How to turn off Xiaomi without a screen: effective ways

When the display of a Xiaomi smartphone stops responding or goes out completely, it can be taken by surprise.Often, the device continues to work, consuming battery power and heating, which in the long run harms the battery.Users often look for a way to force the system to shut down without relying on touch input.

In this article, we will look at all the proven methods to turn off the gadget, even if the image on the matrix is missing. We will look at both software and hardware solutions available to owners of Redmi and Poco. It is important to understand that some methods require preliminary preparation, which we will discuss below.

If you need to turn off your device immediately, don't panic. There are several layers of operating system control that allow you to execute a shutdown command without using a touchscreen, and the main thing is to act consistently so that you don't damage the file system.

Forced reboot method through buttons

The most affordable and quick way to turn off Xiaomi with a idle screen is to use a physical body keyboard, which emulates battery extraction, which causes the power controller to break the circuit, and you'll need to press the power button and hold it for a long time.

Normally, a standard short tap will trigger the shutdown menu, but without visual control, we can't choose the option. So you use the Hard Reset or Forced Reset method. 10-15 If the device is frozen, it should vibrate and go out.

⚠️ Warning: Long-term retention of the power button may cause some firmware modifications to reset if the volume key is pressed simultaneously.

In some Redmi Note or Mi series models, the combination of buttons may be different. If simple holding didn't work, try slamming the power and volume buttons at the same time. The device should vibrate, signaling to switch to Fastboot mode or turn off.

💡

If the phone vibrates but the screen remains black, wait 30 seconds in a pinched state to make sure the power cycle is completely broken.

Using Recovery Mode to Turn Off

If the system doesn't respond to normal commands, you can try to enter Restore Mode, which is a low-level environment that loads regardless of the main Android interface, and you can get there with a keyboard combination when the device starts.

Turn off your phone (if it's still burning) or wait for it to discharge. Then press the power button and the volume button at the same time. Hold them until the Mi logo appears. In this mode, the touchscreen often doesn't work, but the navigation is done with volume buttons.

Use the audio buttons to navigate the menu, you need to find "Power off" or "Shutdown." Select it with the power button. This is guaranteed to turn off the device, since the command is executed at the core level of the system.

Remote management via ADB and PC

For advanced users who previously had USB debugging enabled, the ideal option would be to use a computer. ADB (Android Debug Bridge) allows you to send system commands directly, which requires drivers and an installed SDK Platform Tools on a PC.

Connect your smartphone to your computer through USB-Open the command line or terminal in the folder with the utility ADB. Type a command to check the connection. If the device is identified, you can send a command to turn off.

adb devices


adb shell reboot -p

The reboot-p command is standard for Linux-based systems and causes the device to go to a power-off state. If this command fails due to access rights, you can try an alternative syntax:

adb shell am start -a android.intent.action.POWER_USAGE_SUMMARY

However, for direct shutdown, the team works best:

adb shell reboot -p

If ADB can not see the device, perhaps on the lock screen was a ban on connecting new USB-And then this method, unfortunately, won't work without prior authorization.

Software Assistants and Mi Cloud

Xiaomi ecosystem services provide remote control capabilities, although the full shutdown function through the cloud is not implemented in all versions of the Mi Cloud. However, you can try using the Find Device feature, which sometimes allows you to lock or restart the gadget.

Go to i.mi.com from any browser. Sign in with your account. If your phone is online and has access to the network, you'll see it on the map. The control menu sometimes has a lock option that indirectly helps if the goal is to stop use.

Also worth mentioning is the Mi Remote app, if it was set up in advance to control the IR port, but it doesn't control the power of the smartphone itself, so the focus should be on local methods or ADB.

Table: Comparison of shutdown methods

To make it easier for you to choose the right option, we have systematized the methods in a table, and pay attention to the preconfiguration requirements for each method.

As you can see from the table, the most universal method is the use of physical buttons. Software methods are good for their accuracy, but require preliminary preparation, which most users may not have at the time of a breakdown.

What to do if the phone is not turned off

There are times when software failures even block the shutdown commands, and in this situation, physical shutdown becomes the only option. If the battery is removable (in older models), just remove it.

In modern monoblocks, Xiaomi will have to wait for the battery to drain completely, and to speed up the process, you can leave the flashlight on (if it catches fire) or run a heavy application by connecting to Wi-Fi.

⚠️ Warning: Do not attempt to open the case yourself to disable the battery plume if you do not have the skills.You can damage the waterproof or break the plume, which will make repairs more expensive.

If the device is heated and dangerous, put it on a non-combustible surface away from flammable objects. After cooling and discharging, take the smartphone to a service center for diagnosis and replacement of the display module.

💡

The most reliable way to turn off a black screen phone is to hold the power button for 15-20 seconds before vibration.

Frequently Asked Questions (FAQ)