Installing legs on a Xiaomi TV is a seemingly simple task, but many users face difficulties: inappropriate holes, backlash mounts or fear of damaging the body. TV 4A/4S/5 Pro, where the design of the legs is different from the classic solutions of Samsung or LG. In this article, we will analyze not only the standard installation procedure, but also the nuances for different series, the selection of tools and typical errors that lead to breakdowns.
It is important to understand that improper leg installation can lead to an unstable position of the TV (risk of falling), damage to the connectors on the back, or even cancellation of the warranty. TV Q1 mi TV 6 use plastic latches that are easy to break with excessive effort, and we will show you in detail how to avoid such problems, even if you have never assembled a technique before.
This article will be useful for both beginners and those who have already tried to install legs, but faced difficulties.
- 🔧 Types of fasteners in different Xiaomi series TV (screws, latches, combined)
- 📏 Leg sizes and compatibility for popular models (32 to 75")
- ⚠️ Mistakes that lead to body failure or thread damage
- 🛠️ The tools that are really needed (and how to replace specialized tools)
1. Which legs are suitable for your Xiaomi model TV
The first thing to start with is to refine the model of the TV. TV 4A 32 won't be good for Mi TV 5 Pro 55" even if they look similar in appearance. The table below shows the compatibility data for the popular series:
| Model TV set | Diagonal | Type of leg attachment | Distance between holes (mm) | Max. weight (with legs) |
|---|---|---|---|---|
| Mi TV 4A | 32"–43" | Screws. M4 (4 pcs.) | 200–300 | 8kg |
| Mi TV 4S | 50"–55" | Latches + screw M5 | 400–500 | 15 kg |
| Mi TV 5 Pro | 55"–65" | Combined (latching) + metal-stap) | 600–700 | 20 kg |
| Redmi Smart TV | 32"–50" | Screws. M4 (plastic insert) | 250–400 | 12 kg |
| Mi TV Q1/Q2 | 55"–75" | Metal staples + bolts M6 | 700–900 | 25 kg |
If your model is not listed in the table, check the configuration - the legs usually come in a box with a TV (in a separate package: L320-W (for 32-inch models) or M550-B (For 55-inch black legs, if the legs are not included, you can order them by the article, which is specified in the instructions for the TV.
Important: In Xiaomi Mi models TV 6 and newer legs can be attached through special metal plates, which first need to screw to the body of the TV, and then install the legs themselves!
Preparation: Tools and safety
Before you start the installation, prepare the workspace and tools.
- 🔨 The cross screwdriver (usually suitable) PH2, But the larger models may be needed. PH3)
- 📦 Soft fabric or towel (to put the TV screen down without the risk of scratching)
- 🧲 Magnet or tweezers (for ease of working with small screws)
- 📏 Line or roulette (to check the symmetry of the setup)
Safety warning:
⚠️ Don't put the TV down on a hard surface! Even a soft table covering can leave micro-cracks on the matrix. Use the original foam-inlay packaging or a thick blanket folded in several layers.
If you have a model with latches (for example, Mi). TV 4S), No additional tools are needed, the legs are fixed by hand, but screw mounts require care: do not pull the screws over so as not to break the thread in the plastic case. Optimal force is when the screw is tightly twisted, but does not creak when turning.
Make sure the legs fit the model and diagonal|
Prepare a soft surface for the TV|
Check the completeness of screws / latches|
Turn off the TV from the network (if connected)-->
3. Step-by-step instructions: how to insert legs into a Xiaomi TV
Consider a universal installation algorithm that works for most models, if your TV has a specific mount (e.g., Mi). TV Q1 with metal brackets, additional steps will be described separately.
Step 1. Put the TV down with the screen.
Carefully place the TV on a soft surface. If you work alone, you'd better put the TV closer to the edge of the table so it's comfortable to fix the legs. Make sure nothing presses on the screen.
Step 2. Combine the legs with the holes
On the back of the TV, find four holes (or two wide latch slots) that are usually symmetrically positioned on the sides. TV 5 Pro and newer holes can be closed with plugs - they must be carefully removed with a flat screwdriver.
Step 3. Hold your legs together.
- 🔩 For screw mounts: Insert the legs into the slots and twist the screws cross-cross (first two diagonal, then the remaining ones.
- 🔗 For latches: Press the leg until you click. Make sure that the latches (usually white or black) are fully inserted into the slots.
- 🔧 For combined mounts: First, fasten the metal plates on the TV body, then screw the legs to them.
