When the beloved Xiaomi Redmi 5A suddenly stops responding to the power button, it can be taken by surprise at the most inopportune moment: the screen remains black, the indicators do not burn, and it feels like the device has turned into a useless piece of plastic. However, in most cases, the problem lies not in the fatal failure of the motherboard, but in a software failure or deep battery discharge that can be fixed on your own.
Before you bring your device to the service center, you should try a number of proven methods of resuscitation that help in 90% of cases of “soft” freezes. Forced reboot and the correct charging algorithm often bring the smartphone back to life without losing data. In this article, we will detail all possible reasons why the Redmi 5A does not turn on, and provide clear instructions for restoring its health.
It's important to understand that MIUI, like any operating system, can sometimes go into sleep with an error, blocking the response of the touchscreen and buttons. If you find that your smartphone does not respond to external influences, do not panic and consistently follow the following steps described below. Proper diagnosis at the initial stage will save you time and money.
Primary diagnostics and verification of food elements
The most common but often overlooked reason for the Xiaomi Redmi 5A’s failure to turn on is its critically low battery charge. If the device was discharged for weeks or months, the chemical processes inside the Li-Ion battery could cause the voltage to drop below the start threshold of the power controller, in which the smartphone may not even show the charging logo immediately after connecting to the network.
First, you need to use an original or certified cable and power supply. Cheap chargers often can't give the necessary current to push a deeply discharged battery. Connect your phone to an outlet and leave it alone for at least 30-40 minutes, even if the screen doesn't show anything. Sometimes the charging indicator lights up only after a long time.
- 🔌 Use only a serviceable micro-USB cable, as wires often break at the base.
- 🔋 Try connecting the device to the computer through USB-The port to check if there is any reaction from the system.
- 🌡️ Make sure the ambient temperature is not too low, as in the cold the battery may temporarily lose capacity.
- 🧹 Clean the charging port of dust and pile, gently using a wooden toothpick or compressed air.
⚠️ Attention: If during a long charge the device body began to heat up strongly or the battery swelled (back cover has moved), immediately disconnect the smartphone from the network.
If the Redmi 5A is still silent after an hour of charging, move on to the next step. It is important to rule out mechanical damage: if the phone fell or came into contact with water, the problem may be in the hardware, and software methods will not help.
The method of forced reset (Hard Reset buttons)
The most effective way to revive a frozen Xiaomi is to perform a hardware reset that forcibly shuts down the power and starts the system again, a procedure that is safe for your data (photos, contacts, applications), since it does not affect internal memory, but only resets the state of RAM and controllers.
To do this, the Redmi 5A requires you to press the power button and hold it for a long time. A standard short press may not work if the processor is stuck in a cyclic error. You need to be patient and keep your finger on the button for 10 to 20 seconds, without letting it go, even if nothing seems to be happening.
☑️ Checking before rebooting
In some cases, if a simple power button doesn't help, a key combination is used. Try to press the Volume Up and Power buttons at the same time. Hold them until the vibration or Mi logo appears. If the screen flashed and went out again, repeat the procedure again, perhaps the timing of the press was wrong.
- 🖱️ Press the power button and hold it for at least 15 seconds.
- 📳 The palpable vibration will confirm that the power controller has received a start signal.
- 🔄 If the Mi logo appears, release the button and wait for the system to boot.
- 🔁 If you don’t have a reaction, try the Volume Down combination. + Nutrition.
This method helps in most cases when the system has gone into oblivion after installing a problematic application or update. Hardware reset is a regular feature of any Android device and is designed for such situations. Don't be afraid to press buttons with effort, but without fanaticism, so as not to damage the key mechanisms.
Enter Recovery and Fastboot Mode
If standard methods have failed, it’s worth checking whether the Xiaomi Redmi 5A responds to low-level boot modes. Recovery mode allows you to reset settings or clear the cache, and Fastboot is designed to flash the device through the computer.
To enter Recovery, turn off the device (if it's on) and press the Volume Up and Power buttons at the same time. Hold them until the logo appears, then release the power button, while continuing to keep the volume. You should see a menu with a black or gray background, where the control is done by the volume buttons and the choice is by the power button.
Description of Recovery menu items
Fastboot is activated by pressing the Volume Down and Power button, and if a rabbit fixing a robot or a FASTBOOT sign appears on the screen, the phone hardware is functioning correctly and the problem lies in the software or damage to system files.
| Regime. | Button combination | Appointment | Appearance |
|---|---|---|---|
| Recovery | Volume Up + Nutrition | Reset, upgrade, cleanup | Menu with text |
| Fastboot | Volume Down + Nutrition | Firmware through PC | The hare with the robot |
| Safe Mode | Through the Recovery menu | Diagnostics of applications | Inscription Safe Mode |
| Power Off | Through the Recovery menu | Shutdown | Black screen |
If the phone is in these modes but not booting into the normal system, it is recommended to perform a cache cleanup (Wipe Cache Partition).This action is safe for personal files. If this does not help, you may need a full reset (Wipe All Data), but this is an extreme measure that deletes all data.
