Xiaomi Mi 6A — It's a popular budget smartphone that was released in 2017, but is still used by many users. One of the common challenges owners face is the need to extract the power of the smartphone. SIM-It would seem a simple operation, but without knowing the nuances, you can damage the tray or the slot itself. In this article, we will analyze all the methods, the appropriate tools and the typical mistakes that are made when extracting a SIM.
The Mi 6A features a hybrid slot that supports either two nano-SIMs or one SIM+microSD. This means that if you pull the wrong tray out of the box or damage the contacts, we will describe the process in detail for both options, as well as give recommendations for choosing tools and caring for the slot.
Preparation for extraction SIM-maps: what you need
Before you start retrieving, make sure you have everything you need. The main tool is a paper clip to remove the tray (company with the phone), if it is not available, alternatives will be suitable, but with caution.
Also check the status of the slot: if the phone fell or got moisture, the contacts could oxidize, in which case the extraction requires special care to avoid damaging the board.
- 📎 Paperclip for SIM-maps (original or analogue)
- 🔦 Lantern (if the lighting is weak)
- 🧴 Alcohol wipes (to clean contacts if necessary)
- 🔧 Tweezers (for gently removing the tray if it is stuck)
- 📱 Spare. SIM-card (to check the operability of the slot after extraction)
If you use a non-original paper clip, make sure that the end is not too sharp - this can scratch the body of the phone.The optimal diameter is 0.7-0.9 mm. Do not use needles, pins or other thin objects: they can break inside the hole.
Where is the slot for SIM-maps in Xiaomi Mi 6A
In Xiaomi Mi 6A slot SIM-The card is located on the left side of the phone (if you look at the screen) and is standard for most Xiaomi models, but some users confuse it with a microphone or speaker hole.
To avoid making a mistake, pay attention to the following signs:
- 🔍 Small circular hole with diameter ~1 mm
- 📏 Located approximately in the middle of the side panel
- 🔄 There are no other technical holes nearby (for example, for a microphone)
If you're not sure, flash a flashlight -- inside the hole, you should see the metal tray mechanism. Some phones next to the slot have a barely noticeable SIM or card icon.
How to distinguish a SIM slot from a microphone hole?
Step-by-step instructions: how to remove SIM-map from Xiaomi Mi 6A
Now, to the process itself, follow the instructions carefully to avoid damage. If the phone is on, it is recommended to turn it off, which will prevent accidental pressing and failure of the communication module.
Algorithm of action:
- Take the paperclip to extract and insert it into the slot hole at a 90 degree angle to the body.
- Press with force until you feel a slight click - this means that the tray has unlocked.
- Carefully pull the tray on yourself, without putting unnecessary effort.
- Extract. SIM-If you use a microSD, remember where it is.
- If necessary, clean the contact box and SIM-wipe-card.
- Put the tray back before clicking (make sure it's up straight).
Important: in the Xiaomi Mi 6A, the tray is asymmetrical — if you insert it incorrectly, it will not lock. Note the bevelled corner — it should match the groove in the phone.
Turn off the phone (recommended)
Check for paper clips
Examine the slot for damage
Prepare a place for SIM-cards (to avoid losing them)-->
Frequent Mistakes and How to Avoid Them
Even with the seemingly simple process, many users make mistakes that can lead to failure, and let's look at some of the most common ones and how to prevent them.
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Use of inappropriate tools (needles, pins) | Damage to the tray mechanism, scratches on the body | Use only a paper clip with a diameter of 0.7-0.9 mm |
| Removing the tray at an angle | The mechanism is broken, the guides are broken. | Pull the tray strictly perpendicular to the body |
| Excessive force application when pressed on a paper clip | Contorted locking mechanism, cracks in the body | Press smoothly, no jerks |
| The tray insertion is not complete | Not fixed. SIM-map, network errors | Make sure to click when installing |
Another common problem is that the tray gets stuck, and if it doesn't come out after you press it with a paper clip, don't try to pull it out with pliers, you better gently swing the tray to the sides, or use tweezers to pull it over the edge.
⚠️ Attention: if the tray is stuck and does not respond, do not use force - this can damage the motherboard.
What to do if SIM-The card is not recognized after extraction
Sometimes after retrieval and resetting SIM-The reason for this is that the phone stops seeing the card, and it can be all sorts of things, from the commonplace contamination of the contacts to the damage to the communication module, and we can figure out how to diagnose and fix the problem.
First, check the following points:
- 🔄 Is it inserted correctly? SIM-map (chip down, beveled corner coincides)
- 🧹 Whether the contacts on the tray are clean and SIM-card (dry alcohol if necessary)
- 📶 Flight mode is enabled (turn it off in the notification curtain)
- 🔄 Restart the phone after installation SIM-map
If the card is still undetectable, try inserting it into another phone – this will help you understand the problem in the phone. SIM-card or slot 6A. If the slot is to blame, it may need to be replaced or contacts repaired.
💡
If the phone can't see SIM-If you have a card that falls or gets moisture, don't try to disassemble it yourself.
Alternative methods of extraction SIM-paper-card
There are times when you don't have a paper clip to pull the tray out, and you can use the tools you can use, but with extreme caution, and the rule of thumb is not to use anything sharper or thinner than a standard paper clip.
Here are some proven options:
- 🖊️ The rod from the gel handle (pre-remove the paste and trim to the desired length)
- 📎 Paper clip (unbend and bite off with clippers to diameter) ~0.8 mm)
- 🔑 Key for screwdriver (small size hexagonal is suitable)
- 🧲 Magnetic holder for screws (if the metal tray is magnetized)
If you use an improvised tool, be sure to check it for strength - it should not bend or break when pressed. also avoid materials that may crumble (such as wooden toothpicks).
⚠️ Warning: When using a magnet, make sure it’s not too strong – it could damage the compass or other phone sensors.
Care for SIM-slot: how to prolong its life
Slot for SIM-The cards, like any mechanical element, require careful handling, and over time the contacts can become oxidized and the locking mechanism wears out:
- 🚫 Do not remove the tray too often without the need.
- 🧼 Periodically (every 3-6 months) clean the contacts with alcohol.
- 💧 Avoid getting moisture into the slot (for example, when using your phone in the bathroom).
- 🔄 Replacement SIM-Check it for scratches or chips.
If you live in a high-humidity region, look for silica gel bags that can be put in your phone case to absorb moisture, and avoid storing your phone in pockets with small change (coins, keys) that can scratch the case near the slot.
💡
Regular cleaning of contacts with alcohol and careful handling of the tray prolong life SIM-Slots and prevent communication problems.