Modern Xiaomi TVs are not only advanced Android TV software, but also stylish, concise design that easily fits into any interior. However, to enjoy a quality image, the device must be properly installed on a flat surface. The unpacking and assembly process often raises questions among users, especially when it comes to fixing the support legs, which can come in disassembled form or require a specific approach to installation.
Incorrect installation of the supports can lead to unstable position of the screen, risk of falling or even damage to the matrix at the slightest mechanical impact. In this article, we will discuss in detail all the stages of preparation, tools you will need, and nuances of leg mounting for different series of Mi TVs and Mi TV Stick (if there is a dock).
Before you start any manipulation of the new device, it is important to carefully study the equipment, because different models can use different types of mounts, somewhere it is a classic screwdriver screw, and somewhere it is a special latch or bolts with a secret head. Understanding the design of your model is the first step to a successful and safe installation.
Preparation of the workplace and tools
Well, good assembly begins long before you pick up the screwdriver. The first critical step is to prepare the right surface. You need a wide, flat and soft area on which to put the TV down, ideally a large dining table with a tight blanket, or a soft carpet on the floor with a clean sheet.
Never attempt to set legs by holding the TV on weight or leaning it on hard objects with the screen.The matrix is the most fragile and expensive piece of construction, and even a slight pressure at the wrong point can lead to cracks or broken pixels.Make sure there is enough lighting in your area of operation and no foreign objects that can interfere with the process.
As for tools, in most cases, a minimum set is enough to install legs on Xiaomi TVs. Usually everything you need is already included in the package, but having your own quality tools will make it much easier.
- 🔧 Cross screwdriver (usually sized) PH1 or PH2) — screw-pin.
- 🧤 Cotton gloves – not to leave fingerprints on glossy surfaces and frames.
- 📦 TV box – use it as a container for small parts so they don’t get lost.
- 📏 Roulette or ruler - to check the symmetry of the installation of the legs relative to the edges of the body.
It is also recommended to make sure that the TV is placed in its rightful place without carrying the assembled heavy body around the apartment. Remember that a TV with a diagonal of 50 inches or more can weigh significantly more than 10 kilograms, so enlist the help of a second person for the final stage of installation.
Analysis of configuration and types of fasteners
Once you have unpacked the box, don't rush to throw out the packaging materials. Inside you'll find two support legs that can be made of metal or durable plastic, and a package with fasteners. Depending on the Mi TV series (e.g., P1, Q1, A2), the design of the legs may differ. In some models, the legs are single curved elements, in others - a prefabricated structure of a base and a vertical rack.
Carefully examine the contents of the fastener package. The standard set usually includes screws of different lengths and diameters. It is critical to use those screws that are designed to attach legs to the body of the TV. Using too long screws can damage the internal components or the matrix itself, as they will rest on the screen from the inside.
What to do if the screws do not fit?
Special attention should be paid to rubber linings or gaskets, if they are present in the kit. They serve not only for (anti-slip), but also for quenching microvibrations that can be transmitted from the countertop to the TV body, causing sound rattling. Make sure these elements are clean and correctly oriented before installation.
Below is a table that helps identify the main types of mounts found in Xiaomi TVs:
| Type of attachment | Description | Models (examples) | Features |
|---|---|---|---|
| Central rack | One massive leg down the center | Mi TV Stick (dock station), some 32 | It requires a very stable surface, possible backlash on the edges |
| Side-shaped V-shaped | Two legs, attached closer to the edges | Mi TV P1 43", 50", 55" | Most sustainable design, standard for most models |
| Hidden sleds | The legs hide in the grooves on the back panel. | Mi TV Q1, series | Aesthetic appearance, requires accurate hitting the guides |
| Universal openings | A number of holes for different installation options | Most models | Allows you to adjust the width of the leg arrangement |
If you have a central stand in your set, make sure that the cabinet on which it will be installed has sufficient depth. TV with a center leg requires that the center of gravity is strictly above the support, otherwise, if you accidentally touch the corner of the screen, the device can overturn.
Step-by-step instructions for installing legs
Now, to the direct editing, this is a step that requires precision and consistency, so put the TV face down on the prepared soft surface, and make sure there are no foreign objects under the screen, even small crumbs, that may have been left behind after unpacking.
Take the first leg and put it in the right place on the bottom of the TV body, combine the holes on the leg with the threaded bushings on the back, don't screw the leg right away. First, just insert all the screws into the holes and make a little bit of a hand to fix the position of the part.
☑️ Assembly checklist
Repeat the procedure with the second leg. Once both legs are in place and the screws are profited, you can proceed to the final fixation. Use the screwdriver to tighten the screws. Do this evenly: make several turns on one screw, then move to the other to ensure the same pressure and avoid distortion.
