How to install legs on the Xiaomi 55-inch TV: instructions with photos and tips

Installing legs on a 55-inch Xiaomi TV is a task that seems simple at first glance, but requires care and nuance. Incorrect installation can cause the device to fall, damage the matrix or even cancel the warranty, especially for thin-body models such as the Mi TV Q1 or Mi TV 5 Pro, where the mounts are hidden under decorative plugs.

In this article, we will discuss the step-by-step installation process, list the necessary tools, show the mounting schemes for different models, and warn you of typical errors, and learn how to avoid skewing the screen and what to do if the legs are not fixed in the grooves. The manual is suitable for most 55-inch Xiaomi TVs, including the series. 4S, 5, Q1 A Pro.

If you've just unpacked the TV, don't rush to throw away the box and components - it often contains a key for mounting legs (usually a hexagon of 4 or 5 mm), as well as an instruction with a unique scheme for your model. The lost key can be replaced with a screwdriver with a suitable tip, but it is better to use the original tool to avoid breaking the thread.

Preparation: What will be required for installation

Before you start, make sure you have everything you need. Most Xiaomi TV 55′′ models come with legs in a box, but sometimes you have to buy them separately (for example, for models with the VESA 300×300 wall mount option).

Here is the minimum set of tools and materials:

• 🔧 Hexagonal key (usually included, size 4 mm or 5 mm)
• ⚙️ Cross screwdriver (for some models, for example, Mi). TV 4S)
• 📏 Roulette or ruler (to check symmetry)
• 🧲 Magnet (optional so as not to lose the screws)
• 🧻 Soft fabric (to protect the screen when rolling over)

Important: Don't use electric tools (shooter, drill) - they can pull over the mounts and damage the plastic case. All screws are twisted only manually with moderate force.

2. Leg mounting schemes for different Xiaomi 55 models

The design of the legs and the location of the mounts vary depending on the series of TVs, and the following table shows the key differences:

If you are not sure about your TV model, check the sticker on the back, which shows the full name (e.g. L55M5-5ARU for Mi TV 5 Pro), and the mounting scheme can be found in the user manual (Installation and installation section).

3. Step-by-step instructions for the installation of legs

Follow this algorithm to avoid errors:

1. Turn the TV down on a soft surface (like a bed or table covered with a blanket) and don’t put it on the floor, which can scratch the screen.
2. Remove the plugs from the mounts (if any). They are usually fixed on the latches - put them with a flat screwdriver or a nail.
3. You can combine your legs with your grooves, and you can see the "L" (left) and "R" (right) tags, and you can't confuse them.
4. Twisting the screws by hand first, then tightening the key. Don't put too much effort into it, because the plastic can crack.
5. Check the stability. If the legs are walking, tighten the screws or check the rubber pads.

Make sure the legs are suitable for the TV model |

Check for all screws and gaskets |

Prepare a soft surface for turning TV|

Turn off the TV from the outlet (if already connected)-->

Tip: If the screws don't screw in, don't push harder! You may have made a mistake in size or you're trying to screw them into the wrong hole. TV Q1 It is often the case that users confuse foot attachments and VESA-bracket.

💡

If the legs wobble after installation, try placing thin rubber circles under them (you can cut from an old bicycle chamber), which will increase the grip on the surface.

4.Typical mistakes and how to avoid them

Even with the seemingly simple process, many users make mistakes that lead to problems.

• 🔄 Left and right legs are mixed up, and this causes a skewed TV set. Most Xiaomi models have legs marked with "L" and "R".
• 🔩 Short or overstretched screws. In the first case, the legs will stagger, in the second case, the thread will break. Optimal effort: the screw should sit tight, but without creaking.
• 📉 Installation on an uneven surface. Even a slight slope can cause the TV to fall. Use the building level to check.
• 🛠️ Using the wrong tools, for example, trying to twist hexagonal screws with a cross screwdriver will lead to the "licking" of the faces.

⚠️ Attention: If the TV is unstable after installing the legs, do not try to press it against the wall with furniture or cargo. This can damage the matrix if you accidentally press the screen. VESA-bracket.

5 What to do if the legs are not fixed

Sometimes users are faced with a situation where the screws are scrolling or the legs do not sit tight.

• 🔧 The plastic case was ripped off, so we can use larger diameter screws (e.g., screws, M5 instead M4) Or insert a plastic dowel into the hole.
• 🧲 The screws don't fit in length. The screws are too short to reach the carving, the screws are too long to touch the board.
• 🔄 Even the visually similar legs can have a different mounting step.

If the problem is not solved, contact the Xiaomi service center - in some cases (for example, in case of factory defect of mounts), repair will be free of charge under warranty.

💡

Before visiting the service center, take photos of the mounts and screws - this will help specialists quickly identify the problem.

6. Alternative installation methods

If standard legs are not suitable for design or functionality, consider alternatives:

• 🖼️ VESA-It allows you to hang your TV on the wall or use swivel mounts. 55" standard VESA 300×300 or 200×200 (specify in the model specification).
• 🪑 Universal legs. They're suitable for most TVs, but they may not match the color. Example: Sanus or Peerless legs.
• 📺 If the legs are lost or broken, you can place the TV on flat furniture (for example, a low cabinet).

In choosing VESA-Note the maximum load for the bracket. For the Xiaomi 55′′ weight is usually 12-18 kg, but it is better to take the mount with a margin (up to 30 kg).

7 Safety: How to protect your TV from falling

Even the legs that are properly set don't guarantee 100% protection.

• 👶 Lock the TV from children. Use special seat belts (for example, Safety). 1st) lantern.
• 🐕 Consider pets. Cats often jump on TVs - install the device away from sofas and shelves.
• 🌪️ Avoid vibrations. Don't put the TV next to speakers with powerful bass or washing machine.

⚠️ Warning: If the TV falls, even from a low altitude, don't turn it on right away! Check the case for cracks, check the integrity of the cables. If you have any doubt, contact the service - internal damage may not immediately manifest itself.

FAQ: Frequent questions about installing legs on Xiaomi TV 55