How to turn on Xiaomi phone: instructions for all models

Turning on a Xiaomi smartphone seems like a simple task — just press the power button. But what to do if the phone does not respond? Or how to turn on the device after completely discharging? In this article, we will analyze all possible scenarios, from standard on to solving emergency situations.

Manufacturer produces smartphones under several brands – Redmi, POCO, Mi and Black Shark, although they have different externalities, have the same switching algorithm, except for devices with physical breakdowns (such as a faulty power button).

We will focus on models with fast charging — they have nuances when turned on after deep discharge, and consider how to turn on Xiaomi without a power button and what to do if the screen does not respond to presses.

Standard phone inclusion Xiaomi

For most users, the power-on process is limited to one action, pressing the power button, but even here, there are nuances that depend on the state of the device.

The power button on Xiaomi smartphones is usually located on the right side of the phone. POCO F5 And the Redmi Note 12 is paired with a fingerprint sensor, and on older devices (like the Mi 8), the button can be a separate button.

Standard inclusion algorithm:

• 🔋 Make sure your phone is charged (minimum 5% battery).
• 🔘 Press and hold the power button. 2-3 seconds.
• 📱 Wait for the logo to appear. MI or Redmi.
• 🔓 If necessary, unlock the screen (PIN, pattern lock, print).

If the phone has been off for a long time (more than a day), the first turn on can take up to 30 seconds - this is normal. AMOLED-screens (for example, Xiaomi 13 Ultra) download can be accompanied by animation.

Incorporation after full discharge

Deep discharge is one of the most common reasons why Xiaomi doesn't turn on the first time.The manufacturer recommends avoiding a discharge below 3%, but if it has already happened, follow the instructions:

Connect the phone to the original charger (better use the power supply from the kit). on Redmi Note models 11 And newer in deep discharge may be required 5-10 minutes of charging before switching on.

Signs of successful charging:

• 🔌 On the screen appears the charging indicator (lightning in the battery).
• 🔥 The phone is slightly heated in the camera area.
• 📊 In 5 minutes, you can try to turn on the device.

If after 15 minutes of charging the phone does not show signs of life, try:

1. Use another charger (at least 18 watts).
2. Connect the phone to the computer through USB-cable.
3. Press and hold the power button 10-15 seconds (resetting power).

On Xiaomi models 12T And then, in a deep discharge, the power controller protection can work, and in this case, the phone will not turn on until the battery is charged to at least 10%.

Powering without power button

If the power button is broken or doesn't respond to presses, you can turn on Xiaomi in alternative ways. Importantly, these methods only work if the battery is charged.

Method 1: Through the charger

• 🔌 Connect your phone to charge.
• 🤳 Double pressing the volume button (works on Redmi 9 and later).
• 🔄 If it doesn’t work, try the combination Loudness.+ + Loudness- (hold 5 seconds).

Method 2: Through the computer (ADB)

This will require:

1. Included debugging by USB (adjusting to the settings → The phone. → Version. MIUI — 7 times to activate the developer mode).
2. Installed Xiaomi drivers and program ADB PC-only.
3. A phone connected to a computer.

adb shell input keyevent 26

This command simulates the pressing of the power button.

Check the battery charge (minimum 20%)

Connect the original USB-cable

Make sure that the phone is on debugging. USB (if you plan to use it ADB)

Use button combinations only on a charged device

-->

Black Shark models have an additional physical Shark Space button, which can sometimes be turned on for 5 seconds by holding it.

Addressing inclusion issues

If Xiaomi doesn’t turn on despite all attempts, the problem could be hardware or software.

Symptom: The phone vibrates when you press the power button, but the screen remains black.

Possible causes:

• 💥 Display plume damaged (often after falls).
• 🔋 Failed battery (swelling, short circuit).
• 🤖 Firmware failure (for example, after a failed update).

Symptom: The phone heats up when charging, but does not turn on.

This may indicate:

• 🔥 Short circuit in the food chain.
• 🔋 Failure of the charging controller.
• 💧 Moisture intake (on models without protection) IP53).

Diagnostic table:

On models POCO X3 And Redmi Note 10, a common problem is the oxidation of the battery contacts, and if the phone stops turning on after getting moisture, it needs to be immediately disconnected from the power supply and dried in rice (at least 24 hours).

💡

If the phone doesn't turn on after a fall, don't try to disassemble it yourself. Xiaomi has many models with adhesive housing, and a careless autopsy can damage the plumes.

Features of inclusion on different models

Despite the common platform, some Xiaomi models have unique inclusion features, which are due to different hardware and firmware.

Black Shark models (gaming smartphones):

• 🎮 Have an additional Shark Space button to enable game mode.
• 🔋 Supports ultrafast charging 120W — deep discharge requires 10-15 recharge.
• 🔄 Have a separate Performance Mode that can block normal onset.

Models. POCO F and POCO X:

• 🔋 They use high-capacity batteries (5000-6000 mAh) that charge longer after deep discharge.
• 📱 Have the function of LiquidCool – when overheating, the phone may not turn on until cooling down.
• 🔘 The power button is often paired with a fingerprint sensor, which can cause false positives.

Mi Mix models (frameless):

• 📱 Have a fingerprint scanner under the screen – sometimes it blocks the turn on.
• 🔋 Use a wireless charging system that can conflict with wired.
• 🔊 The speakers are located at the bottom - when water hits, they can shorten, blocking the turn on.

Xiaomi. 12S Ultra and 13 Pro has Hibernation, which is a deep sleep that saves power, and to get your phone out of that mode, you have to hold the power button. 8-10 seconds.

What to do if the phone is stuck when turned on

Hanging on the logo MI or Redmi, a common problem, especially after updates, 80 percent of the time, it's software-based.

Solutions:

1. Hard Reboot: Hold the Power button 15-20 seconds before vibration.
2. Recovery mode: pinch the power + Loudness+ 5 seconds. Select Reboot from the menu.
3. Reset to factory settings: in Recovery, select Wipe Data (deletes all data!).
4. Fastboot Firmware: Requires a PC and official firmware from Xiaomi’s website.

If the phone freezes after the update MIUI, try:

• 🔄 Reverse to the previous version through Recovery.
• 📥 Download the full update package and install it manually.
• 🔧 Clear the cache in Recovery (wipe cache item).

On models with a Snapdragon processor (for example, POCO F3) It can be caused by overheating, so you need to let the phone cool down. 10-15 minutes before retrying the switch.

💡

If the phone has got stuck after installing custom firmware, it can be brought back to life only through Fastboot with official software.

Prevention of inclusion problems

To avoid problems with Xiaomi inclusion, follow the simple rules:

1. Battery:

• 🔋 Don't unload your phone below 10%.
• 🔌 Use only original chargers.
• 🔥 Avoid overheating (do not leave in the sun, do not play heavy games when charging).

Software:

• 🔄 Update regularly MIUI through settings → Updating the system.
• 📱 Do not install firmware from third-party developers.
• 🔧 Periodically clean the cache in Settings → Warehouse → Cleanup.

Physical security:

• 💧 Avoid getting moisture (even on models with the IP53).
• 📦 Use covers to protect against impacts.
• 🔌 Clean regularly USB-dust port (by toothpicking or compressed air).

In the models with AMOLED-With screens (e.g. Xiaomi 13) avoid long-term display of static images – this can lead to burn-in (pixel burnout), which in rare cases blocks the inclusion of static images.

If you frequently encounter spontaneous reboots, check your phone for viruses through Security. → Scanner: Some malware can block normal system load.

FAQ: Frequent questions about Xiaomi inclusion