Why it’s important to know the exact Redmi model – and where it comes in handy
Have you ever tried to find a case or accessory for your Xiaomi Redmi, but the seller asked you to name the exact model - and you didn't know what to answer? Or the phone started to glittle, and the service center asks: "Redmi Note 11 Pro 5G or just Note 11?"
The definition of a model is not just a formality.
- 🔧 Parts compatibility (screen, battery, camera)
- 📱 Correct firmware (incorrect version can "brick" the phone)
- 🔋 Selection of charger (power depends on the model)
- 🛡️ Warranty service (serial number tied to model)
For example, the Redmi Note 10 Pro and Redmi Note 10 Pro Max are almost identical in appearance, but have different cameras and processors. And the Redmi 9A was released in 4 versions — with different memory capacity and support for NFC. Misdefining the model can cost money or even the device's performance.
In this article, we'll look at all the possible ways, from the obvious (see the box) to the exotic (through the engineering menu), even if the phone doesn't turn on or lock, you'll find a solution.
Method 1: Sticker on the box or phone
The easiest method is to inspect the original package. On the back of the box, Xiaomi always points out:
- 📦 Full name of the model (for example, Redmi Note 12 Pro)+ 5G)
- 🔢 Serial number (IMEI)
- 📡 Network support (4G/5G, quantity SIM-map)
If there is no box, check the sticker under the removable lid (on models with a removable battery) or on the tray for the car. SIM-On the new Redmi (like Note 13 Pro), the model can be engraved on a metal frame under the camera – take a closer look in good lighting.
⚠️ Note: Fake Xiaomi (especially from unofficial stores) stickers are often forged. If the model on the box and in the settings does not match - this is an occasion to check the phone for originality through the phone. IMEI.
If you buy a handheld phone, ask the seller to send you a picture of the box before you buy it, which will help you avoid cheating on the model. For example, scammers often give the Redmi 9C for the Redmi Note 9 Pro, although these are completely different devices in price and characteristics.
Method 2: Through phone settings (if enabled)
If the phone is working, the most reliable way is to look at the system settings. Open: Settings → About the phone → Device model
Here you will see the full name, for example:
- 2201116TI is Redmi Note 11 Pro 5G (global version)
- 2201116TG is the Redmi Note 11 Pro+ 5G (for India)
- 22101316C is a Redmi Note 12 Pro 4G
But what if instead of the usual name, you see a code name (for example, vili or fleur)? These are internal Xiaomi names that can be decrypted through special services. We will discuss them in detail in the section on code names.
RAM | MIUI | Assembly number | Device code name (if any)
-->
If the About phone section is hidden (for example, on custom firmware), try an alternative path: Settings → System → About the device → Model
Method 3: Use USSD-codes (works even without codes) SIM-map)
USSD-Codes are universal commands that work on any Xiaomi Redmi, regardless of the version. MIUI. The most useful for determining the model:
| Code. | What shows | Example of response |
|---|
| ##4636## | Phone and battery information | Model Number: 2201116TI |
| *#06# | IMEI and serial number | IMEI: 861234567890123 |
| ##225## | Calculator (but shows the model in the status bar) | Redmi Note 11 Pro 5G |
| ##6484## | Equipment test (a model is displayed at the top of the screen) | Device: fleur (codename) |
After entering the code, the model can be displayed:
- 📱 At the top of the screen (near the charge level)
- 🔍 In the Hardware Information section
- 📝 In the list of parameters (look for the lines Model or Device)
⚠️ Note: On some firmware (for example, MIUI 14 for the European region) code ##4636## may not work. In this case, use the alternative code ##64663### - it opens a menu with detailed information about the hardware.
If nothing happens after entering the code, check:
- 🔄 Correctness of the set (symbols * and # must be in place)
- 📶 Network availability (on some phones codes only work with the SIM-card)
- 🔧 No blocking of the engineering menu (relevant for corporate devices)
Through settings |Box |USSD-codes |Special applications |I don't know how to check
-->
Method 4: Decoding Xiaomi codenames (vili, fleur, rosemary, etc.)
