How to insert batteries into the remote from Xiaomi TV Stick: instructions with photos and life hacks

Remote control from Xiaomi TV Stick is a compact, but critical device that makes it a pain to use a media console comfortably, and a battery is the most common reason why the remote controls stop responding to presses, and users start to panic and sin about a technology failure. In fact, the replacement of batteries takes less than a minute, if you know a few nuances: from the type of batteries to the correct polarity of their installation.

In this article, we will not just show you how to insert batteries into the Xiaomi remote. TV Stick, but also analyze the typical errors (for example, why the remote does not work even after replacing), tell us which batteries to choose for long service, and explain how to reset the remote settings if it “gluts”. And yet – we will reveal the secret of how to extend the life of batteries in 2 times without buying expensive batteries.

Note: the instruction is suitable for all versions of the Xiaomi Mi remotes TV Stick (including 2020-2026 models) and similar Mi Box S and Mi series devices TV Stick 4K. If your remote looks different, check the markings on the back (usually this is the case). MDZ-22-AB origen).

1.What batteries are needed for the Xiaomi remote TV Stick?

Before you run to the store, check the type of batteries that are compatible with your remote. 90% of the time Xiaomi TV Stick is equipped with remotes for two batteries format AAA (They're also called pinkies, but in some regions, like Europe, you might find models with batteries. AAA LR03 — It is the same format, but with an indication of the chemical composition (alkaline).

How do you check for that? Turn over the remote and find a sign on the back next to the battery compartment that says,

• 🔋 AAA 1.5V × 2 - standard version;
• 🔋 LR03 × 2 — alkaline batteries of the same size;
• 🔋 AM4 × 2 — outdated designation, but compatible with AAA.

⚠️ Note: Never use a battery format. AA («Finger batteries) - they are larger and will not fit physically into the compartment. 1.2V instead 1.5V — The remote will work, but the range will be reduced by 30-40%.

And now for brands, the cheap batteries from nameless manufacturers will run out in 2-3 weeks of active use.

• 🏆 Duracell or Energizer – lasts up to 6 months;
• 💰 GP Panasonic – budget option (3-4 months);
• 🔋 Varta High Energy – Best Price/Quality Rate.

An important nuance: if you use a voice-controlled remote (for example, in models with a Google Assistant button), the batteries will run out faster – about 20-25% due to the constant operation of the microphone in standby mode.

2. Step-by-step instruction: how to open the remote and insert batteries

The battery replacement process takes less than a minute, but many users are struggling as soon as the lid is opened.

Step 1. Open the battery compartment.

Turn the remote over with the back of your face. You'll see a lid at the bottom with a small groove. Carefully tuck it in with a nail or a flat screwdriver (don't use a knife, you can scratch the plastic!) The lid will come off with a slight click.

Step 2: Remove the old batteries

If the batteries are not fully dead, they can stick to the contacts. Don't pull them by force, just push one edge of the battery a little bit, and it will pop out on its own. If the batteries leak, clean the contacts with a cotton swab dipped in alcohol.

Step 3: Install new batteries

The key here is to keep polarity, and you'll see the markings in the compartment.

• 🔌 «+» (plus - must coincide with the battery plus contact;
• 🔌 «−» (minus) - respectively with a minus.

Put the batteries in so that their contacts "look" up (to the remote cover). AAA is on the side with a "bulge».

Step 4. Close the lid.

Make sure the batteries are flat and not skewed. Press the lid carefully before you click. If it doesn't close, check if something inside is disturbing (such as a battery label).

⚠️ Note: If the remote does not work after replacing the batteries, check:

• 🔄 Installation Property (turn over the batteries);
• 🔋 Batteries Charged (Maybe They Are Defected);
• 📶 Distance to the console (the remote must be no more than 5 meters).

3.Why does the remote not work even after the battery is replaced?

Situation: You inserted new batteries, but Xiaomi remote TV Stick still doesn't respond to clicks, and there are many reasons, from the banal to the technical:

1.The batteries are discharged or defective

Yes, it happens even with new batteries. Take a tester (or put the batteries in another device) and check the voltage. 1.4V If you have less, you can return them to the store.

Contact oxidation

If the old batteries leaked, the metal contacts inside the remote could have a white or green coating.

• 🧴 Wipe with a cotton swab soaked in vinegar or lemon juice;
• 🧼 Then dry and clean with a swallow;
• 🔌 Check to make sure the contacts are “springed” when pressed.

