Installation of Xiaomi Mi TV: Installation, connection and configuration in 7 steps

Xiaomi Mi TVs TV They've gained popularity because of the combination of affordable pricing, high-quality imagery and smart features, but even the most advanced device can be a problem if you install it wrong. From choosing a location to fine-tuning the sound, each stage is important for a comfortable viewing experience.

In this article you will find step-by-step instructions for installing Mi TVs. TV All generations, from Mi TV 4A before TV Q2 2026), including wall or rack mounting, peripheral connection and initial system setup, and we will also look at common errors that lead to overheating, poor signaling or incorrect remote control operation.

Particular attention will be paid to hidden Android settings TV 12/13, which the manufacturer does not advertise, but which significantly improve the user experience, such as how to disable forced software updates or configure game mode for consoles.

Preparation for installation: location selection and tools

Before you start editing, evaluate the ergonomics of the space. The optimal distance to the screen depends on the diagonal:

• 📺 32–43 inches: 1.5–2.5 meters
• 🖥️ 50–55 inches: 2-3 meters
• 🎬 65–75 inches: 2.5–4 meters
• 🏟️ 86+ inch: from 3.5 meters

Please note that for models with QLED-matrix (Mi) TV Q1/Q2) Avoid direct sunlight, which reduces contrast. OLED-panels (Mi) TV A2 55") Static content (channel logos) is critical, which can cause pixel burnout.

From the tools you will need:

⚠️ Attention: If the wall is covered with drywall, use special butterfly dowels or mount the TV on the load-bearing wall. TV 55" with bracket exceeds 15 kg - drywall can not withstand!

Packing and inspection of equipment

When unpacking Xiaomi Mi TV If the box is deformed or wet, be sure to videotape the process, which will help with claims against the seller:

• 📦 The TV itself (in protective film)
• 🔌 Power cable (length 1.5 m)
• 🎮 DU remote control (with batteries) AAA)
• 📄 Warranty pass and instructions
• 🔧 Screws for attachment of the stand (if included)
• 📶 Antenna cable (only for models with a DVB-T2)

The Mi models TV P1 And the newest in the box is also an infrared blaster to control other equipment (air conditioning, receiver), which is often confused with a remote control — don't throw it away!

Before you turn on, check the screen for broken pixels.

1. Connect the TV to the outlet.
2. On the remote, pinch the Menu. + Volume Down for 5 seconds – the test mode will start.
3. Check out the monochromatic screensavers (red, green, blue, black).

⚠️ Warning: If you find broken pixels (bright dots on a black background), don't re-enable the TV, which will exacerbate the defect.

3. TV fixing: rack vs wall mounting

The choice between a table stand and a wall bracket depends on your preferences and the interior. Let's consider both options.

Option 1: Installation of a stand

The stand in the kit is usually plastic and designed for a flat surface. TV 55" and larger, we recommend to buy a metal rack (for example, Xiaomi). TV Stand Pro. Installation algorithm:

1. Turn the TV screen down on a soft surface (towel).
2. Put your legs in the sleeves (do not pull them!).
3. Set the TV on the rack and check for stability - it shouldn't swing when you press corners.

Option 2: Wall anchorage

For installation on the wall, you will need a bracket with support for the standard VESA. Xiaomi Mi. TV size VESA diagonally:

• 📏 32–43": 200×200 mm
• 📺 50–55": 300×300 mm
• 🖥️ 65–75": 400×400 mm

Step-by-step:

1. Mark the wall: mark the center of the future location of the TV.


2. Attach a bracket and circle the holes for dowels with a pencil.




3. drill holes (at least 50 mm depth for concrete).




4. Hold the bracket, check the level.




5. Hang the TV on the bracket and fix with screws.

For models with OLED-screen (Mi) TV A2) Avoid mounting in niches - overheating reduces the life of the panel. Optimal clearance to the wall: 10-15 cm.

4. Connecting cables: HDMI, antenna, sound

The wrong peripheral connection is a common cause of the lack of sound or artifacts on the screen.

