife, screwdriver) for putting the cover → Scratches on plastic or damage to the filter Solution: use a plastic spatula or credit card.
• 🚫 Improper drying HEPA-filter → Solution: Dry the filter in the shade at room temperature for at least 24 hours.
• 🚫 Installation of the wrong side filter → suction impairment or engine overheating solution: Most filters have a label on them. TOP or arrow indicating correct position.
• 🚫 Ignoring the prefilter → fast-wearing HEPA-Solution: Clean both filters at the same time.

Another common problem is that you forget to check the sealing gums after you put the filter in, and if the gum is contaminated or deformed, the vacuum cleaner will lose power, and you'll wipe it with an alcohol wipe before you assemble it.

⚠️ Warning: If the vacuum cleaner starts to work louder or whistles after cleaning the filter, it's likely that the filter is installed incorrectly or damaged.

How often should the filter be cleaned or changed?

The frequency of maintenance depends on the intensity of the vacuum cleaner and the type of filter.

Signs that the filter needs urgent cleaning or replacement:

• 🔴 Reduced suction power.
• 🔴 The appearance of an unpleasant smell at work.
• 🔴 Increased noise or vibration.
• 🔴 The vacuum cleaner begins to "spit" with dust.
• 🔴 On the filter visible traces of oil or soot (characteristic of a faulty engine).

If you use a vacuum cleaner to clean building dust, animal wool or sand, filters get polluted 2-3 times faster, and in such cases, it is recommended to buy replacement filters and keep them handy.

How to buy a replacement and how to choose the right filter

The original filters for Xiaomi vacuum cleaners can be purchased:

• 🛒 Xiaomi official store (mi.com) – quality guarantee, but high price.
• 🛒 AliExpress is a wide range of options, but it's a risk of getting faked.
• 🛒 Amazon, eBay, Wildberries – often have original parts with fast delivery.
• 🛒 Xiaomi service centers – can offer discounts when replacing under warranty.

When choosing a filter, pay attention to:

• 🔹 Vacuum model – Mi Robot Vacuum filters are not suitable for Dreame D9, even if they look similar.
• 🔹 Type of filter — HEPA 11, HEPA 13 or coal.
• 🔹 Article – original filters are labeled (e.g, ZNMS17WM For the Mi Robot Vacuum 1S).
• 🔹 Completing – some kits include pre-filter and sealing gums.

The cost of the original filters varies from 300 to 1500 rubles depending on the model. Budget analogues can be found for 150-500 rubles, but their resource is usually lower. If you doubt compatibility, compare the photo of the original filter with the offer of the seller.

💡

Before buying, check if the warranty period for the vacuum cleaner has expired. In some service centers, filters are changed for free during scheduled maintenance.

FAQ: Answers to Frequent Questions