How to turn off Xiaomi phone without a power button: all ways of 2026

A broken power button on a Xiaomi smartphone is one of the most frustrating breakdowns that can completely paralyze a device. You can't turn on the phone, you can't restart it, you can't even go into recovery mode. But don't rush to bring it to the service center: 80 percent of the time, you can start the phone yourself using hidden functions or tools at hand.

In this article, we will discuss 5 proven ways to enable Xiaomi (including Redmi, POCO, Black Shark models) without a power button working – from the simplest charging methods to advanced technical techniques with disassembly of the case. All instructions are relevant for devices on MIUI 12-14 and Android 10-14, including new models from 2023-2026.

Importantly, if the phone is completely discharged or has a damaged motherboard, neither of these things will work, and it will require professional repair, but otherwise, the chances of success are high.

1. Energizing through the charger (the “hard reboot” method)

The easiest and safest way is to use forced reboot via the charging connection, which works if the phone is not fully discharged (the charging indicator burns or flashes when the cable is connected).

Instructions:

• 🔌 Connect your phone to the original charger (preferably with Quick Charge support).
• ⏱️ Wait 10-15 minutes – even if the screen doesn’t respond, the battery can be charged gradually.
• 🔄 Press and hold the volume button (+) In some models, for 20 to 30 seconds (POCO F3, Redmi K40) It's a combination of volume.+ + Loudness–.
• 📱 If the Mi logo appears, release the buttons. The phone should boot in normal mode.

Why does it work? When you connect a charger, the power controller activates a hardware reset that simulates the push of the power button. On models with a Qualcomm Snapdragon processor (such as the Xiaomi 12T), this method works 60% of the time.

Try another charger (better with Quick Charge 3.0+ support)

Connect to the PC through USB-cable (sometimes media recognition is triggered)

Cool your phone (overheating can block the launch)

Try to connect wireless charging (if supported)

-->

⚠️ Warning: If the phone gets hot after charging, but doesn't turn on, it's a sign of a short circuit on the board!

2.Use of ADB-commands (for debugging phones) USB)

If your Xiaomi previously had USB debugging enabled (Settings → About Phone → MIUI Version → 7 times press to unlock Developer Mode), you can turn it on via your computer.

Procedure:

1. Connect your phone to your PC through USB-cable (preferably original).
2. Open the command line (Windows) or the terminal (macOS/Linux).
3. Enter the command to check the connection: adb devices If the phone is determined (the serial number will appear), proceed to the next step.
4. Run the reboot command: adb reboot or forced reboot (if the usual one didn’t work): adb shell reboot -p

If the phone is not identified, try:

• 🔄 Reconnect the cable to another USB-port USB 3.0).
• 🖥️ Install Mi drivers PC Suite or Qualcomm Drivers (for Snapdragon processors).
• 🔧 Enable Fastboot Mode (clamb Volume– + 10 seconds of power).

3. Testpoint closure (TestPoint) - the last method

If the software didn't work, you can try a hardware reset through TestPoint, which is a special pin on the motherboard that simulates the power button being pressed, and it requires disassembling the phone and is only suitable for advanced users!

Instructions for Xiaomi Redmi Note 9/10/11:

• 🛠️ Remove the back cover (use a plastic shoulder blade or mediator).
• 🔍 Find the motherboard and look for the inscriptions TP, Test Point or two non-paying contacts near the battery.
• 📌 Close the contacts carefully with tweezers or screwdriver for 5-10 seconds.
• 🔋 Connect the charger – the phone should start loading.

For other models, the location of testpoints is different:

• POCO X3: Contacts next to the screen plume connector.
• Mi 11: Under a metal screen near the processor.
• Redmi 9A/9C: Two gold pins under the battery.

💡

Before disassembling, take a picture of the location of all the plumes and screws - this will help to collect the phone back without errors.

⚠️ Warning: Incorrect closure of contacts can cause damage to the motherboard or fire! If you are not sure of your skills, you should contact the service. Also remember that disassembling the phone will void the warranty (if it is still valid).

4. Include via service menu (EDL Mode)

Emergency Download Mode (EDL) is a hidden firmware mode that can be activated even on a completely switched-off phone.It works on all Xiaomis with Qualcomm processors (e.g., Snapdragon 720G, 865, 8 Gen 1).

How to log into EDL:

1. Turn off the phone from charging.
2. Hold and hold the volume + volume + volume.
3. Connect. USB-cable to PC (the phone must be disconnected from the network!).
4. Hold the buttons for another 10-15 seconds until the screen is black (but the computer must identify the device as a Qualcomm HS-USB QDLoader 9008).

If the phone entered the EDL:

• 🖥️ Install the Mi Flash Tool program.
• 📥 Download the firmware for your model (for example, from the site Xiaomi Firmware Updater).
• 🔧 In Mi Flash Tool, select Clean All mode and flash your phone.

Once firmware is in place, the phone will automatically restart and turn on, which also helps if the device is stuck on the logo or not booting because of a software failure.

💡

EDL Mode is the only way to bring back a brick (a phone with damaged firmware) but it requires an unlocked bootloader or an authorized Mi Account.

5. Alternative methods: wireless charging, docking station, USB-OTG

If the standard methods don’t work, try the non-obvious solutions:

• 🔋 Wireless charging: some models (Xiaomi Mi) 11/12/13, Redmi Note 11 Pro+) Keep it on through Qi charging. Put the phone on the charging pad and keep Volume down.+ 15–20 seconds.
• 🎮 Docking station: Black Shark phones can be turned on by connecting to a branded docking station (imitates the press of a button).
• 🔌 USB-OTG: plug in through OTG-Adapter keyboard and press Ctrl + Alt + Del (sometimes it works on the POCO F1 Mi 8).
• 🔊 Sound signal: on some models (Redmi) 5/6) lengthy holding+ + Loudness– + charging connection causes vibration and switching on.

These methods don’t work on all devices, but they can be a lifeline if other options aren’t available.

6. When nothing helps: diagnosis and repair

If none of these methods work, the problem may be more serious than it seems:

• 🔋 Damaged battery: If the phone doesn't respond to charging, it's possible the battery is completely drained or swelled.
• 🔌 Faulty power controller: if the charger is heated, but not turned on - this is a sign of a short circuit on the board.
• 💻 Firmware failure: If you upgraded software or obtained root rights before shutting down, a critical bootloader failure could occur.
• 💥 Mechanical damage: Falls or moisture often disable the power button or plume.

In such cases, it is recommended that:

1. Contact the authorized Xiaomi service center (list on the mi.com website).
2. If the warranty expires, find a proven Xiaomi repair wizard (e.g., through 4PDA or MIUI Su).
3. Replace the power button costs 1,500–3,000 ₽, recovery after flooding - from 5 000 ₽.

⚠️ Warning: Don’t trust phone repair shops that offer to “swipe through box” without diagnosis – this can lead to complete data loss or failure of the memory module (eMMC).

FAQ: Frequent questions about Xiaomi powering up without power button