Xiaomi assigns each device an internal code name, which is often displayed in the engineering menu or when checked through ADB.
- vili — Redmi Note 11 Pro 5G
- fleur — Redmi Note 11 Pro+ 5G
- rosemary — Redmi Note 10 Pro
- olive — Redmi 9
To decipher the code name:
- Find out through the code ##6484## or in Settings → About Phone → Version of the kernel (look for the word after ro.product.device=).
- Check out the official Xiaomi database: 🌐 List of code names on the site MIUI 📄 Xiaomi Firmware Updater Database
If the code name is not found in the databases, try Google it with the addition of the word Xiaomi codename. For example, if you request fleur Xiaomi codename, the first link leads to a page describing the Redmi Note 11 Pro+ 5G.
Why does Xiaomi use code names? Code names (e.g., vili, fleur) are assigned during the development phase and used by engineers for convenience, and they remain in the firmware even after the device is released. Sometimes a single codename corresponds to several models for different regions (for example, vili is also Redmi Note 11 Pro). 5G for Europe and the Redmi Note 11E Pro for China). --> Method 5
Po Po Po IMEI (It works even on a locked phone) IMEI — It's your phone's unique identifier, and you can use it to identify the model, even if the device isn't turning on. IMEI: 📱 On your work phone: enter *#06# - the number will appear on the screen. 📦 On the box: look for a barcode sticker (usually listed below). IMEI). 🔋 Under the battery: on models with a removable lid (for example, Redmi) 9A). 💻 By computer: connect your phone in Fastboot mode and type in the command: fastboot getvar imei When IMEI Known, check the model through: 🌐 IMEI.info (shows model, year of release, specifications) 🔍 IMEI24.com (Provides expanded information, including the region) 📱 Annex MIUI Tools (available on Google Play) ⚠️ Attention: If during the inspection IMEI The service shows a model that does not match the inscription on the box (for example, Redmi Note 10 instead of Redmi Note 10 Pro), this is a sign of a fake or a cross-stitched phone. IMEI This allows you to identify not only the model, but also the region of the phone (eg Global, China, India), this is critical when choosing a firmware - installing the wrong version can block the network or camera. Method 6: In the engineering menu (for advanced users) If standard methods don't work, you can check the engineering menu (Engineer Mode), which contains detailed information about the hardware, including the model and the version of the board. To open the engineering menu: Enter the code ##3644633## or ##4636###. Go to Hardware Testing or Device Information. Look for the lines: Model Number — the full name of the Hardware Version model — the board version (for example, the model number is the full name of the hardware version, V13.0.1.0.SKCMIXM) RF Band - Supported frequencies (helps distinguish between different frequencies) 4G from 5G) The engineering menu can also be checked: 🔋 Battery status (Battery Information section) 📡 Network signal power (Network Testing section) 🎯 Sensor Testing: Be careful: changing the parameters in the engineering menu can lead to loss of warranty or unstable operation of the phone. Do not change settings if you are not sure of their purpose! Method 7: Special applications (for automatic determination) If you do not want to dig into the settings, use applications that automatically determine the model and characteristics: App What shows the link CPU-Z Model, processor, memory, sensors Google Play AIDA64 Full specifications + Google Play Performance Tests MIUI Tools Model, Region, Version MIUI, Google Play Device Info codename HW Model, IMEI, Serial number, date of production of Google Play Advantages of applications: 🔍 Show hidden parameters that are not visible in the settings (e.g., production date, region). 📊 Compare the characteristics with other models. 🔋 Testing performance and battery condition: 📱 Require installation (not suitable if the phone is not turned on). 