How to turn off Xiaomi with a broken screen: step-by-step solutions

When a smartphone’s screen fails at the most inopportune moment, it causes panic in any owner. Especially acute problem arises when the device needs to be turned off urgently: for example, the battery is warming, there was a system failure or the phone needs to be handed over to the service center. Owners of Xiaomi, Redmi and Poco often face the fact that the touch touch touch touch touch will cease to respond, and the image may be either completely absent or partially visible.

A broken display is not always a complete inoperability of the gadget, but control becomes almost impossible. The standard method through the lock menu does not work, since the sensor does not respond to touch. In this guide, we will discuss hardware methods of reboot and shutdown that do not require interaction with the display, this will allow you to safely terminate the system without risking damage to files.

There are several proven methods, from simple button clamping to computer utilities, the choice of the specific method depends on the degree of damage to the touch layer and model of your device. Some methods require preliminary preparation, others work out of the box. It is important to act consistently so as not to aggravate the situation with the software part of the smartphone.

⚠️ Warning: If the battery is swollen or smoke is coming out of the case, do not try to turn the phone off by software methods. Immediately remove the device from the case and place it in a safe place, away from flammable objects.

Hardware shutdown with power button

The easiest and most affordable way to get Xiaomi to shut down is to use a physical power button, which works at the hardware interrupt level on most modern smartphone models, so you can ignore the getting stuck operating system, and you need to find the power button, which is usually located on the right or left side of the case.

Press the Power button and hold it for a long time. The standard shutdown menu wait time is 5-7 seconds, but it can take longer to force a reboot or turn off when a screen is broken. Keep your finger on the button for about 10-15 seconds. If the screen is even partially functional, you will see an action menu.

However, if the touchscreen is completely dead, the menu won't help. 20-30 It takes a long press as a critical signal and cuts off the power supply to the main components. It's the most reliable method, without requiring any additional equipment.

• 🔘 Find the power button on your Redmi or Mi case.
• ⏱️ Hold it and hold it continuously. 15-30 seconds.
• 📉 Feel a short vibration, signaling that the command has been accepted.
• 🔌 Release the button when the screen goes out or the device vibrates again.

💡

If a short press doesn't work, try pressing the power button along with the volume button. On some Xiaomi models, this triggers the Recovery menu, from where you can also select Power Off if the touchscreen is partially working.

Use key combinations for recovery

If the usual power button holding is not working, you can try to enter Recovery mode. This is a special diagnostic mode built into the firmware MIUI or HyperOS. Enter this mode is a combination of buttons before booting the operating system, which makes the method effective even with a completely broken display, if the volume buttons are serviceable.

If the phone is on and not responding, wait for the battery to run out first or use the long-term power button clamping method described above to achieve a shutdown. Once the screen is out and the vibration has stopped, you can start the Recovery Mode login procedure.

Press both the power button and the Volume Up button. Hold them until the Mi logo or the Main Menu appears. In this menu, the navigation is done with the volume buttons (up/down), and the selection is with the power button. You need to find the Power Off and confirm the selection. This is guaranteed to turn off the smartphone.

Shutdown via computer and ADB (for advanced)

For users who have previously activated debugging USB In the developer settings, there's a very elegant software method that allows you to control your smartphone from a computer, send system commands, and this is ideal if the buttons on the body are also damaged or crashed, but you can't control your smartphone. USB-port.

You will need a computer with a set of drivers installed. ADB (Android Debug Bridge. Connect your phone to your PC via USB-If the phone is locked but debugging is enabled, the computer can recognize the device. Open the command line or the terminal in the folder with the ADB and enter a command to check the connection.

adb devices

If a device with device status appears on the list, the connection is established. To turn off the phone, the following command is used, which sends a signal to the Android system:

adb shell reboot -p

Alternatively, you can use the command adb shell am start. -a android.intent.action.REQUEST_SHUTDOWN, However, if the screen is broken and you can't unlock the device to confirm access (if required), this method may not work without pre-configured seamless access. -p Often works more aggressively and forcefully.

⚠️ Attention: Method C ADB It only works if you have previously used the phone settings (Settings) → The phone. → Version. MIUI — 7 times, then Settings → Advanced settings → For developers) was activated item “Debugging by USB». Without this step, the computer will not have access to the control.

Full battery discharge method

When no buttons or a computer help, the most primitive, but always working method is natural discharge, and if the phone doesn't turn off, it will continue to consume power until the battery reaches a critical minimum, and then the device will turn off on its own.

To speed things up, you can leave your phone on standby or, if the screen is a little light, leave it on. Some users specifically run heavy apps or videos to speed up power consumption, but when the screen is broken, it's hard to do that. Just leave the gadget alone.

The main risk of this method is the possible deep discharge of the lithium polymer battery. If the phone stays in full zero for too long, the battery can go into sleep mode protection and stop charging without special equipment.

• 🔋 Leave your phone alone until it is completely turned off.
• ⚡ Once the screen is gone, immediately connect the charger.
• ⏳ Do not keep a completely discharged phone for weeks.
• 🌡️ Watch the temperature of the body during discharge.

Connecting external input devices

If the touchscreen is broken, but the image on the matrix is present (you see the picture, but it does not react), you can try to connect an external keyboard or mouse. For Xiaomi smartphones with OTG (On-The-Go) support, this opens up the possibility of controlling without touching the screen.

You're gonna need an adapter. USB to Type-C (or Micro-USB, depending on the model). USB-You can use your mouse to unlock your phone (input a pattern lock or pin if you know it by heart) and press the switch off button on the menu.

This method does not work on all models and versions. MIUI, But on flagships and devices of the middle segment support OTG If the mouse is determined, but the cursor is not, you may need a third-party application that you can't run without the touchscreen, so this method is only effective with a partially working sensor or for input. PIN-keyboard.

Further action and prevention

When you successfully shut down your device, the question is, what do you do next? If your phone is turned off to replace your screen, make sure you use original components or quality analogues. Cheap copies of displays often have problems calibrating the sensor and rendering color.

If you plan to sell a phone with a broken screen for parts, an honest description of the condition in the ad will speed up the deal.Indicate whether the matrix (image), whether the touchscreen is functioning and whether there are spots on the display. It is important for parts buyers to know whether the internal plume and frame are intact.

To protect your data in the future, always set up a backup in Google Cloud or Mi Cloud. In the event of a complete breakdown of the device, you can restore contacts and photos on a new smartphone. Regular backup is the only guarantee that information is safe in case of hardware failures.

⚠️ Warning: When changing the screen yourself, be sure to turn off the battery plume before disconnecting the display plume. Turning on / off the plumes under voltage can burn the power controller on the motherboard.

💡

The fastest way to turn off Xiaomi with a broken screen is to hold the power button for a long time (20+ seconds), which works even when the sensor fails completely.

Frequently Asked Questions (FAQ)