Owners of popular security systems often face the need for physical access to the insides of the device. Disassembly Xiaomi Mi 365 may be required to replace the saturated battery, clean the optics from dust or restore the rotation mechanism. Despite the monolithic appearance, the design of the gadget allows dismantling, but requires extreme caution and the presence of a specific tool.
Before you start work, you need to be clear about the risks. Any violation of the integrity of the shell automatically deprives you of warranty service in authorized centers. If the device is under warranty, it is wiser to contact the service center, but if the warranty period has expired or the damage is mechanical, self-repair will be a cost-effective solution.
In this guide, we will take a detailed look at the process of opening the case, disabling the plumes and properly assembly. You will learn which screws are hidden under the stickers, how to safely disconnect the control board and what to look for when working with fragile plastic latches. Inside the base body of the Mi 365 is a lithium battery CR123A, which is not rechargeable and requires replacement when discharged.
Preparation of the workplace and necessary tools
You can't do a good job of disassembling without proper preparation. You'll need not only a set of screwdrivers, but also plastic tools to keep a glossy surface of the case. The main tool is a PH00 or PH0 cross screwdriver, because the screws in Xiaomi are usually miniature.
Plastic mediators, old bank cards or specialized blades for opening smartphones are ideal for opening the latches. The use of metal objects such as a knife or a stiletto is highly undesirable, since there is a high risk of damage to internal components or scratching the motherboard.
☑️ Disassembly tools
Also, prepare a screw folding tank, as they can vary in size, and it will be fatal to confuse them when you assemble them. You will need tweezers to manipulate small plumes and connectors. The workplace should be well lit and the surface should be clean and conductive.
Primary dismantling of the external housing and search for fasteners
The process begins with a visual inspection of the device. At first glance, it may seem that there are no screws at all, but Xiaomi manufacturer traditionally hides fasteners under decorative elements. First of all, turn the camera upside down and carefully examine the circular platform.
Under the main white sticker with serial number and QR-The code usually hides two screws. Gently peel off the edge of the sticker or, if the model allows, warm it up with a hairdryer for easier removal to access the fastener.
⚠️ Warning: Don’t try to force the top of the body. Xiaomi Mi 365 plastic is quite fragile, and excessive force will lead to breakage guides or cracks in the visible part.
To separate the halves of the body, use a plastic blade. Put it in the joint between the top and bottom and gently swipe around the perimeter, freeing the latches. A characteristic click will signal the successful opening of the lock. Move slowly, controlling the pressure force.
The Secret of Hidden Helices
Power outage and work with electronics
Once you remove the outer casing, you'll see the inside of the camera, and the first thing you need to do is to turn off the system to avoid short circuits when you're manipulating the boards, and find the battery connector and gently disconnect it from the motherboard.
The connectors in this model are quite tight, so you need to pull on the plastic connector itself, not the wires. Sharp movements can cause the wiring to break, which will require soldering to recover. Be careful about the location of the plume connecting the stationary part to the rotary mechanism.
| Component | Function | Feature of dismantling |
|---|---|---|
| Battery | Standby power | Requires a tidy disconnection of the connector |
| Wi-Fi module | Network connection | Located under a metal screen |
| Turning engine | Rotating the camera | Connected by a plume to the main board |
| Objective | Videotape | Requires calibration after replacement |
If your goal is to replace the battery, after the plume is turned off, the old element is removed from its seat. Set up a new battery, making sure the polarity is correct, and plug the connector in before the characteristic click. Check the reliability of the contact before the final assembly.
Disassembly of the rotary mechanism and cleaning of optics
The most common cause of disassembly is a spinning machine getting stuck or getting dust on the lens, and to access the motor and gears, you have to dismantle the engine control board, and it's secured by a few screws that you have to unscrew.
Remove the board by first disconnecting the plume that goes to the lens. Here the utmost accuracy is important: the plumes are very thin and easily torn. Once the board is removed, you can access gears that are often clogged with dust and old lubrication.
Clean the gears of old lubrication and dirt using isopropyl alcohol and cotton swab. Apply the new silicone lubricant in a thin layer. Excess lubrication can cause dust to stick in the future, so follow the measure. Collect the mechanism in reverse order.
Replacement of speaker and microphone
Sound problems are another reason to interfere with the device: the speaker in the Xiaomi Mi 365 is located at the bottom of the case and often closed with a grid.
The speaker is connected to the board by two thin wires. It's important not to confuse polarity when replacing, although in most cases the connectors have a unique shape that eliminates error. The microphone is usually soldered directly or connected with a short plume next to the lens.
⚠️ Warning: When installing a new speaker, make sure it fits tightly to the body. The gaps can cause resonance and unpleasant buzzing when the device is running at high frequencies.
Sound quality checks are done before all screws are turned, plug the camera into power, wait for the download, and through the Mi Home app, initiate a test recording or two-way communication, and once you're done, complete the assembly.
Device assembly and function testing
The final step is assembly. You go in reverse: set the boards, connect all the plumes, check the reliability of the connectors, stack the wires so that they don't fall under the rotating parts of the machine.
Connect the halves of the body, pressing the perimeter until all latches click. Twirl the screws at the base and return the decorative sticker to place. If the sticker has lost stickiness, use double-sided tape to cover the opening marks.
💡
After assembly, be sure to wipe the camera lens with a microfiber. The fingerprints left during the repair process will significantly worsen the quality of night shooting and create glare from IR illumination.
Connect the camera to the network and launch the app. Check the horizontal and vertical rotation, image quality and IR backlighting in the dark. If all functions are working properly, the repair can be considered successful.
💡
The main success of the dismantling is the sequence of actions and the lack of rush, remember the order of disconnecting the plumes, so that when you build it, you do not damage the fragile contacts.