How to properly fasten your legs to the Xiaomi TV: instructions with photos and tips

Installing legs on a Xiaomi TV is a challenge that every customer faces after unpacking the device. Despite the apparent simplicity, the process requires care: improper mounting can lead to a TV drop, damage to the matrix or even cancellation of the warranty. In this article, we will analyze the step-by-step instructions for all popular Mi TV models (including Mi TV 4S/4A/5/5 Pro/Q1/Q2), explain the types of mounts, necessary tools and typical errors.

Xiaomi TVs feature unified leg holes, but different fastener sets depending on the diagonal. For example, the 55 and 65 models often use plastic legs with metal inserts, and for the Mi TV Q1/Q2 – aluminum racks with rubber pads. If you lost the original legs or want to replace them with universal, we will also consider options for compatibility with third manufacturers.

What tools will you need

You don't need a professional tool to install the legs on your Xiaomi TV, but without the right screwdrivers and accessories, it can take a long time.

• 🔧 Cross screwdriver (usually suitable size) PH2, But some models are needed. PH1).
• 📏 Line or roulette – to align the legs in the center.
• 🧲 Magnetic screwdriver or screw holder (optional, but simplifies work in hard-to-reach places).
• 🧴 Alcohol wipes - for cleaning holes from factory lubrication.
• 🔨 Rubber hammer (for tight plastic fasteners only, not for metal fasteners!).

If the set with the TV was not a screwdriver (and this is for budget models Mi TV 4A), do not use the first one you get - the inappropriate size of the cross slit can tear the edges of the screws, after which they will be difficult to unscrew without damaging the body.

Types of legs for Xiaomi TVs

Xiaomi uses three main types of legs for its TVs, which differ in material, design and mounting method, and knowing these features will help avoid installation errors:

Important: Mi TV 5 Pro legs are not compatible with Mi TV 4S due to different hole spacing (VESA 200×200 vs VESA 400×200 standard).

⚠️ Attention: In Mi models TV Q2 75" legs are angled - if you set them curved, the TV will "walk" when you press the screen. Before tightening the screws, check the symmetry with the level.

Step-by-step instructions for installing legs

The process of attaching the legs is the same for most Xiaomi models, but there are nuances depending on the type of fastener.

1. Prepare the work surface. Put the TV screen down on a soft cloth (like a towel) or a special mat. Avoid hard surfaces, pressure on the matrix can damage it.
2. Remove the safety stickers. The back of the TV usually has stickers that cover the holes under the legs. Carefully remove them without damaging the serial number label.
3. Try on the legs. Apply the legs to the body before screwing, and make sure the holes match. In the Mi TV 5 Pro models, there are two options for attachment, for narrow or wide legs.
4. Hold your legs. Start with the top screws, then move to the bottom screws. Tighten them cross-to-cross to avoid skewing. Optimal force of the puff is to stop, but without excessive effort (especially for plastic legs).
5. Check the stability. Carefully place the TV on your legs and slightly press the top corners of the screen. If the TV is wobbling, tighten the screws or check the symmetry.

Check the complete set (screws, legs, instructions)

Prepare a soft surface for the TV

Remove protective stickers from the holes

Use a screwdriver of the appropriate size

Do not tighten the screws to the end immediately (first make money)-->

Models with aluminum legs (such as the Mi TV Q1) may require additional height adjustments.Twisting the legs clockwise to align the TV if it is uneven.

💡

If the screws don't screw in, don't push harder! Clean the carvings in the grease holes with an alcohol napkin and try again.

Frequent Mistakes and How to Avoid Them

Even with the seemingly easy setup of the legs, users often make mistakes that lead to breakages, and here are the most common ones:

• 🔄 Helical hauling, especially for plastic Mi models TV 4A — This causes cracks in the attachment points, optimal force: the screw should sit tight, but not "creak" when tightening.
• 📐 If the legs don't get straight, don't try to squeeze them in by force. See if you've confused the left and right legs (in some models, they're asymmetrical).
• 🧲 Loss of screws.Combined with Xiaomi TV often comes spare screws - don't throw them away!If the original screws are lost, use analogues with the same thread (M4×12 most models).
• 🔌 Ignoring rubber pads. In Mi models. TV Q2 between the leg and the body should be rubber inserts - without them, the TV will slide on the surface.

⚠️ Warning: If the TV is uneven after the legs are installed, do not put books or other objects under it! This can cause the vents to overheat. Instead, adjust the height of the legs (if the model allows it) or buy special anti-slip stands.

Another common problem is that the legs creak when you press the screen, and it's because the screws aren't tight enough or there's no lubrication in the plastic mounts, so you can unscrew the screws, put some silicone grease on the thread, and then spin it back.

Compatibility of legs with different models Xiaomi

If you have lost the original legs or want to replace them with more stable ones, it is important to consider the VESA standard and the spacing between the holes.

For Mi TV Q2 75 models, it is almost impossible to find universal legs due to the unusual location of the holes. If the original legs are lost, the only option is to order them from the official Xiaomi dealer (article: MDZ-23-AB for the 75-inch version).

Alternative fastening methods

If standard legs don’t suit you (for example, due to limited space on the stand), consider alternatives:

• 🖼️ Wall mount. Xiaomi TVs are suitable brackets with support VESA 200×200 or 400×300. Popular models: OmniMount OE220 (for 43–55"), Sanus VLT6 (for 65–75").
• 🪑 Universal stands. Duronic, for example. DM3280 — adjustable rack compatible with most Mi models TV (except Q2 75").
• 🔧 I made it with my legs, if you have them. 3D-You can print the printer legs from the drawings from Thingiverse (search on request "Xiaomi Mi") TV legs»).

When choosing a wall mount, pay attention to the maximum load - Xiaomi TVs weigh from 8 kg (Mi TV 4A 32) to 30 kg (Mi TV Q2 75"). For example, for Mi TV 5 Pro 65" (weight ~22 kg) fit bracket with a safety margin of up to 40 kg.

⚠️ Attention: If you are installing a TV on a drywall, use special butterfly dowels or mount a bracket on a bearing profile.Mi TV Weight TV Q2 75" (28 kg) can snatch conventional dowels from drywall.

Security after installation

Even if the legs are set correctly, the TV remains vulnerable to falls, especially in homes with children or animals.

• 👶 Hold the TV on the sidewalk. Use rollover belts (e.g. Safety) 1st TV Straps that are attached to the back of the TV and furniture.
• 🐕 Remove the wires from the floor. Animals or children can grab the cables and pull the TV over themselves. Use cable channels or clips to attach the wires to the wall.
• 🌡️ Observe ventilation gaps. Between the TV and the wall (or the cabinet) should be at least 5 cm of free space for air circulation.
• 🔌 Check the stability when connecting devices. If you often connect / disconnect HDMI-cables, make sure the TV does not shift when you press the ports.

For models with narrow legs (for example, Mi). TV 4S 55) It is recommended to use base extenders - plastic or metal plates that increase the support area «TV base extender»).

💡

Even if the TV is stable, always fix it on a stand or wall – this will prevent a fall in earthquakes or accidental tremors.

FAQ: Frequent questions about leg installation