3. The remote is demagnetized or dropped

Sometimes, after a long period of downtime or battery replacement, the remote forgets the attachment to the console.

1. Bring the remote to a distance of 10-15 cm to Xiaomi TV Stick;
2. Press the Home and Back buttons for 5 seconds at the same time.
3. Wait for the indicator to flash (if any) or just check the work.

4. Interference from other devices

Xiaomi remotes work on Bluetooth Low Energy protocol (BLE), It's a device that might conflict with other gadgets:

• 📱 Wireless headphones;
• 🎮 gamepads;
• 💡 Xiaomi Smart Lightbulbs (if they are on the same network).

4.How to extend the life of batteries in the Xiaomi remote TV Stick?

The average battery life in a remote is 3-6 months, but you can increase it by 1.5-2 times if you follow simple tips.

1. Turn off the remote when you are not using

Hold the Power button for 10 seconds, and that puts the remote into deep sleep, and the energy consumption drops to almost zero, and to wake it up, press any button.

2.Use alkaline batteries

Batteries like this. LR03 (Alkaline) last longer than salt or zinc coal. They're more expensive, but they'll pay off with a rare replacement. Avoid batteries, they lose capacity quickly when recharging frequently.

3. Keep the remote in a dry place

Humidity speeds up the corrosion of the contacts and the discharge of the batteries.

• 🚿 In the bathroom;
• 🌧️ Near the window (condensation is possible);
• 🍵 In the kitchen (steam from a kettle or stove).

4. Disable the voice assistant (if not using)

If your remote has a Google Assistant or XiaoAI button, the microphone runs in the background and consumes a charge.

1. Press the Microphone button for 3 seconds.
2. In the console menu go to Settings → Devices → DU remote;
3. Turn off the voice control option.

💡

If the batteries are gone suddenly and there are no new ones on hand, try to “resuscitate” them: remember a little in your hands or knock on the table (no fanaticism!), this will help redistribute the electrolyte inside and give you another 10-15 minutes of work.

5.Table: Comparison of Xiaomi remote batteries TV Stick

To make it easier for you to choose, we have collected data on popular batteries format AAA. Focus on the ratio of price, capacity and service life:

⚠️ Attention: Cheap batteries (such as Cosmos or Photon) can leak and spoil the contacts of the remote. ₽.

6. Alternative ways to manage Xiaomi TV Stick without remote control

If the remote is broken and the new one hasn't been bought yet, don't despair, you can control the console in other ways. Here are 3 working methods:

1. Xiaomi mobile app TV Remote

Download the official app from Google Play or App Store:

Cons: the delay of pressing can reach 1-2 seconds.

2.The Google Assistant Voice Assistant

If you have a Google Nest column or a smartphone with Google Assistant, say:

OK, Google, turn on Xiaomi TV Stick

Or:

Okay, Google, open Netflix on your TV.

This works if the console is connected to the same Google account as your smartphone.

3. USB-keyboard

Connect to Xiaomi TV Stick through USB-hub:

• 🖱️ Wireless mouse (to navigate the menu);
• ⌨️ Keyboard (convenient for entering passwords).

Any device with support is suitable USB HID.

💡

If you lose a remote often, buy a key fob with a Bluetooth tracker (such as the Xiaomi Mi Smart Tag) and attach it to the remote.

7. Frequent battery replacement errors and how to avoid them

Even in a simple matter like replacing batteries, users manage to make mistakes that lead to a break in the remote.-5 «The squash and how not to repeat them:

1. Use of different types of batteries

Never mix:

• 🔋 Alkaline and salt;
• 🔋 New and old;
• 🔋 Different brands.

This leads to a leak of current and a rapid discharge.

2. Forced closure of the cover

If the lid doesn't close, don't press it.

• 🔄 Are the batteries properly inserted;
• 🧲 Are there any foreign objects in the compartment;
• 🔧 Won't the cap lock bend.

3. Ignoring polarity

Mixed up «+» and «−» It won't ruin the remote, but it won't work. Double check will take 2 seconds, and save you 10 minutes of nerves.

4. Storage of the remote with batteries inside

If you don't use the console for a long time (for example, you've gone on vacation), remove the batteries. They can leak and spoil the contacts.

5. Purchase of batteries "for reserve"

Batteries lose charge even in packaging. Buy them immediately before use, not "for the future."

FAQ: Answers to Frequent Questions