How to take it out properly SIM-Map from the Xiaomi phone: detailed instructions with photos and videos

Extraction SIM-Xiaomi smartphone cards seem like a simple procedure, but in practice, users face typical problems, from jammed trays to damage contacts. In this article, we will analyze all the nuances from tool preparation to actions in emergency situations. We will focus on the differences between Redmi models, POCO and flagship series Mi/Xiaomi, since SIM-The squats may be significantly different.

You will learn how to avoid common mistakes (such as using inappropriate items instead of a key-clip), what to do if the tray is not pushed out, and how to insert the card back correctly. We'll also look at the unique features of hybrid trays in microSD-enabled models, which is critical for owners of devices with limited internal memory. SIM-This card or have been done for a long time, this guide will help to avoid damage to the phone.

Preparation: What will be needed to extract SIM-map

Before you start extracting, make sure you have everything you need. The main tool is the extraction key. SIM-The tray that comes with the phone, and if it's not on hand, there are alternatives, but with reservations.

Here is a complete list of what you may need:

• 🔑 Original key-clip from the set Xiaomi (optimum option)
• 📍 Paperclip or stationery pin (diameter not more than 0.7 mm)
• 🔦 Lantern (for models with a darkened tray opening, for example, Xiaomi 13 Ultra)
• 🧲 Magnet (for cases where the tray is stuck inside)
• 📱 Spare. SIM-card or tray (to check the operability of the slot)

Important: If you use a paper clip, unwind it so that the end is smooth and has no barbs, otherwise you risk scratching the body or damaging the tray mechanism. For models with a hybrid slot (for example, Redmi Note 12 Pro+), also prepare tweezers, which will help to accurately remove the MicroSD if it is installed with the SIM.

Wherever SIM-tray in Xiaomi phones: location by model

In most smartphones Xiaomi tray for SIM-It's on the top or side of the map, but there are exceptions, like some models. POCO It can be down there. If you don't want to look for a hole at random, use the table below.

If your model is not in the table, inspect the phone body: the hole to extract the tray is usually marked by a small dot or SIM icon. In flagship models (for example, Xiaomi Mix Fold 3), it can be hidden under the decorative panel - in this case, you will need to gently tamper with a plastic card.

⚠️ Attention: In models with protection IP53/IP68 (for example, Xiaomi 13T Pro) before extraction SIM-Make sure the phone is turned off, otherwise the waterproof membrane may get damaged and the warranty will be lost.

Step-by-step instructions: how to remove SIM-map

Follow this algorithm to extract the tray without risking the phone:

1. Turn off the phone (required for moisture-protected models!) If you're not sure, put it in flight mode.
2. Insert the key-clip into the tray opening at a 90° angle to the body, press until you click, which means that the mechanism has unlocked.
3. Carefully pull the tray over you. Don't make any effort -- if it doesn't move out, check if the key is fully in.
4. Extract. SIM-a card from a tray, if it is fixed with a latch (as in the POCO X5), Push it sideways.

For hybrid trays (nanoSIM + MicroSD), the procedure is slightly different:

Make sure that the microSD does not block SIM-map

Use tweezers to extract MicroSD (if installed)

Do not touch the gold contacts on the SIM-finger-card

Check the tray for contamination before re-installation-->

If the tray does not extend after pressing the key, do not try to pull it out with pliers! 90% of the time the problem is solved by re-pressing or using a magnet (bring it to the location of the tray inside the phone).

💡

If the key clip breaks inside the hole, don't panic. Take the superglue, drop it on the debris, attach a toothpick to it. After 5 minutes, gently pull it out along with the debris.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when extracting. SIM-Here are the most common ones and how to prevent them:

• 🔧 Use of inappropriate items: Needles, toothpicks or knives can scratch the body or break the tray mechanism. Always use the original key or paper clip with a diameter of 0.6-0.7 mm.
• 💦 Removal with the phone on: In models with moisture protection (for example, Xiaomi) 12S Ultra) can cause moisture to enter the case. Always turn off the device.
• 🔄 Excessive force application: If the tray is not extended, do not push harder, so you can bend it or break the lock. Try pressing the key again or swaying the tray slightly left-right.
• 📱 Loss of tray: In some models (e.g. Redmi) 10C) The tray flies out too easily. Keep the phone over the table, not over the floor.