Step 4. Check for stability
Carefully lift the TV and put it on a flat surface. Rock it diagonally lightly - if the legs are installed correctly, there should be no backlash. For models 65" and make sure that the legs do not bend under weight (otherwise you need a support stand).
What to do if the screws do not twist?
4. Features of installation for different Xiaomi series TV
Each series of Xiaomi TVs has its own nuances of leg mounting, let's take a look at the most common models.
Mi TV 4A/4S (32"–55")
These models use plastic latches with extra screws, and the main mistake is trying to twist the screws before the latches are fixed.
- Put the leg in the groove to the point.
- Then, press it down to the top to make the latches work (hear the click).
- Then, they will be able to pull the slacks (these are the only ones that will be added).
Mi TV 5 Pro / Q1 / Q2 (55"–75")
Here, the legs are attached through metal plates that are first screwed to the TV body.
- 🔧 Plates must be fixed strictly parallel to each other (use a ruler).
Redmi Smart TV (diagonally)
Redmi budget models often use screws with plastic inserts.
⚠️ Don't use a screwdriver! Plastic inserts are easy to rip, and then the legs will dangle.
💡
If the legs are after the back slats are installed, try putting thin rubber pads under them (you can cut from an old bicycle camera), which will eliminate gaps and prevent scratches on the table.
5. Common Mistakes and How to Avoid Them
Even with the seemingly simple process, many users make mistakes that lead to breakdowns.
Mistake 1: The twisted screws
Screws that are twisted with excessive force can:
- 🔧 To break the thread in the plastic case (especially relevant for Mi). TV 4A).
- 💥 Lead to cracks around the holes (in models with a thin body, for example, Mi). TV 6).
How to avoid: Twirl the screws to the point, but not "to the point plus half a turn." If you feel resistance, stop.
Mistake 2: Mismatching of leg models
Legs from Mi TV 55's not going to be a 65's, even if they look similar:
- ❌ The legs are not fixed in the grooves (too wide or narrow).
- ⚠️ TV is unstable, the risk of falling.
How to avoid: Check the marking on the legs and check the compatibility table at the beginning of the article.
Mistake 3: Ignoring the latches
In models with combined fastening (latches) + Many screws twist the screws without fixing the latches:
- 🔄 Luft legs at the slightest push.
- 💥 The breakdown of plastic fixtures over time.
How to avoid: Always fix the latches first, then twist the screws.
💡
If after installation the legs stagger, do not try to "twirl" the screws - most likely, the problem is incorrect fixation of latches or curved installed metal plates.
6. Alternative fastening methods
If your standard legs are lost or broken, there are several alternatives:
1. Universal legs from third-party manufacturers
Suitable for most Xiaomi TVs with diagonal from 43" to 65".When choosing, pay attention to:
- 📏 Distance between holes (should match your model).
- 💪 Maximum load (for example, 55" TVs need at least 15 kg).
- 🔧 Type of attachment (screws or latches).
Popular brands: VIVO, Mounting Dream, PERLESMITH.
Mounting on the wall (bracket)
If the legs are broken or don't fit, consider a wall-mounted option. for Xiaomi TV fitting support brackets VESA:
- Mi TV 4A/4S (32"–43") — VESA 200×200.
- Mi TV 5 Pro / Q1 (55"–65") — VESA 400×400.
- Mi TV 6 / Redmi Smart TV (50"–75") — VESA 400×600.
Advantages:
- 🔒 Reliable fixation (no risk of falling).
- 📺 Saving space.
- 🔧 Possibility of adjusting the angle of inclination.
3. Homemade coasters
If the legs are lost, and there is no opportunity to buy new ones, you can temporarily use:
- 📦 Wooden bars wrapped in soft cloth (so as not to scratch the body).
- 🖥️ Monitor stand (if diagonal up to 43").
⚠️ Warning: Homemade stands are only suitable as a temporary solution! they do not provide sufficient stability, especially for large TVs.
7.How to take your legs off your Xiaomi TV
If you need to transport a TV or replace your legs, you have to take them off.
For screw anchorages:
- Keep all the stains in your hands (and keep them safe).
- Carefully pull the leg on yourself - it should come out of the groove.
For the latches:
- Find a plastic fixator on the leg (usually located on the side).
- Press it with a screwdriver or nail, at the same time pull the leg up.
For combined anchorages (metal plates):
- First, unscrew the legs from the plates.
- Then unscrew the plates from the TV body.
Tip: If the screws are "stiff" and do not unscrew, moisten them WD-40 Or alcohol and wait 5-10 minutes. Don't use excessive force, it can damage the body.