Tighten the screws to the point, but without excessive fanaticism. Excessive effort can tear the threads in the plastic bushings of the case or deform the metal of the legs. After all the screws are tightened, gently lift the TV behind the top of the body (without touching the screen) and check the stability of the structure. The device should stand firmly, without wobbling.
💡
Use paint tape to temporarily lock the leg in the right position while you screw the first screw - this will free up one hand and simplify the process.
Importantly, on some Mi TV models, leg holes can be covered with decorative plugs, which must be carefully removed before installation. If the plugs are sitting tight, use a thin plastic tool to avoid scratching the body cover.
Nuances of installation on different surfaces
Once you have a successful set of legs, you're going to have to choose where to put your TV, and the type of surface is going to be the key to the stability of the device, and if you're going to put your TV on a wooden bench, you're not going to have any problems, but modern interiors often dictate their terms using glass, gloss, or soft materials.
When installed on a glass shelf or cabinet, make sure the glass thickness is load-appropriate. TVs with a diagonal of 50 inches create significant point pressure at the points of contact of the legs. The minimum glass thickness for Xiaomi P1 and Q1 series TVs should be at least 6-8 mm of tempered glass. Also make sure that the rubber linings on the legs are clean and free of defects to avoid slipping.
⚠️ Warning: Never install a leg TV on soft surfaces such as a sofa, bed or a fuzzy carpet.The pile can get clogged into technical ventilation holes located at the bottom, causing electronics to overheat and the soft base will not provide a stable support.
If your TV is equipped with a center leg, it is critical that the surface below it is perfectly horizontal. Even a slight tilt of the shelf can shift the center of gravity, and the TV will tilt to one side, in such cases, it is recommended to use the building level to check the horizontal before installation.
For the owners of side-legged televisions, the problem of the width of the bench is relevant. Measure the distance between the outer edges of the legs installed. It should be less than the width of the bench by at least a half. 5-10 It's necessary for stability, and so that you don't accidentally hit or collide the device as you pass by.
In cases where the regular legs do not fit the existing furniture (for example, too widely spaced), some users are considering using universal stands.
Alternative: Wall mounting (VESA)
Although the topic of this article is about leg installation, it should be noted that the presence of legs is not a prerequisite for operation. Many users prefer wall mounting, which frees up space and looks more aesthetic. Xiaomi TVs are equipped with a standard VESA mount, the location and size of which are indicated in the technical passport.
If you decide to give up the legs in favor of the bracket, you still need to do the installation process carefully to avoid losing the components, or you can put them in the box right away. Often the brackets are attached directly to the back, bypassing the mounting places of the legs, but in some universal models, the mounting points can overlap.
When choosing a bracket, pay attention to its load capacity and compatibility with the diagonal of your screen. For large diagonals (55 inches and above), it is recommended to choose brackets with a reinforced design and the ability to adjust the slope, which will compensate for possible errors when drilling holes in the wall and select the optimal viewing angle.
Mounting on the wall requires more serious tools: a punch, level, dowels of the appropriate type (for concrete, brick or drywall). If you are not confident in your abilities, it is better to entrust this work to professional installers, as falling a heavy TV from a height can cause serious damage to property and health.
Typical errors and troubleshooting
Even following the instructions, users sometimes make mistakes that complicate the installation process or operation. One of the most common problems is twisting the screws. If you feel the screw is too tight, stop. Check if the leg is flat, if there is a skew. Trying to force the screw to pull the hat can cause the hat to break, and it will be extremely difficult to remove it.
Another common mistake is to put the TV on an uneven floor, and the floor may appear flat, but the long-legged TV will show all the defects in the screed, which will cause the device to stagger, so you can use special linings under the legs or adjust the height of the legs if the TV model anticipates this possibility (which is rare, but happens in the premium segment).
💡
The key to stability is even weight distribution, and if the TV is wobbly, 90 percent of the time, the problem is not the curved legs, but the uneven surface of the floor or the stand.
Also worth mentioning is the problem of "walking" the TV when you press the buttons on the remote or touch panel. If you touch the logo or control button, the screen shakes markedly, then the legs are not tight enough or the rubber seals have lost elasticity. Try to tighten the screws again or replace the rubber pads with more rigid analogues.
⚠️ Warning: If you find one of the legs is not tightly attached to the body (the gap is visible), do not ignore it in any case. This can lead to gradual loosening of the structure and eventual fall of the TV. Disassemble the knot and check the integrity of the thread and the leg itself.
In rare cases, users experience a defect in the casting of the legs themselves. If you see chips, cracks or obvious curvatures of geometry on visual inspection, do not try to fix this yourself. Contact Xiaomi Service Center to replace the defective part. Operating a TV with damaged supports is prohibited.