🔒 Some apps ask for unnecessary permissions (e.g. access to contacts). 💡Annex MIUI Tools is the best choice for Xiaomi owners, as it shows unique parameters such as the firmware region and supported networks. 8: By external signs (if the phone does not turn on) If the phone does not respond to charging or is blocked, you can determine the model by external signs: 📸 Camera Location: Redmi Note 12 Pro+ — 3 camera + sensor in a round frame. 10A — One camera in the middle. Redmi Note. 11S — 4 rectangular. 🔋 Charging connector: USB-C — all-model 2020 Redmi Note of the Year 9 Micro-USBs are old models (Redmi). 8A, Redmi 7). 📱 Screen size and shape: Screen with a cutout ("drop") - Redmi Note 10/11. Screen with a central hole ("hole") - Redmi Note 12. Flat screen without curves - budget models (Redmi) 9A, Redmi 10A). 🔊 Location of speakers: Stereodynamics (top) + bottom) - Redmi Note 11 Pro+. One speaker (bottom) - budget models (Redmi) 9C). To be precise, take a picture of your phone from different angles (especially the back). Upload it to Google Lens, which often recognizes the model. Compare it to the photos on Xiaomi's official website. ⚠️ Note: Some Redmi models are identical in appearance, but have different characteristics. For example, the Redmi Note 10 Pro and Redmi Note 10 Pro Max differ only in the inscription on the camera and the amount of memory. IMEI. Frequent Errors and How to Avoid Them When defining a Xiaomi Redmi model, users often face typical problems: 🔄 Put Redmi around and POCO: Brand POCO Xiaomi owns it, but it's different, POCO X3 Pro and Redmi Note 10 Pro have similar specs, but different firmware and updates. 🌍 Ignoring region: The same model may have different indexes for different markets: Redmi Note 11 Pro 5G (global) — 2201116TI Redmi Note 11E Pro (for China) — 2201116TC 🔋 Not to mention modifications: For example, Redmi 9 graduated 4 variants: Redmi 9 (3/32 GB, lancelot Redmi 9 (4/64 GB, lancelot Redmi 9 (4/128 GB, lancelot Redmi 9 NFC (4/128 GB, lancelot_nfc) To avoid mistakes: 🔍 Always check the model at least once. 2 in ways (e.g., by box) + via settings). 📱 If you buy a phone with your hands, ask the seller to send a screenshot from Settings. → The phone. 🔋 When buying accessories, specify the exact modification (for example, Redmi Note). 11 Pro 5G 6/128 GB). FAQ: Can you identify a Redmi model by a serial number? Yes, but not directly. Serial number (S/N) It does not contain any information about the model, but it can be used with IMEI It's also useful for checking the warranty on Xiaomi's official website. Why does the settings display a code name (vili, fleur) instead of a normal name? MIUI To see the familiar name of the model: Go to Settings → The phone. → Version. MIUI. Put a few taps on the kernel version line. In the menu that opens, find ro.product.model, which will have the full name. 11 Pro by Redmi Note 11 Pro 5G? These models are almost identical, but there are key differences: 📡 Redmi Note 11 Pro only. 4G, Helio G96. 📡 Redmi Note 11 Pro 5G — support 5G, Snapdragon processor 695. 🔋 Note 11 Pro 5G has a faster charging (67W against 33W). 📸 The Note 11 Pro Camera 5G — 108 MP (y) 4G-The exact model can be identified by the code name: vili (5G) peux (4G). What if all the ways show different patterns: 🔧 The phone will be reflashed with unofficial firmware (for example, with the Redmi Note 10 on the phone). POCO X3). 🛠️ The device is made of different parts ("Frankenstein"). 🎭 This is a fake for Xiaomi (often found in Redmi models). 9A, Redmi 8A). In this case: Check it out IMEI Compare the serial number to the data on the box. Contact Xiaomi's service center for diagnostics. Can I identify the Redmi model from a photo? Yes, but with reservations: 📸 Upload photos to Google Lens – the service recognizes many Xiaomi models. 🔍 Use the IMEI.info Phone Database service – there are photos of all official models. ⚠️ For accurate determination, you need a photo of the back panel (with cameras and a logo) and a tray for SIM-map.