If you connect the soundbar through HDMI ARC, in the settings of the TV (Settings) → Sound. → Exit HDMI) choose ARC Mode, for Mi. TV Q2 It also supports eARC and supports Dolby TrueHD.

For the antenna, use a cable with a resistance of 75 Ohms. If the signal is weak, connect an amplifier (for example, Xiaomi). TV Antenna Booster, in the menu (Settings) → Channels → Manual settings) select:

• 📡 DVB-T2 TV-TV
• 🌍 DVB-C cable-wise
• 🛰️ DVB-S2 for satellite (requires a receiver)

⚠️ Note: When connecting through HDMI-CEC (Mi Link feature) some devices may conflict. For example, the Xiaomi Mi Box can arbitrarily turn on the TV. CEC customized HDMI, if it happens.

💡

If the TV can’t see the flash drive, format it into FAT32 cluster size 32 KB. NTFS ExFAT is not supported on most Mi models. TV.

5. First activation and configuration of the system

After the power connection, the Xiaomi Mi TV TV It will automatically run the original wizard:

1. Select the system language (Russian is available for all models except Mi) TV 4A for India).
2. Connect to Wi-Fi (5GHz network is preferred for the 4K-content).
3. Sign in to your Xiaomi or Google account (required to access Google Play).
4. Update the software (if a new version is available).

If your TV doesn’t find your Wi-Fi network:

• 🔄 Reboot the router.
• 📶 Check if the TV supports your network frequency (some Mis) TV 4S They don't work 5 GHz).
• 🔑 Make sure that the network name does not contain Cyrillic symbols.

After setting up, be sure to turn off automatic updates (unless you want the TV to update in the background).

Settings → About TV → System Update → ⚙️ → Auto Update → Off.

For Android models TV 12+ (Mi TV Q2) We recommend:

• 🎯 Enable Mode for Movies (Settings) → Display. → Image modes).
• 🔊 Turn off Dynamic Volume (distorts sound at low volume).
• 🛡️ Activate Eye Protection to Reduce Blue Light in the Evening.

💡

Use static. IP-Address for the TV if you connect it to your home media server (Plex, Kodi) and prevent communication loss when you change IP router.

Calibration of image and sound

Even the most expensive Xiaomi TVs come with factory settings that are rarely perfect.

Image setting

Use test videos (e.g. YouTube on request "4K HDR calibration” or embedded tools:

Settings → Display → Additional → Color Calibration

Recommended parameters for Mi TV Q1E (4K HDR):

Sound tuning

Built-in speakers Xiaomi Mi TV weak (power 8-12 W), so for high-quality sound:

• 🎵 Connect the soundbar or AV-receiver HDMI ARC or.
• 🎛️ In the sound settings, select Passover (for external speakers).
• 🔊 Turn off Dolby Digital if your acoustics don’t support it (may cause crackling).

For models with Dolby Atmos (Mi) TV Q2 75) in the Settings menu → Sound. → Select the audio format for Auto (DD+).

💡

To check for the latency (lipsinc), play a YouTube test video with the pops. If the sound lags, reduce the latency in the settings. HDMI ARC.

7. Resolve typical problems after installation

Even if you install it properly, you can have problems, and here are the most common solutions.

If the TV is stuck on the Mi logo, reset to factory settings:

1. On the TV off, press the Menu on the remote.


2. Holding the button, turn the TV on the network.




3.In 10 seconds, the recovery menu will appear.




4. Select Wipe Data/Factory Reset.

⚠️ Warning: After resetting, the TV will require resetting your Wi-Fi and account. If you forget your Mi-account password, restore it in advance at account.xiaomi.com.

For Android models TV 11 and below (Mi) TV 4S) You may need to manually firmware in case of serious failures. Instructions and firmware files are available on the official Xiaomi forum in the Mi Community section. → TV.

FAQ: Frequent questions about installing Xiaomi Mi TV