Pay special attention to hybrid trays. POCO M5s If unsavoryly extracted, the microSD can get stuck under the contacts. SIM-If the phone can't see after it's removed. SIM, check:

• Are there any plastic debris or dust left in the tray?
• Are the contacts not bent on the very SIM-The map (they should be smooth and shiny).
• Is MicroSD installed in reversed form (this blocks the device) SIM-slot).

⚠️ Note: If after removal SIM-The phone gives an error "No network" or "SIM-card is not supported", do not rush to bring it to the service:

1. Reboot the phone.
2. Wipe your contacts. SIM-napkin.
3. Insert the SIM into another slot (if there are two).

What to do if the tray is stuck or broken

If the tray doesn't move after a few tries, don't panic. In most cases, it can be removed without disassembling the phone.

1. Check the key: Make sure it goes fully into the hole. Sometimes users don't insert it fully and the mechanism doesn't work.
2. Use a magnet: Hold a powerful neodymium magnet to the tray inside the phone, and the metal mechanism will be pulled to the magnet, and the tray will extend.
3. Tip the phone: Put the device down on a soft surface and slightly press the tray through the hole. Sometimes it falls out under its own weight.
4. If nothing helps, do not try to disassemble the phone yourself - in Xiaomi models, the tray is attached to the motherboard, and careless actions can damage it.

If the tray broke (for example, a latch broke), it can be replaced. The cost of a new tray for most Xiaomi models is from 200 to 500 rubles. The main thing is to specify the exact model of the phone when ordering, since even devices of the same series (for example, Redmi Note 11 and Redmi Note 11 Pro) trays can differ.

Features of extraction SIM-cardboard

Hybrid trays that support two nanoSIMs or one nanoSIM at a time + MicroSDs require special care, and the main problem is locking slots: if the MicroSD is inserted incorrectly, SIM-The card may not be in contact with the phone.

Here is how to handle these trays correctly:

• 📱 Installation order: First insert nanoSIM (in the slot) SIM1), Then there's the MicroSD, if you need to use two. SIM, The microSD will be removed.
• 🔄 Slot switching: In some models (e.g. Redmi Note 12 Pro) slot SIM2 It can only work with 4G, if SIM1 You have a map installed. Check the settings in the Settings → SIM-maps and mobile networks.
• 🚫 Prohibited combinations: You cannot use two at the same time SIM-Also avoid cards with a capacity of more than 1 TB, they may not be supported.

After installing the MicroSD, the phone does not see SIM-map, check it out:

• Does MicroSD block SIM contacts (sometimes memory cards with a thickened case interfere).
• Is the MicroSD installed upside down (contacts should be directed to the back of the phone).
• Are the contacts in the tray contaminated (wipe them with a swallow or alcohol).

💡

In Xiaomi’s hybrid trays, the SIM1 slot is always the priority. If you care about mobile internet speed, install the main SIM there.

How do you check that SIM-map extracted correctly

After extraction SIM-The cards make sure that:

1. There are no scratches or chips on the card itself (especially on gold contacts).
2. The tray moves smoothly and without jamming during test extraction / installation.
3. The phone does not give out errors when switching on (for example, "SIM-map damaged").

If you have removed the SIM to transfer to another phone, check it on a new device. Sometimes the cards are tied to the phone's IMEI (especially for Tele2 or Yota operators), in which case a support call may be required to unlock.

To check the operability of the slot after extraction:

1. Put the SIM back in and turn on the phone.
2. Go to Settings → About phone → SIM-card status.
3. Make sure that the phone number, IMSI and signal level are displayed.

⚠️ Note: If after removal SIM-The phone has stopped seeing the network, but the card is working on another device, the problem may be in the antenna module, in which case diagnostics are required in the service center (especially for models after a fall or moisture).

FAQ: Answers to Frequent Questions