Problems with the display and touch screen
Sometimes the Redmi 5A actually turns on, but the user doesn't see it because of a malfunction in the display module.The phone can vibrate when ringing, make notification sounds, or respond to volume buttons while remaining visually black, in which case the screen matrix or display plume can be damaged.
You can test the broken display hypothesis by calling the SIM card number installed in the problem device, and if it's a beep, and then the call sound, but the screen doesn't light up, the problem is that it displays information, and you can also connect the phone to a computer, so if the PC makes a sound of the new device connecting, then the motherboard is alive.
- 🔦 Light a flashlight close to the screen when turned on: sometimes a dim backlight of the logo is visible.
- 🔊 Listen to the Dynamiku: Loading Sounds MIUI It is often heard even on a black screen.
- 📳 Feel the vibration: the response to the call confirms the system.
- 💻 Connect to a PC: the appearance of the device in the Device Manager is a good sign.
⚠️ Warning: If the phone responds to commands but the screen is black, don't try to disassemble it yourself without skills.Display plumes in Redmi 5A Fragile and careless intervention can lead to final breakdown.
If the screen problem is confirmed, the only solution is to replace the display module. 5A The components are available and inexpensive, and you can use your phone before you replace them. USB-mouse-wise OTG-Adapter if you have support or just taking calls.
Software and firmware failures
One of the common reasons Xiaomi doesn’t turn on is that it can damage the Android operating system files after a failed update, interrupted data writing process, or interference with the system partition (root rights, modifications), in which case the phone may hang indefinitely on the logo (bootloop) or not react at all.
If the device is in Recovery mode, try selecting Wipe Data/Factory Reset, which will return the phone to factory status, remember that all your data will be destroyed, and if the phone turns on normally after the reset, then the problem was a software conflict or a database corruption.
In more complex cases, when Recovery does not help or is not available, you need to flash the device through your computer using the Mi Flash Tool utility. To do this, you need to download the official firmware for Redmi 5A (codename rg) and transfer the phone to Fastboot mode.
- 💾 Download the current firmware from the official website MIUI.
- 🖥️ Install the drivers. ADB and Fastboot on the computer.
- 🔌 Connect your phone in Fastboot mode to your PC.
- 🚀 Launch the Mi Flash Tool and choose the path to the firmware.
The flashing process takes 5 to 15 minutes. It's important not to turn off the cable at this time. If the firmware is successful, the phone will automatically restart. If the process ends in error, this may indicate problems with eMMC memory or other hardware components.
Hardware malfunctions and when to go to the service
When all software methods are exhausted and the phone still shows no signs of life, there is a high probability of hardware failure. In Redmi 5A, as in any technology, capacitors, memory chips or the processor itself can fail over time.
The power button is a common disease of budget models, and if the button is "flagging" or stopped clicking, the phone doesn't physically get the power button, and you can temporarily fix the problem by gently pressing the button area or cleaning it with alcohol, but you'd better replace the button.
💡
Diagnostics of the power button: Drop a drop of isopropyl alcohol on the power button and quickly press it several times, which can clear the contacts inside the mechanism and temporarily return to operation.
If the phone fell, the battery plume or the display could have gone away. Opening the back cover (it's not removable in the Redmi 5A, but it's removed after heating) will allow you to visually assess the condition. However, if you're not sure about yourself, it's better not to risk it. Short circuits with a sloppy battery connection can finish the motherboard.
| Symptoms. | Probable cause | Difficulty of repair | Decision |
|---|---|---|---|
| No reaction, warm up. | CZ in the food chain | Tall. | Service centre |
| Vibration's on, screen black. | Display malfunction. | Medium | Screen replacement |
| Hanging on the logo. | Failure of the | Low. | Flip-flashing |
| Not holding the charge. | AKB wear and tear | Low. | Battery replacement |
In situations where soldering or replacement of chips is required, the only reasonable step is to seek a dedicated service. Self-repair without experience and tools can lead to complete disposal of the device. The cost of repair should be compared with the market price of a used Redmi 5A.
Prevention and proper operation
To avoid a repeat of the situation when Xiaomi Redmi 5A does not turn on, it is recommended to follow simple rules of operation.Renew the system regularly, but only through official channels.Do not allow a deep battery discharge: put the phone on charge when the energy level drops to 15-20%.
Use protective accessories. A cover and protective glass can save the device in a fall, which often causes the plumes to leave. Also avoid extreme temperatures: do not leave the phone in the sun in the winter or summer in the car, as lithium-ion batteries are sensitive to overheating and hypothermia.
💡
Regularly restarting your smartphone (once a week) helps to clear your RAM and prevents the accumulation of system errors, reducing the risk of freezes.
Periodically check the state of the charging port and clean it of dust. Moisture or dirt trapped in it can cause corrosion of contacts, which will lead to problems with charging and on.