How do you put it in? SIM-Map to Xiaomi smartphone: instructions for all models (2026)

Introduction: Why the Right Installation SIM-Maps are important for Xiaomi

Xiaomi smartphones are known for their price-quality ratio, but even such devices can cause problems if installed incorrectly. SIM-This not only affects the quality of communication, but also the work of the second SIM (if supported), as well as access to mobile Internet. In this article, we will understand how to insert a SIM in Xiaomi of any model, from the budget Redmi to the flagship Xiaomi 14.

Many users experience typical errors: incorrect position of the card in the tray, using the wrong format (for example, micro-SIM instead of nano-SIM), or even damage to contacts when sloppy installation. We will show how to avoid these problems and quickly configure the smartphone after installing the SIM.

We will pay special attention to models with a hybrid slot, where you can choose between the second one. SIM-And we're going to look at how to activate eSIM on supported devices, and it's becoming more and more popular.

What are they? SIM-The cards support Xiaomi smartphones

Before you insert the SIM, you need to make sure that it suits your Xiaomi. Most modern models use the nano-SIM format (12.3 × 8.8 mm), but there are nuances:

• 📱 Budget models (Redmi) 12/13, POCO M6): usually 2 physical nano-SIM or 1 nano-SIM + microSD.
• 💎 Flagships (Xiaomi 14, Xiaomi) 13T): Can have a hybrid slot or eSIM support.
• ⚡ Older models (until 2018): sometimes require micro-SIM or even mini-SIM (check out specifications).

If you have an outdated SIM-A card (like a mini-SIM from an old phone) can be trimmed to nano-SIM with a special stapler or in the cabin of an operator!

Preparation for installation: what will be needed

Insert SIM-Map in Xiaomi, prepare:

• 🔑 Paperclip or needle (goes with phone to extract tray).
• 📱 SIM-card of the desired format (check if the chip is bent).
• 🔍 Good lighting - the tray is small, easy to drop the sim.
• 📸 Instructions to the phone (if saved) - there may be an installation scheme.

If you have a hybrid slot, decide in advance what is more important: the second one is the first one. SIM-For example, in the Redmi Note 12, you can use either a card or a memory card. SIM2 + microSD, or two SIM, Not all at once.

💡

Before installing the SIM, turn off the phone - this will prevent possible failures in the communication module.

Step-by-step instruction: how to insert SIM-map

Now, to the process itself, follow the instructions to avoid damaging the tray or contacts:

1. 🔌 Turn off your smartphone (optional, but recommended for safety).
2. 📍 Find a slot for SIM-It is usually located on the right end (most models) on the upper end (Xiaomi Mi 11, some of which are not available). POCO). On the bottom end (rarely, for example, Xiaomi Mi Max).
3. 🔑 Remove the tray: Put the paper clip in a small hole next to the slot. Press until you click, the tray will extend 1-2 mm. Carefully pull it on yourself.
4. 📱 Install. SIM-map: Put the SIM in the tray chip down (on most models). Make sure it fits tightly to the stops (usually there is a notch for fixation). If the tray for two SIMs, repeat for the second (note the marking). SIM1/SIM2).

🔄 Put the tray back in:

• Carefully push it until you click.
• Make sure it sits straight - there should be no backlash.
• 📱 Turn on the phone and wait for the network to determine (may take up to 2 minutes).

Features of installation SIM-Maps in popular Xiaomi models

Some Xiaomi smartphones have unique nuances when installing a SIM. Consider the most popular models:

Xiaomi Redmi Note 12/13

These models have a hybrid slot:

• 🔄 We can use it. SIM1 + SIM2 or SIM1 + microSD.
• ⚠️ When installing a microSD, the second SIM switches off automatically.

Xiaomi 13/14 Pro

The flagships support eSIM (virtual SIM):

• 📲 To activate, go to Settings → SIM-maps and mobile networks → Add eSIM.
• 🔐 It will. QR-code from the operator (for example, MTS, Beeline, MegaFon).
• 🔧 Reset network settings: Go to Settings → SIM-maps and mobile networks → Resetting network settings. ⚠️ This will remove stored Wi-Fi passwords! 🛠️ Contact the service if nothing helps — perhaps a slot or antenna module is damaged. If the problem occurred after a phone drop or moisture, do not try to disassemble it yourself — this can lead to loss of warranty. ⚠️ Note: Some of the firmware (e.g., custom) MIUI) There may be no support for two SIM-Make sure you have official software. FAQ: Frequent questions: Can I insert a microSD and two? SIM-No, most models with a hybrid slot will have to choose: either the second one. SIM-The exception is some flagships (e.g. Xiaomi 13 Ultra) where there are separate slots. What to do if the paperclip doesn't push the tray out? Try: Use a thinner, stronger object (like a needle); apply a drop of alcohol into the gap; it can dissolve dirt; go to the service center if the tray is jammed; don't use excessive force; you can break the mechanism; does my Xiaomi eSIM support? Check out the list of supported models: Xiaomi 12/13/14 (All modifications. Redmi K50, K60. POCO F4/F5. Xiaomi Mix Fold 2/3. If your model is not on the list, it only supports physical models. SIM-Do I need to turn off the phone before installing it? SIM-Not necessarily, but recommended. This prevents possible failures in the communication module, especially if the SIM is inserted for the first time or after replacement. SIM-card from another operator on roaming? Yes, but: Make sure the phone is unlocked (not tied to the operator). In network settings (Settings) → SIM-maps and mobile networks) turn on data roaming. Check your carrier's roaming rates, which can be very high!