How to insert it correctly SIM-Map in Xiaomi Redmi 6: tray, sizes, errors

Xiaomi Redmi 6 is a popular budget smartphone of 2018, which is still actively used due to its reliability. SIM-maps: where the tray is, what size is needed, how to avoid insertion errors. This article will help you understand all the nuances from choosing the right nano-SIM format to solving typical network problems after installation.

Unlike modern models with universal slots, Redmi 6 has a classic hybrid tray that supports either two nano-SIMs or one SIM + microSD memory card. This requires special attention when installing so as not to damage contacts. We will take a detailed look at every step from tool preparation to checking the connection to the network.

Preparation: what size SIM-I need a map for Redmi 6.

The first thing to know is that Xiaomi Redmi 6 only supports nano-SIM (4FF, 12.3×8.8 mm format). If you have a different size card (micro-SIM or mini-SIM), it will have to be cropped or replaced in the operator’s cabin. Using adapters or improperly cropped cards often leads to network loss or slot damage.

Here is how to determine the desired format:

• 🔍 Check the current one. SIM: plastic-based format is usually specified (nano/micro/mini).
• 📏 Compare it to a sample: nano-SIM is the smallest, without plastic framing.
• 🛠️ If you cut yourself, use a template (you can find them on the Internet) and leave a reserve of 0.1-0.2 mm.

⚠️ Attention: Incorrectly circumcised SIM If you are not sure of your skills, it is better to contact the operator for a replacement - it is free while saving the number.

Also note that Redmi 6 has a hybrid slot (Slot 2): you can choose either a second SIM or a microSD card up to 256 GB. You can use both at the same time - this is a hardware platform limitation.

Where is the slot for SIM-maps in Redmi 6

Xiaomi Redmi 6 tray for the first time SIM-The card is located on the left side of the case (if you look at the screen), it is easy to recognize by a small hole for the ejector pin tool. SIM card-pictogram.

Here's how to find him:

• 📱 Take your phone in your right hand with a screen.
• 👈 With your left hand, swipe your finger on the left end - you will feel a slight depression.
• 🔍 In good lighting you will see a metal hole with a diameter ~1 mm.

If you can't find the slot, you may have a cover or a film on your phone that covers the hole. Take off the accessories and inspect the case again. In rare cases, the hole may be clogged with dust -- clean it with a toothpick without pressing.

Step-by-step instruction: how to insert SIM-map

Now, let's get to the process. You're going to need to do this.

• 📌 Paperclip or special ejector pin (goes with phone).
• 📱 Prepared nano-SIM (or two if you don’t use microSD).
• 🔦 Good lighting (so as not to drop the card).

Follow the instructions:

1. Turn off your phone. This is not necessary, but it is recommended to avoid crashes when initializing the SIM.
2. Insert the paperclip into the slot hole and press before you click. The tray will extend 2-3 mm.
3. Carefully pull the tray with your fingers - do not pull the clip so as not to bend the mechanism!
4. Put it down. SIM-card(s: 📱 Slot 1 - The main one SIM (supportive 4G). 📱 Slot 2 - Second SIM MicroSD (or microSD) (select one!).

Make sure the gold contacts look down and the bevelled corner of the card matches the angle on the tray.

Put the tray back in.

Turn on the phone.

The tray is clean, no dust and no debris |

SIM-Card of the correct size (nano)|

Contacts card not scratched |

The sloping corner of the card coincides with the tray |

Phone off (recommended)

-->

If the phone doesn’t see the SIM after turning on, restart it or check the installation correctly (see Typical Errors section).

💡

If the tray is tight, don't push it with force! SIM is probably curved. Take out the tray and check the map's location again.

Common Mistakes and How to Avoid Them

Even with the seemingly simple process, many users make mistakes that lead to loss of network, damage to a card or slot, and here are the most common problems and solutions:

• 🚫 The phone can't see. SIM: Check if the card is inserted correctly (contacts down!). Clear the contacts SIM and a slot with dry soft cloth (no alcohol!) Reboot your phone or turn on/off Flight Mode.
• 🔄 SIM Detected but no network: Make sure the card is activated with the operator. Check network settings: Settings → SIM-maps and mobile networks → Select a network (manually select). If you use two SIM, Make sure that both frequencies are supported (for example, the frequency of the, SIM1 may not work with 4G on some operators).
• 🔧 The tray doesn't fit in until the end: Don't push it with force! Take out the tray and check if something inside the slot is interfering (dust, debris from an old one) SIM). Make sure the card does not protrude beyond the edges of the tray.

⚠️ Warning: If after removing the tray you saw foreign objects inside the slot (pieces of plastic, metal shavings), DO NOT try to pull them out yourself.

Another common problem is the conflict between two SIMs. If one of the cards doesn't work, try swapping them (move from Slot 1 to Slot 2) and also check if SIM Priority for data is enabled in the settings.

How to extract SIM-map if the tray is jammed

If the tray doesn't extend after you press it, don't panic.

1. Check the tool: the paper clip should be thin enough (0.5-0.8 mm). If it is too thick, take a needle or a special ejector pin.
2. Press harder: sometimes the mechanism is tight due to dust. But don't overdo it - if the tray does not move after 2-3 attempts, stop.
3. Use Scotch: Stick a piece of Scotch to the tray (if it protrudes a little). Carefully pull the Scotch parallel to the case.

Contact the service:

Never try to pull the tray out with a knife, screwdriver or other sharp objects – it is almost guaranteed to damage the mechanism or contacts!

Network settings after SIM installation

After successful installation SIM-The card is still set up to connect to the network:

1. Activate SIM: If the card is new, follow the operator’s instructions (usually an SMS with confirmation comes in).
2. Select Network Type: Go to Settings → SIM-maps and mobile networks → [choose SIM] → Preferred network type. For Redmi. 6 best-case — 4G (preferably)/3G/2G.

Set up access points (APN):

• If the internet is not working, check your settings. APN: Settings → SIM-maps and mobile networks → Access points (APN).
• For most operators (MTS, Beeline, MegaFon, Tele2) settings are loaded automatically. If not, add them manually (options can be found on the operator's website).
• Check the priority SIM: If you use two cards, specify which will be the main for calls and the Internet in Settings → SIM-maps and mobile networks → Priority SIM data-data.

If the Internet does not appear after all the manipulations, try:

• 🔄 Reboot the phone.
• 📶 Manually select the operator network in the settings.
• 📱 Insert SIM In another phone to check its performance.

Frequent questions about SIM-maps in Redmi 6

We have collected answers to the most popular user questions:

💡

After installation SIM The phone stopped seeing the memory card, check if you inserted it into the hybrid slot instead of the second one. SIM. In Redmi 6, microSD only works with Slot 2 without a second one. SIM-map.