Residual image on the screen Xiaomi Redmi Note 8: how to remove the effect of the “ghost”

Why is the Xiaomi Redmi Note 8 screen left with a shadow from the image?

If your Redmi Note 8 after a long display of static elements (icons, navigation panels, logos in games) are barely noticeable contours – this is the effect of the residual image (or burn-in). Unlike broken pixels, which manifest as colored dots, burn-in looks like gray "ghosts" against a homogeneous background. AMOLED-screens, but may appear on the screens IPS-matrices under extreme loads.

Causes of:

• 📱 Long-term display of static elements (e.g., notification panels in games or navigation bars).
• 🔥 Overheating of the screen at high brightness in hot weather.
• ⚡ Using the phone at maximum brightness (>80% more than 6 consecutive hours.
• 🕹️ Frequent gaming sessions with HUD-elements (card, health, mana).

It's important to distinguish burn-in from matrix artifacts. If the shadows are only visible on a gray/black background and disappear when you change the picture, that's the residual image. If the defects are static and don't change, then there's a physical degradation of the matrix that requires a screen replacement.

Method 1: Software Screen Cleaning (without root)

The Redmi Note 8 has built-in tools to minimize the burn-in effect. They will not remove the ghosts completely, but will reduce their visibility.

Step 1. Include burnout compensation:

1. Go to Settings → Display → Additional display settings.
2. Activate the option Burnout Compensation (if available).
3. Set the Automatic Screen Shutdown Timer for 30 seconds.

Step 2. Use the white screensaver:

• 📄 Download the White Screen app (or similar).
• 🔦 Run it for 1-2 hours at maximum brightness.
• ⚡ Repeat the procedure 1 time per week for prevention.

Charge your phone to 100% | Set brightness to maximum |Close all background apps |Use the original power supply

-->

⚠️ Warning: Don't leave your white screen phone unattended - this can cause overheating.Controll temperature via Settings → Battery. → Status.

Method 2: Hardware reset (if software methods do not help)

If the ghosts remain even after the software cleaning, try resetting to factory settings.This will not remove the physical burnout of the matrix, but will reset the color reproduction settings that could aggravate the effect.

Instructions:

1. Create a backup of data through Settings → Additional → Backup.
2. Go to Settings → About the phone → Reset settings.
3. Choose to erase all data and confirm.

After discharge:

• 🔄 Don’t restore settings from backup – set your phone up as new.
• 📵 Turn off Adaptive Brightness in the Display Settings.
• 🎨 Set a theme with a dark background (for example, AMOLED Black in Themes).

💡

If the residual image appeared after the phone fell, do not try to eliminate it programmatically - it may be a microcrack of the matrix.

Method 3: Calibration of colors (for experienced users)

On the Redmi Note 8, you can manually adjust the color balance to visually “disguise” burn-in. This method requires accuracy and is only suitable for minor defects.

How to set up:

1. Install the Lux Auto Brightness app.
2. In the application settings, select Color Temperature.
3. Smoothly adjust the slider towards the Cold (cold hue) until the "ghosts" become less noticeable.
4. Keep your profile with the name Anti-Burn-In.

Alternatively, use ADB for calibration:

adb shell settings put system screen_color_temperature 12000

Where 12000 is the color temperature (experiment with the range 6500-15,000).

⚠️ Attention: Incorrect color temperature settings can cause eye fatigue. After calibration, check the comfort of the display on different types of content (text, video, games).

When is the residual image a reason for repair?

If the ghosts are visible on any background (including white), have clear boundaries and do not disappear after 24 hours of downtime, this is a sign of irreversible degradation of the matrix, in which case the software methods are useless, and a replacement of the screen is required.

Signs of critical burn-in:

• 🔍 «Shadows are visible even on a bright white background.
• 📉 The contrast of the screen has dropped significantly (colors have become faded).
• 🔥 Defects appeared after overheating (for example, after charging in the sun).
• 🛠️ The screen was previously repaired (possibly a poor-quality matrix installed).

The cost of replacing the screen with the Redmi Note 8 (as of 2026):

• Original matrix: 4,500–6,000 ₽ (work).
• Analogue (Chinese): 2,500–3,500 ₽ (Risk of re-burn-in after 6-12 months).

💡

Replacing the screen in an unofficial service can lead to loss of leakage of the case and dust falling under the matrix. Always check the warranty for work (at least 3 months).

Prevention: How to prevent residual images?

Avoiding Burn-in completely IPS-Redmi Note 8 screen is impossible, but you can significantly slow down its appearance:

Recommendations:

• 🌓 Use Dark Theme in Settings and Apps.
• ⏱️ Reduce the screen shutdown time to 15-30 seconds.
• 🔋 Do not leave your phone on charge with the screen on (especially at night).
• 🎮 In games, turn off the display HUD-elements, if they are not needed.
• 🔄 Regularly change the wallpaper and the location of icons on the desktop.

For owners of Redmi Note 8 Pro (C) AMOLED-The risk of burn-in is higher:

• 📊 Install Screen Balance app to monitor pixel wear.
• 🔄 Enable Pixel Shift in Developer Settings (Settings) → The phone. → Version. MIUI — tap 7 times).

Frequent mistakes when trying to remove burn-in

Many users compound the problem by following questionable advice from the Internet.

Dangerous methods:

• 🔥 Heating the screen with a hairdryer - this can finally damage the matrix or peel off the plume.
• ⚡ Using apps to overclock pixels (like Screen Burn-In Fixer) – they only speed up wear and tear.
• 🧲 Magnets – This does not affect burn-in, but can disrupt the Hall sensor.
• 💧 Attempts to “wash” the screen with alcohol – the defect is inside the matrix, not on the surface.

Also avoid:

• 🔋 Charging your phone at high temperature (such as in the sun or near a heater).
• 📺 Long-term video viewing with fixed subtitles or channel logos.
• 🎮 Games with high screen brightness (>70% more than 3 consecutive hours.

💡

If you notice burn-in on a new phone (under 6 months), contact the service center under warranty. the manufacturer can replace the screen for free, if the defect is not caused by mechanical damage.

FAQ: Answers to Frequent Questions