Why Getting the Right Feet Installed on Xiaomi TV Is Critical for Security
Xiaomi TVs with diagonals from 32 to 75 inches require reliable support, otherwise the risk of falling turns into a real threat to equipment and others. The manufacturer completes most models (for example, Mi TV 4A, Mi TV 5 Pro or Redmi Smart TV X) with standard legs, but their installation often raises questions. Installation errors - from the wrong choice of fasteners to skewed design - can lead to loss of warranty or even damage to the matrix.
In this article, you'll find not only step-by-step instructions, but also hidden nuances that are not written in the official manuals, such as why the Mi TV Q2 needs legs with reinforced bolts, or how to avoid scratching the body when you tighten the screws, and we'll also look at alternative ways of attaching, from universal racks to wall mounting, if the regular legs are lost.
Important: if your Xiaomi TV is in the series OLED (Like Mi. TV Master OLED), The process of installing the legs may differ due to the fragility of the panel. In such cases, we recommend contacting the service center - improper mounting. OLED-In 80% of cases, the pixels are damaged due to point pressure.
What tools will be needed for installation
Prepare the tools you need before you start installation, and a standard set will suffice in most cases, but some models (such as the Mi TV 4S 65) may require additional gearing.
- 🔧 Screwdriver cross (usually) №2) - to tighten the bolts. The TV often comes with a plastic screwdriver, but it does not provide enough force.
- 📏 Line or roulette to align the legs in the center of the body. skewed more than 3 mm can lead to instability.
- 🧲 Magnet (optional) – will help to keep small screws if they fall out of the holes.
- 🧴 Alcohol wipes - to clean seats from factory lubrication or dust.
- 🔨 Rubber hammer (for models with tight fitting of legs) - gently tap the fasteners if they do not stand in place.
If you’ve lost your legs, look for universal wide-adjusted racks (like the VESA 200×200 or 400×400). However, check compatibility with your model before buying – some Xiaomi TVs (like the Mi TV 5X) have custom mounting holes.
⚠️ Note: Do not use metal tools without insulation (such as pliers) near the back of the TV. HDMI 2.1 or eARC.
Step-by-step: how to install legs on Xiaomi TV
Follow this algorithm to avoid typical errors.The instruction is suitable for most models, but there may be additional nuances for the Mi TV Master and Mi TV Lux (see spoiler below).
- Turn the TV down on a soft surface (like a towel or foam). Avoid hard coatings, pressure on the matrix can cause broken pixels.
- Remove the protective stickers from the leg seats (if any). In Redmi Smart TV X models, also unstick the transport film from the back panel, which can interfere with the tight fit of the attachments.
- Try the legs on the holes without tightening the screws: 🔹 The legs are symmetrically located relative to the center of the body. 🔹 Holes on the legs and TV coincide without displacement. 🔹 There is no gap more than 1 mm between the leg and the body (for models with rubber gaskets 1.5 mm is allowed).
Tighten the screws with a cross screwdriver. Start at the top holes, then move to the bottom. The effort should be moderate, the pulled bolts can deform the body.
Check the stability by gently pressing the corners of the TV, and if the legs are playing, relax the screws and align them.
Check the complete set (legs, screws, instructions)
Prepare a soft surface for the TV
Clean the seats of dust
Use a screwdriver with a magnetic tip
Do not make excessive efforts during the delay-->
For models with a center leg (for example, Mi TV Q2 75), the process is simplified by placing one rack in the center, but such TVs require a wider support (at least 40 cm), otherwise they can tip over when tilted.
Features for Mi TV Master and Mi TV Lux
Common Mistakes and How to Avoid Them
Even experienced users sometimes make mistakes when installing legs, and here are the most common ones and ways to prevent them:
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Use of non-native screws | Breaking the thread in the body, cracks | Check the markings on bolts (usually M4 or M5) |
| Tug-tug of anchorages | Deformation of the body, damage to the matrix | Tighten the screws to the point, but without effort |
| Installation on uneven surfaces | Instability, the fall of the TV | Use the building level to check |
| Ignoring rubber pads | Scratches on the countertop, slipping | Always install the pads from the kit |
Pay special attention to models with ultra-thin body (for example, Mi TV 5 Pro). Their legs are often attached at an angle, and if you do not follow the sequence of tightening (first the upper screws, then the lower), the body can bend.
⚠️ Note: If the Xiaomi TV doesn't turn on after the legs are installed, check if the power plumes are affected by the mounts. In lateral-connector models (for example, the Redmi Smart). TV X55) It's particularly relevant.
Alternative ways to fasten: if the legs are not or they are broken
What if your regular legs are lost or damaged? There are several proven solutions:
- 🛠️ Universal racks VESA — are selected according to size (for example, VESA 200×200 for Mi TV 4A 43"). The main thing is to check compatibility with the weight of the TV (indicated in the characteristics).
- 🖥️ Wall mount – if the legs are not critical, you can fasten the TV on the bracket. Xiaomi will fit brackets with a load of up to 30 kg (for example, for Mi). TV 4S 55").
- 📦 Homemade supports are a temporary solution of wooden bars or metal corners, but remember: this is not safe for large TVs (from 55 inches).
- 🔄 Parts from other models - legs from Mi TV 4C fit for Mi TV 4A Check the compatibility of the articles.
If you choose a wall bracket, look for tilt-adjusted models — this is true for Xiaomi TVs with wide viewing angles (such as the Mi TV Q1). Also check if the bracket supports HDMI 2.1 and eARC — some cheap models can block the signal.
💡
Before buying a universal leg, measure the distance between the holes on the back of the TV. Xiaomi can even have different mounts even on the same series (for example, the Mi TV 4A 32" and 43" different mounts).
How to check the stability of the TV after installation
It's not enough to just screw your legs up, you have to make sure the TV is safe. Here's a 4-step test:
- Visual inspection: make sure the legs are tightly attached to the body, without gaps. In models with rubber inserts (for example, Redmi Smart TV X65), make sure that they do not fall out.
- Tilt test: gently tilt the TV forward 10-15°. If it starts to fall, the legs are set incorrectly.
- Slip test: push the TV horizontally slightly. If it moves, put slip-resistant stickers under your legs.
- Cable Test: Connect all the wires (HDMI, power, antenna) and make sure they don’t pull the TV sideways.
For added safety, you can use a safety belt that is attached to the legs and fixed to the wall, which is especially true for homes with children or pets.
⚠️ Note: If the Xiaomi TV makes extraneous sounds (squeaking, crackling) after installing the legs, immediately loosen the mounts and check the integrity of the body. TV 5 Pro) this may indicate deformation.
Where to buy original legs for Xiaomi TV
If you need a homemade leg, refer to the official sources:
- 🛒 Xiaomi official store (mi.com) – guaranteed original parts, but the price may be higher than the market.
- 🌍 AliExpress – look for sellers with a rating above 98% and reviews about compatibility with your model, MDZ-23-AB for Mi TV 4A).
- 🔧 Service centers -- often sell used legs from TVs that have been repaired. Price is lower, but check the condition of the carvings.
- 🏬 Electronics stores (for example, "Svyaznoy", "M. Video") - sometimes there are universal legs under the control of the Internet. VESA, Xiaomi-compatible.
The cost of the original legs varies from 500 to 2500 rubles depending on the model. For example, the legs for the Mi TV Q2 75" will cost more than for the Redmi Smart TV X32, due to the reinforced design.
💡
Before buying legs, check their article in documents for the TV or on the official website. Even visually identical legs can differ in internal design (for example, the Mi TV 4S and 4C have different mounts).