How to properly fasten your legs to the Xiaomi Mi TV TV 4S 43: instructions with nuances

Installation of legs on the TV Xiaomi Mi TV 4S 43 is a seemingly simple task, but many users face difficulties: mismatching holes, weak fixation or even damage to the body when installed improperly. In this article, we will analyze the process from A to Z - from tool preparation to testing the stability of the finished structure.

Features of the model 43-inch Xiaomi 4S in a non-standard arrangement of fasteners: the manufacturer uses a unique fixation system, which differs from the classic ones VESA-This means that the legs are from other brands (such as Samsung or Samsung). LG) This is not a good place to go, just original accessories or certified analogues, and we're going to show you how to avoid common mistakes and securely fix the TV on your desk or stand.

Important: if you bought a TV without legs (for example, in the version for wall mounting), they will have to be purchased separately — MDZ-21-AM. Check the equipment before starting work!

What legs are suitable for Xiaomi Mi TV 4S 43?

Xiaomi Mi TV TV 4S 43 (model L43M5-5ASR) complete with two types of legs:

• 🔧 Standard plastic legs - go in the basic configuration, have a width ~65 cm and fixed to 4 screws, suitable for tables with a width of 80 cm.
• 🖥️ Narrow metal legs (option) – sold separately, take up less space (width) ~40 cm), but require a stronger surface.
• 🔄 Universal. VESA-adapters – if you want to use mounts from other brands, you will need an adapter with markup 200×200 mm.

The original legs are marked Xiaomi on the inside and come with a set of screws. M4×12 If you lose your fastener, buy a similar stainless steel screw -- regular iron screws can rust over time. M4×10 mm M4×14 mm will not fit: they will either not disintegrate, or damage the plastic bushings inside the case.

Warning: legs from Xiaomi Mi models TV 4A or Mi TV 4 are not compatible with 4S Because of the different arrangement of the mounts, even if they look the same, the holes won't match!

Preparation for installation: tools and safety

Before you start to move your legs, prepare:

• ⚒️ Screwdriver cross (preferably magnetic, so that the screws do not fall).
• 🧲 Magnet - will help to keep screws when twisting in hard-to-reach places.
• 📏 Roulette or line – to align the legs symmetrically.
• 🧴 Alcohol wipes - for cleaning holes from dust and factory lubrication.
• 🔦 Lantern - lighting will help to see the marking on the body.

Place the TV down on a soft surface (like a bedspread or foam). Don't put the TV on a hard surface (table, floor) without protection, it can damage the matrix even with a light tap. If you work alone, ask someone to cover the case when you roll over.

⚠️ Warning: don't force when screwing! plastic bushings inside Xiaomi's body 4S fragile - if you pull, they will crack, and the legs will dangle.

Check if there are any warning stickers on the body, like some Mi batches. TV 4S There is a sticker that says "Max Load: 15 kg" - meaning that the legs are designed for the weight of the TV. + an additional 7 kg (e.g. soundbar or decorative panels).

Make sure the legs are suitable for the model L43M5-5ASR|

Clean the holes from dust with alcohol|

Prepare everything. 4 screw (M4×12 mm)|

Put the TV on a soft surface with the screen down|

Check the symmetry of the leg markings-->

Step-by-step: how to twist the legs

Follow this algorithm to avoid skewing and damage:

1. Step 1. Match the legs to the body. On the back of Xiaomi 4S 43 has 4 holes, two closer to the center and two at the edges. The legs should fit perfectly on these points.
2. Step 2. Put the screws in the holes. Start with the top mounts. The screws must come in without effort -- if you feel resistance, check if the dirt is in the thread. Don't twist them all the way through!
3. Step 3. Tighten the screws cross-cross. First, tighten all 4 screws slightly, then twist them in diagonal sequence: top left → lower-right → upper-right → It's the bottom left. It's gonna prevent skewing.
4. Step 4: Check the stability. Put the TV upright carefully, and with a light tap, check if it's wobbling. If the legs are "playing," loosen the screws and spin again.

The optimal moment of tightening is when the screw stops turning by hand, but does not require force. If you use a screwdriver, set a moment of 2-3 Nm (no more!).

