Modern smartphones with large screens require a serious approach to maintenance, especially when it comes to such oversized models as the Xiaomi Mi Max 3. This device stands out as a huge display and a capacious battery, but these features make the process of disassembling it specific and require accuracy. Owners often face the need to replace the battery or screen, as over time the battery loses capacity, and the display can suffer from falls.
Disassembling the Mi Max 3 is not just a lid removal, as in old push-button phones, but a complex engineering process that requires understanding the design of the device. Adhesive joints and hidden screws create additional obstacles for the inexperienced user. Wrong actions can lead to damage to plumes or cracks in the glass, so it is important to follow the algorithm of actions clearly.
In this article, we will take a closer look at how to safely disassemble your smartphone, what tools you need and what nuances you should pay attention to. We will not use complex technical terms without explanation, so that even a beginner can cope with the task. Preparing a workplace and having a quality tool is already half the success in mobile repair.
Tools and workplace preparation required
Before you start opening the case directly, you need to organize a comfortable and safe space. You will need a perfectly flat surface with good lighting, so you do not lose the small cogs and see the state of the plumes. The lack of static electricity is also critical, so it is recommended to use an antistatic bracelet or simply touch a grounded metal object before starting work.
For high-quality disassembly Xiaomi Mi Max 3 you will need a specialized set of tools that can be purchased in electronics stores. The use of improvised tools such as kitchen knives or needles is strongly discouraged, as they can damage the internal components or scratch the body. The minimum set includes a hairdryer, sucker, mediators and a set of screwdrivers.
☑️ Disassembly tools
Special attention should be paid to the choice of screwdrivers, as the design of the smartphone uses screws of different types and sizes. Most often, screws with Phillips and Torx slats are found, so make sure that your bits exactly match the size of the screw heads. Using the wrong screwdriver will lead to slicing of the faces, which will greatly complicate further assembly of the device.
⚠️ Warning: Before starting any work, be sure to completely turn off the smartphone. Attempting to disassemble the enabled device can lead to a short circuit and failure of the motherboard.
Removal of the back cover and primary diagnosis
The opening process of the Mi Max 3 begins with the removal of the rear panel, which is attached to the two-part glue. This glue hardens over time, so to soften it, you need to evenly warm the perimeter of the body. Use a hair dryer, setting a temperature of about 80-90 degrees, and warm the edges for 2-3 minutes, constantly moving the flow of hot air.
After warming up, gently insert the suction cup into the bottom of the back cover and pull up slightly, creating a small gap. Insert a thin plastic mediator or scalpel blade into the resulting gap, trying not to damage the fingerprint scanner plume if it is located at the back. Move the mediator along the perimeter of the case, gradually cutting the adhesive layer.
- 🔥 Warm up the body evenly, without holding the hair dryer for a long time at one point to avoid overheating the battery.
- 🛡️ Use only plastic tools to snap latches, metal can damage antenna modules.
- 👁️ Carefully monitor the location of the plumes, so as not to touch them with the sharp edge of the tool.
When the glue is cut all around the perimeter, you can gently lift the back cover. Don't make sudden movements, because various elements may be glued to the lid or thin antenna wires may pass through. After removing the lid, conduct a visual inspection of the insides for battery bloating or contact oxidation.
What to do if the lid does not open?
Dismantling the protective panel and disconnecting the plumes
When you remove the back cover, you'll see an internal structure that's covered by a plastic safety panel, and this panel is fixed by a lot of screws of different sizes, so it's very important to follow the order of how you twist and fold them, and you'll best use a magnetic mat or a sheet of paper with a markup, where you'll spread the screws according to their location.
The first step is to disconnect the battery plume from the motherboard, a critical step that shuts down the device and prevents accidental short circuits as you go ahead. Use a plastic blade or gloved finger to detach the connector, avoiding using metal tools near the board.
Next, unscrew all the visible screws that attach the plastic pad, and carefully remove it. Under it hides the camera modules, the main plume of the display and other important components. When removing the panel, be careful with the main camera module, which can be slightly glued or sit tightly in your socket.
| Type of screw | Location. | Number of | Features |
|---|---|---|---|
| Phillips #00 | Fixing fees | 4 pcs. | Average size |
| Torx T2 | Sticking the speakers | 2 pcs. | Small, easy to lick. |
| Phillips #000 | Protective screens | 6 pcs. | Very small. |
| Self-tasher | Fixing fees | 2 pcs. | Black, by the edges. |
⚠️ Warning: Never pull the plumes with your fingers or tweezers. Always snap the connectors gently, putting them on special protrusions or edges.
Replacement of the battery and work with the battery
One of the most common reasons for disassembling the Xiaomi Mi Max 3 is to replace the battery, as the large battery capacity degrades over time.The battery in this model is glued to the body quite firmly, and it will take patience to extract it.
To extract safely, use a plastic card or a special tool with a thin blade. Carefully tuck the edge of the battery and, slowly moving along the adhesive layer, separate it from the body. If the glue is too hard, you can slightly warm up the battery area with a hairdryer, but you need to do this very carefully so as not to overheat the battery itself.
When installing a new battery, make sure you use an original spare part or quality equivalent with a protective controller. Connect the new battery plume to the motherboard before putting it in place to check the device's health. Only after successful activation can the battery be fixed in the case with a new layer of glue.
💡
Use special adhesive tapes (B-7000 or analogues) to fix the new battery, apply a thin layer of glue to the body, not the battery itself, and let it dry a little before pressing.
Removal of the display module and touch screen
Replacing the display in the Mi Max 3 is a complex process, because the screen is large and fragile. Accessing the display mounts often requires the motherboard to be completely removed, which increases the risk of damage to other components. If your goal is to replace only the glass (touchscreen), then it is almost impossible to do this at home without a separator and a laminator.
The process begins by disconnecting the display and touchscreen plumes from the motherboard, then unscrewing the screws that hold the display frame, and in some cases, the display module can be glued to the frame, requiring additional warm-up and careful separation of components.
- 📱 Turn off the display plumes only after the battery is turned off.
- 🌡️ Warming up the frame is mandatory if the display is glued around the perimeter.
- 🧤 Work with gloves to avoid leaving greasy marks on the new matrix.
When you install a new module, check it before it's finalized, plug in the plumes, turn on the phone, check for broken pixels, full-size touchscreen, and proximity sensors, and if everything's working properly, you can start the final assembly and apply the new adhesive layer.
Assembly of the device and verification of functionality
The final stage of dismantling Xiaomi Mi Max 3 is the assembly, which is done in reverse order. Make sure that all the plumes are securely snapped in the connectors and the screws are twisted with the right force. Tightened screws can damage the plastic, and untwisted screws will lead to backlashes and creaks of the case during operation.
Pay special attention to the rear cover installation, the old glue is better removed completely from the frame, degrease the surface and apply a new adhesive base, this can be a special double-sided tape, pre-cut in shape, or liquid glue B-7000, which is applied with a thin strip around the perimeter.
💡
The build quality directly affects the moisture protection and durability of the smartphone, so do not skimp on adhesive materials and pay attention to the cleanliness of the surfaces.
Once the lid is glued, hold the device with rubber bands or loads for a few hours until the glue is completely dry, turn on your smartphone and perform a full diagnostic: check the sound, vibration, camera performance, Wi-Fi, Bluetooth and touch screen. If all tests are successful, you can consider the repair complete.