Xiaomi Redmi 5 Plus is a popular smartphone of 2018, which is still actively used due to the reliable “stuffing” and affordable price. SIM-maps, especially if they used to only deal with devices from other brands. SIM-Redmi 5 Plus card, what types of cards are supported, and what to do if the phone doesn’t see the network after installing.
The main feature of the model is a hybrid slot that allows you to use either two nano-SIMs or one nano-SIM. + This creates confusion among beginners: where and how to insert cards so as not to damage the tray or contacts? We will describe the process in detail, show the location of the slot, and give advice on how to choose the card. SIM-maps and fixing typical problems.
Preparation: which SIM-The cards are suitable for Redmi 5 Plus?
Before installing, make sure you have the correct format. SIM-Xiaomi Redmi 5 Plus supports only nano-SIM (4FF) — The smallest standard used in modern smartphones, if you have an old-style card (mini-SIM or micro-SIM), it will have to be cropped or replaced in the cabin of the operator.
Here are the key requirements for SIM-maps:
- 📱 Format: nano-SIM (12.3 × 8.8 × 0.67 Micro-SIM or mini-SIM will not work without adaptation.
- 🔄 Double. SIM: The slot supports two nano-SIMs (Dual) SIM Dual Standby, but second SIM not working 4G, If the first one is already in use LTE.
- 💾 Hybrid slot: you can choose - or the second SIM, Or microSD (up to 256 GB.
- 🌍 Network support: 2G (GSM), 3G (WCDMA), 4G (LTE). Check that your operator is operating in these ranges.
If you are planning to use two SIM-Note that Redmi 5 Plus does not support Dual VoLTE, which means that when you call actively, you will be able to use one of the cards. SIM The second one will not be available for voice communication (but) SMS Mobile Internet can work).
Where is the slot for SIM-Maps from Xiaomi Redmi 5 Plus?
Unlike many modern smartphones, where the slot is moved to the top or bottom, in Redmi 5 Plus it is located on the left end of the case. This is a typical solution for Xiaomi models from 2017-2019.
- 🔍 The little hole next to the slot is the clip-extractor connector.
- 📏 Distance from buttons: the slot is approximately in the middle between the volume buttons and USB-port.
- 🎨 Color tag: Some versions have a small dot (red or blue) next to the slot, indicating the correct orientation of the tray.
If you can't find the slot, it may be covered with a protective sticker (on new or used devices), gently tuck it with a nail or a plastic card - do not use metal objects so as not to scratch the case.
💡
If there is no paper clip for extracting the tray at hand, you can use an unbended stationery clip, toothpick or even an earring (the main thing is that the tip is thin and does not bend).
Step-by-step instruction: how to insert SIM-map
Now, to the process itself, follow the instructions carefully so that you don't damage the tray or the contacts inside your smartphone.
- Turn off your smartphone.This is not necessary, but it is recommended to avoid accidental pressing or crashing when installing the SIM.
- Take a scraper clip (complete with your phone) and insert it into the hole next to the slot before you click. The tray should move out a little bit.
- Take the tray out of the protruding section carefully. Don't pull it out, it's attached to the guides.
- Put it down. SIM-map(s) in appropriate slots: 📱 SIM 1: upper groove (usually marked as SIM1 slot 1). 📱 SIM 2 microSD: lower groove (marked as SIM2/MicroSD).
Make sure the bevel is on the corner SIM-The card coincides with the bevel on the tray (usually it is in the upper right corner).
Put the tray back in.
Turn on the phone.
Make sure the phone is off | Check the SIM (nano-SIM) format | Combine the bevels on the map and tray | Do not make excessive efforts when inserting the tray-->
If you turn on the phone, you can’t see SIM-map, try restarting the device or slightly moving the tray (sometimes the contacts don't fit tightly).
What if the tray is jammed?
Table: compatibility SIM-MicroSD and cards in Redmi 5 Plus
A common mistake of users is to insert two SIM-In Redmi 5 Plus, this is not possible due to the hybrid slot. Below is a table of possible combinations:
| Configuration | SIM 1 | SIM 2 / microSD | 4G support | Notes |
|---|---|---|---|---|
| Two. SIM-map | nano-SIM | nano-SIM | Only on SIM 1. | SIM 2 works in 2G/3G if SIM 1 uses 4G |
| One SIM + MicroSD | nano-SIM | microSD (up to 256 GB) | Yes. | MicroSD takes over SIM 2 slot |
| Only a microSD. | — | microSD | — | SIM-cards not installed |
| Only one SIM. | nano-SIM | — | Yes. | SIM 2 slot is empty |
Please note that if you use two SIM-maps, automatic network selection 4G You can manually prioritize the network in the settings: → SIM-maps and mobile networks → Mobile network settings → Preferred type of network.
Frequent Mistakes and How to Avoid Them
Even experienced users sometimes make mistakes when installing SIM-These are the most common problems and the ways to solve them:
⚠️ Attention: If after installation SIM-The phone says “No network” or «SIM-The card is not discovered, do not rush to carry it for repair. 90% of the time the problem is solved by rebooting or correctly configuring the network parameters.
- 🔄 Upside down SIM-map: if the card contacts do not contact the tray contacts, the phone will not see it.
- 📶 Incorrect type of network: if 4G It does not work, check in the settings that are selected. LTE (not 3G/2G).
- 🔋 Weak signal: sometimes it helps to turn off and re-enable the aircraft mode (Settings) → Airplane mode).
- 🛠️ Damaged tray: If the tray is dangling or not fixing, the latches may be broken.
Another typical situation: the user inserts a microSD into the slot SIM 1 (top), although it is intended only for SIM-In this case, the phone will not see the memory card, nor SIM, And the tray can jam. Always watch the markings on the tray itself!
💡
If the phone can't see SIM-The card, check it first on another device, and it may not be the smartphone, but the card itself (e.g., it's locked by the operator).
How to activate the second SIM-map?
If you've set two SIM-map, but the second one is not determined, follow the following steps:
- Go to Settings. → SIM-maps and mobile networks.
- Choose the second. SIM-map (usually marked as SIM 2).
- Make sure the switch is turned on SIM-card active.
- Set up the name. SIM-cards (e.g., "worker" or "personal") so as not to confuse them.
- In Network Type, select 4G/3G/2G (auto) or manually specify your preferred standard.
If the second SIM still doesn’t work, check:
- 🔌 Does your operator support operations in the region (some virtual operators do not roam in the region).
- 📡 Not activated on the first SIM regimen 4G (in this case the second SIM may be off).
- 🔄 Is charge saving mode on (it can limit background activity of the second one) SIM).
Care advice SIM-card-and-slot
To avoid problems in the future, follow these guidelines:
- 🧼 Cleaning contacts: once every 6 months, clean the contacts carefully SIM-Do not use abrasive materials and a tray with an alcohol napkin!
- 🚫 Avoid moisture: If the phone is wet, before extraction SIM-Dry it completely (minimum 24 hours).
- 🔄 Regular reboot: If the phone hasn’t turned off for a long time, sometimes a simple reboot helps to “reset” network settings.
- 📦 Storage of spares SIM: If you change cards frequently, keep them in an antistatic bag (for example, from under a new one). SIM).
If you live in a region with unstable coverage, you can turn on the option of Improved Reception in your mobile network settings, which will increase battery life by more aggressive network search, but will help avoid communication breakdowns.
💡
If you travel frequently, consider buying a dual eSIM (although Redmi 5 Plus doesn’t support it). SIM-hotel-card.