💡

If the screws are scrolling and not fixed, drop a superglue hole (not a gel!) and let it dry for 10 minutes, which will strengthen the plastic bushings inside the case.

The photos below show the correct and incorrect position of the legs:

Common Mistakes and How to Avoid Them

Even with the seeming ease of editing, users often make mistakes that lead to breakdowns.

• 🔄 Twisted screws → cracks in plastic bushings or a thread failure. Solution: use a dynamometer screwdriver or twist it by hand.
• 🔀 Uneven leg setting → Solution: Check the symmetry with a ruler until the final puff.
• 🔧 Inappropriate screws → So, the legs are hanging or not screwing. M4×12 mm threaded 0.7 mm.
• 🧲 Metal shavings inside the body → Solution: Clean the holes with a vacuum cleaner before you work.

If the TV is wobbly after installation, check:

1. The level of the table surface (use the level).
2. Status of rubber gaskets on legs (they could fly off during transportation).
3. Tightening of screws - sometimes they spontaneously weaken after 1-2 weeks.

⚠️ Warning: If you have vertical stripes or artifacts on your screen after you've edited it, turn off the TV immediately! This is a sign of damage to the matrix plume due to excessive pressure on the body.

How to remove legs if you need to transport the TV

To transport or replace the legs with a bracket, you have to dismantle them.

1. Place the TV screen down on a soft surface.
2. Unscrew all 4 screws counterclockwise.
3. If the screws don't lend themselves, spray them. WD-40 And wait 5 minutes.
4. Remove the legs, holding the body - they can "jam" due to deformation of the plastic.

Keep the screws in a bag with legs so you don't lose them. When you re-install, check the thread: if it's damaged, replace the screws with new ones.

💡

Never pull the legs to the sides when dismantling - this can break the plastic guides inside the case. Always unscrew the screws completely, and then gently move the legs along the case.

Alternative fastening methods: VESA and

If regular legs do not suit you (for example, because of a narrow cabinet), consider alternatives:

• 🖥️ VESA-The bracket allows you to hang the TV on the wall. 4S 43 markup 200×200 Uh, you'll need an adapter. MDZ-23-AM (~1500 ₽).
• 🪑 Universal rack – a metal stand with adjustable width (for example, Sanus) VLT6-B1). Suitable for TV weighing up to 20 kg.
• 🔧 Homemade legs are made of aluminum profile or wood, require accurate measurements and tooling skills.

In choosing VESA-crib-line, pay attention to:

• Maximum weight (for Xiaomi) 4S 43 - up to 10 kg).
• Adjusting the angle of inclination (useful for combating glare).
• The presence of cable channels (hide wires).

If you decide to use a bracket, note that:

• Drywall walls require special dowels (e.g. Fischer DuoPower).
• The distance from the wall to the TV should be at least 5 cm for ventilation.
• When drilling, avoid getting dust into the holes of the body.

What to do if your legs are broken or lost

If the original legs have fallen into disrepair, you have several options:

1. Buy original parts. Feet for Xiaomi Mi TV 4S 43 are sold in official stores (for example, on AliExpress or Mi Store). ₽. Check the articulation: MDZ-21-AM (plastics MDZ-22-AM (metal).
2. Use universal legs. Adjustable width legs (e.g. Duronic) are fine. DM3280). The main thing is that the distance between the mounts coincides with 200 mm.
3. Make your own legs. You'll need an aluminum corner to do that. 30×30 mm, drill and screws M4. The drawings can be found on the forums (for example, 4PDA).
4. If you're not sure about your abilities, the master will replace your legs for 500-1000. ₽ (detailless).

Warning: Do not use legs from other Xiaomi models (e.g. Mi) TV 4A 43) - despite the similar size, the mounts will not match, and the TV will be unstable.

If the legs are cracked, but the screws are still holding, you can strengthen the structure with epoxy:

1. Remove the legs and clean the cracks from dust.
2. Apply a thin layer of resin (such as "Moment Epoxyline") to the inside.
3. Press the legs with a scrubbin and leave for 24 hours.
4. Install back, but don't tighten the screws too much.

FAQ: Answers to Frequent Questions